CONSTRUCTION CLOTH TAPE AT6200

CONSTRUCTION CLOTH TAPE AT6200: the versatile cloth adhesive tape for the building industry

The AT6200 cloth tape is designed for the demands of the construction site: fixing, masking, repairing, it handles it all without flinching.
Its woven cloth backing gives it superior tear resistance compared to standard plastic tapes, with good adhesion on most construction surfaces.
It can be torn by hand, applied quickly, and stays in place even in tough working conditions.
A versatile cloth adhesive that deserves a place in every building professional's toolbox.

Introduction to the AT6200 Construction Cloth Tape

The AT6200 Construction Cloth Tape is a cloth adhesive designed specifically for building and construction applications. Robust, versatile, and reliable, it meets the requirements of professionals in the sector.

Its woven cloth backing provides excellent tear resistance. It can be torn by hand without tools, which facilitates work on site.

The adhesive is moisture-resistant, making it suitable for the difficult environments encountered in building: basements, facades, roofs, and unheated spaces.

Composition and main technical characteristics

The AT6200 consists of a polyester or woven polyethylene cloth backing, coated with a high-performance synthetic rubber adhesive. This combination ensures immediate and lasting adhesion to most construction site surfaces.

• Backing: resistant woven cloth, hand-tearable
• Adhesive: synthetic rubber, high initial tack
• Moisture resistance: yes, suitable for damp environments
• Application temperatures: wide range, compatible with all-season construction sites
• Compatible surfaces: concrete, wood, metal, plastic, cardboard
• Tearability: by hand, without tools

This tape is particularly used for masking, temporary holding, joint reinforcement, and surface protection during work. It has established itself as an everyday tool on construction and renovation sites.

Applications and uses of the AT6200 Cloth Tape in the building industry

The AT6200 Construction Cloth Tape is designed to meet the demands of the job site. Versatile, it adapts to a wide range of building tasks, from structural work to finishing.

Its woven cloth backing provides excellent tear resistance. It tears by hand, without tools, which speeds up work in the field.

Here are the most common uses for the AT6200 on site:

• Fixing and temporary holding of materials (insulation, vapor barriers, tarps)
• Jointing of protective sheets or plastic films
• Reinforcement of weakened areas on flexible substrates
• Temporary marking and signaling on site
• Emergency repairs on conduits, ducts, or equipment

It adheres to numerous surfaces: concrete, wood, metal, rigid plastic. Even in difficult conditions, it remains in place.

Product	Backing	Tear resistance	Main use	Conditions of use
AT6200 Cloth Tape	Multi-surface	High	Building, versatile construction	Indoor / outdoor
Standard cloth tape (AT7 type)	Multi-surface	Medium	Packaging, general use	Indoor
Aluminum tape (AT8 type)	Metal, duct	Low	Thermal insulation, HVAC	Indoor, high temperature
PVC marking tape	Floor, smooth surface	Low	Signaling, floor marking	Indoor

At Dagobert Industrie, we recommend the AT6200 for all building professionals looking for a reliable tape, without compromising on strength.

Technical performance: adhesion, resistance, and durability

The AT6200 construction cloth tape is based on a woven polyester fabric backing that is solid and tear-resistant. This backing gives the tape good mechanical strength, even under stress.

The natural rubber adhesive ensures a quick grab on most common building surfaces: concrete, plaster, wood, metal, or plastic. No primer needed under standard application conditions.

The tape can withstand temperatures up to approximately 60°C in continuous use. This is sufficient for indoor applications and sites in normal conditions, but it is not designed for prolonged high-temperature thermal exposure.

Its cloth surface allows for clean and straight hand tearing, without tools or scissors. On site, this is a concrete time saver.

