{"title":"Power Tools","description":"\u003cp\u003e\u003cstrong\u003ePower tools for sanding, grinding and polishing\u003c\/strong\u003e are the machines that plug in or run on batteries, as opposed to pneumatic tools. The catalogue has 24 of them, from finish sanding to heavy grinding.\u003c\/p\u003e\n\n\u003ch2\u003eFamilies in the catalogue\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eOrbital sanders\u003c\/strong\u003e: Mirka DEROS II range, Dynabrade NITRO. See our \u003ca href=\"\/en\/collections\/electric-orbital-sander\"\u003eelectric orbital sanders\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBelt sanders\u003c\/strong\u003e: FEIN GRIT GKS 75 and GILS.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eGrinders\u003c\/strong\u003e: FEIN CCG 18-125-12 AS angle grinder, AGSZ 18-280 LBL AS straight grinder, Dynabrade electric. See our \u003ca href=\"\/en\/collections\/electric-grinder\"\u003eelectric grinders\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePolishers\u003c\/strong\u003e: Dynabrade NITRO RB4, DB8E, ROB2, FLEX PXE 80. See our \u003ca href=\"\/en\/collections\/electric-polisher\"\u003eelectric polishers\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDrilling and screwdriving\u003c\/strong\u003e: FEIN ASCM 18-4 QM AS and ASCM 18 QMP AS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eElectric or pneumatic, the real trade-off\u003c\/h2\u003e\n\u003cp\u003eElectric delivers constant torque without depending on an air network, and plugs in anywhere. It needs no sized compressor, dryer or drain.\u003c\/p\u003e\n\u003cp\u003ePneumatic remains lighter for the same power and does not overheat in continuous use. At a workstation held by hand all day, this is measured in fatigue.\u003c\/p\u003e\n\u003cp\u003eThe deciding criterion is often infrastructure: a workshop without a correctly sized air network will run its pneumatic tools below their performance, with no breakdown and no visible sign.\u003c\/p\u003e\n\n\u003ch2\u003eCordless: the trap of stated run time\u003c\/h2\u003e\n\u003cp\u003eThe run time of a cordless machine is measured at reduced speed and without load. Under real pressure it often falls by half.\u003c\/p\u003e\n\u003cp\u003eThe right criterion is not the stated run time but the number of batteries available, the charging time and above all \u003cstrong\u003eplatform compatibility\u003c\/strong\u003e. Multiplying brands means multiplying chargers and tying up capital in batteries that only serve one machine.\u003c\/p\u003e\n\n\u003ch2\u003eVariable speed is not a comfort extra\u003c\/h2\u003e\n\u003cp\u003eEach abrasive has an optimum speed range, expressed at the periphery. Too slow it rubs, too fast it heats and wears. As this speed depends on the diameter of the tool fitted, a fixed-speed machine can only be right for one diameter.\u003c\/p\u003e\n\u003cp\u003eOn aluminium and plastics, which load and melt at high speed, being able to slow down changes the result more than any change of abrasive.\u003c\/p\u003e","products":[{"product_id":"meuleuse-electrique-3m","title":"3M™ Electric Grinder","description":"\u003ch2\u003e3M™ Electric Grinder: performance and precision for your industrial projects\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003e3M™ electric grinder\u003c\/strong\u003e is designed for professionals who do not compromise on quality.\u003cbr\u003e\n\u003cbr\u003e\nPower, \u003cstrong\u003ecutting precision\u003c\/strong\u003e, and endurance: it delivers on its promises in the most demanding work environments.\u003cbr\u003e\n\u003cbr\u003e\nCompatible with \u003cstrong\u003e3M™ abrasive discs\u003c\/strong\u003e, it fully leverages the manufacturer's technology for \u003cstrong\u003eflawless finishes\u003c\/strong\u003e on metal, stainless steel, or composites.\u003cbr\u003e\n\u003cbr\u003e\nAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, you gain access to the official 3M™ range with the guarantee of an \u003cstrong\u003eauthorized distributor\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eIntroducing the 3M™ electric grinder: a design conceived for industry\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ electric grinder\u003c\/strong\u003e is built to meet the requirements of the most strenuous industrial environments. Grinding, sanding, deburring, finishing: it covers a wide spectrum of applications.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this machine to professionals who cannot afford to waste time on the job site or in the workshop. Reliability and consistency are our key priorities.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eTechnology and motorization: what sets 3M™ grinders apart\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e3M™ integrates \u003cstrong\u003ehigh-power density motors\u003c\/strong\u003e into its electric grinders, designed to maintain a constant speed even under load. The result: a clean cut, without stalling.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eelectronic speed control\u003c\/strong\u003e system automatically adjusts torque based on material resistance. Whether steel, stainless steel, aluminum, or composite, the grinder adjusts itself without operator intervention.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe mechanical design prioritizes \u003cstrong\u003ebearing durability\u003c\/strong\u003e and heat dissipation. Less overheating, less premature wear, fewer unplanned downtimes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eHigh no-load speed\u003c\/strong\u003e for rapid acceleration\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eRestart protection\u003c\/strong\u003e for operator safety\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eErgonomic body\u003c\/strong\u003e to reduce fatigue during long sessions\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eOptimized 3M™ disc compatibility\u003c\/strong\u003e to exploit the tool's full potential\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003e3M™ Electric Grinder\u003c\/th\u003e\n\n      \u003cth\u003eBosch GWS 22-230 Grinder\u003c\/th\u003e\n\n      \u003cth\u003eMetabo WEV 15-125 Grinder\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eElectronic regulation\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMotor power\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eOptimized for intensive use\u003c\/td\u003e\n\n      \u003ctd\u003e2,200 W\u003c\/td\u003e\n\n      \u003ctd\u003e1,550 W\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003ePrimary use\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eIndustrial grinding \/ finishing\u003c\/td\u003e\n\n      \u003ctd\u003eHeavy-duty grinding\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding \/ sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eAbrasive compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eOptimized 3M™ discs\u003c\/td\u003e\n\n      \u003ctd\u003eStandard discs\u003c\/td\u003e\n\n      \u003ctd\u003eStandard discs\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eRestart protection\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eKey technical specifications of 3M™ electric grinders\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003ePower, speed, and ergonomics: data you need to know\u003c\/h3\u003e\n\n\u003cp\u003e3M™ electric grinders are built for demanding industrial environments. They combine \u003cstrong\u003ehigh motor power\u003c\/strong\u003e, controlled no-load speed, and an ergonomic design meant for prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003ePower typically ranges between 750 W and 2,400 W\u003c\/strong\u003e depending on the model. This covers everything from light finishing work to aggressive grinding on steel or stainless steel.