Key performance points:

• Initial adhesion: high, sticks quickly without excessive pressure
• Tensile strength: good, thanks to the polyester fabric backing
• Moisture resistance: moderate, suitable for temporary protection, not for prolonged exposure to water
• Hand tearing: clean and easy in both directions
• Adhesive residue: low on smooth surfaces if the tape is removed within the recommended timeframes

For very damp environments or permanent outdoor applications, a bitumenized cloth tape or an aluminum tape would be more suitable. The AT6200 is optimized for versatile indoor construction site uses.

Comparison: AT6200 vs. other cloth tapes in the AT range

The AT range includes several cloth tapes designed for the building industry. Each reference has its own specificities: backing, adhesive, resistance, target use. Here is how the AT6200 is positioned.

Comparative table of AT cloth tapes

Reference	Backing	Adhesive	Tensile strength	Main use
AT6200	Woven polyester cloth	Natural rubber	High	Fixing, masking, versatile site repair
AT5000	Non-woven PE cloth	Synthetic rubber	Medium	Light masking, temporary protection
AT7000	Reinforced polyester cloth	Acrylic	Very high	Structural applications, long-term hold
AT4100	Cotton cloth	Natural rubber	Medium	Jointing, interior finishing

The AT6200 occupies a central position in the range: more robust than the AT5000, more flexible and maneuverable than the AT7000.

Its natural rubber adhesive ensures good immediate adhesion on most site surfaces: concrete, wood, metal, PVC.

It is the logical choice for everyday, versatile use on a construction or renovation site, without having to juggle between several references.

Tips for use and best practices for the AT6200 Construction Cloth Tape

The AT6200 Construction Cloth Tape gives the best results when the surface is clean, dry, and free of dust or grease.

Before application, wipe the surface with a dry cloth. On porous surfaces like concrete or plaster, a quick wipe is enough to remove residues that prevent the adhesive from gripping.

Press firmly along the entire length after application. Use the palm of your hand or a squeegee to push out air bubbles and ensure total contact with the surface.

The AT6200 is designed for both indoor and outdoor applications. However, avoid prolonged UV exposure without additional protection, which could weaken the adhesive in the long term.

For temporary assemblies or site protection, it removes cleanly without leaving residue if peeled off within a reasonable timeframe. Pull at a 45° angle for a clean removal.

Some common site uses:

• Fixing and joining protective tarps
• Temporary repair of ducts and conduits
• Holding cables and pipes during work
• Reinforcing heavy cardboard and packaging
• Signaling and temporary marking

Store the roll away from heat and humidity, flat or standing on its edge. Proper storage preserves the adhesive properties of the tape until it is used.

FAQ - AT6200 Construction Cloth Tape

1. What is the AT6200 Construction Cloth Tape used for?

The AT6200 Construction Cloth Tape is a versatile adhesive tape designed for building work. It is used to mask, fix, repair, protect, and assemble on construction sites.

It is suitable for common surfaces: wood, metal, plastic, concrete, cardboard.

2. Is the AT6200 moisture resistant?

Yes. The coated cloth that makes up this tape gives it good resistance to ambient humidity, typical of construction site environments.

However, it is not designed for prolonged immersion or long-term outdoor exposure.

3. Can the AT6200 be torn by hand?

Yes, that is one of its strengths. The cloth backing allows for a clean tear by hand, without tools or a utility knife. Practical on site for working quickly.

4. Does the tape leave marks when removed?

The AT6200 is formulated to offer a good balance between adhesion and clean removal on most smooth surfaces. On sensitive surfaces or after prolonged application, a preliminary test is recommended.

5. Can the AT6200 be used outdoors?

It can be used occasionally outdoors, but it remains primarily an indoor construction tape. For prolonged UV exposure or weather, tapes specifically formulated for outdoor use will be more suitable.

6. What is the difference between the AT6200 and a simple masking tape?

Masking tape is based on a paper backing, which is fragile and has low tensile strength. The AT6200 cloth tape is much stronger, hand-tearable, and abrasion-resistant.

It is built for intensive building applications, where paper would fail.