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eNo-load speed\u003c\/strong\u003e oscillates between 6,000 and 11,000 rpm. Some models integrate an \u003cstrong\u003eelectronic variable speed trigger\u003c\/strong\u003e to adapt the pace to the material being worked.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegarding ergonomics, 3M™ pays close attention to handling. Anti-vibration handles and the \u003cstrong\u003eadjustable guard\u003c\/strong\u003e reduce operator fatigue during long sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDisc diameter\u003c\/strong\u003e: 115 mm, 125 mm, or 230 mm depending on the model\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMounting\u003c\/strong\u003e: standard M14 threaded spindle\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eProtection\u003c\/strong\u003e: anti-restart, overload protection\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eProtection class\u003c\/strong\u003e: double insulation (Class II) on most models\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003e3M™ Electric Grinder\u003c\/th\u003e\n\n      \u003cth\u003eBosch GWS 18-125\u003c\/th\u003e\n\n      \u003cth\u003eMetabo WB 18 LTX BL\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e750-2,400 W\u003c\/td\u003e\n\n      \u003ctd\u003e1,800 W\u003c\/td\u003e\n\n      \u003ctd\u003e1,850 W\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eNo-load speed\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e6,000-11,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e8,500 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e9,600 rpm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDisc diameter\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e115-230 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eVariable speed\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eYes (depending on model)\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDouble insulation\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003e3M™ electric grinder vs. other brands: comparison table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003eComparison: 3M™, Bosch Professional, DEWALT, and Ryobi\u003c\/h3\u003e\n\n\u003cp\u003eChoosing an electric grinder primarily means choosing a \u003cstrong\u003ebalance between power, durability, and precision\u003c\/strong\u003e. Here is how the \u003cstrong\u003e3M™ electric grinder\u003c\/strong\u003e positions itself against other market benchmarks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eCriteria\u003c\/th\u003e\n\n      \u003cth\u003e\u003cstrong\u003e3M™\u003c\/strong\u003e\u003c\/th\u003e\n\n      \u003cth\u003eBosch Professional\u003c\/th\u003e\n\n      \u003cth\u003eDEWALT\u003c\/th\u003e\n\n      \u003cth\u003eRyobi\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eTarget use\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive industrial\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile professional\u003c\/td\u003e\n\n      \u003ctd\u003eProfessional site work\u003c\/td\u003e\n\n      \u003ctd\u003eSemi-professional \/ DIY\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMotor power\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eHigh (continuous use)\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eMedium\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eAbrasive compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eOptimized with 3M™ abrasives\u003c\/td\u003e\n\n      \u003ctd\u003eStandard\u003c\/td\u003e\n\n      \u003ctd\u003eStandard\u003c\/td\u003e\n\n      \u003ctd\u003eStandard\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eVibration control\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eExcellent\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eVery good\u003c\/td\u003e\n\n      \u003ctd\u003eGood\u003c\/td\u003e\n\n      \u003ctd\u003eAverage\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFinishing precision\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eVery high\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eFair\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDurability in industrial settings\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eVery high\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eLimited\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eErgonomics\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eOptimized for long use\u003c\/td\u003e\n\n      \u003ctd\u003eVery good\u003c\/td\u003e\n\n      \u003ctd\u003eGood\u003c\/td\u003e\n\n      \u003ctd\u003eFair\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ grinder\u003c\/strong\u003e stands out for its \u003cstrong\u003esystem integration\u003c\/strong\u003e: it is designed to work in synergy with 3M™ discs and abrasives, which maximizes grinding and finishing performance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eBosch Professional and DEWALT remain solid alternatives for standard construction site use. Ryobi is better suited for occasional or light-duty use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor demanding industrial applications, \u003cstrong\u003egrinding steel, stainless steel, aluminum, or surface finishing\u003c\/strong\u003e, the 3M™ offers a level of consistency and control that is difficult to match. This is why, at \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend it as a priority for intensive production environments.\u003c\/p\u003e\u003ch2\u003eApplications and materials compatible with 3M™ electric grinders\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003e3M™ electric grinders\u003c\/strong\u003e are adaptable to a wide range of industrial tasks, from coarse grinding to surface finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThey are designed to work on both \u003cstrong\u003eferrous metals\u003c\/strong\u003e (steel, stainless steel, cast iron) and non-ferrous materials such as aluminum or copper.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompatible 3M™ abrasives allow for work on flat, curved, or complex surfaces with \u003cstrong\u003econstant precision\u003c\/strong\u003e throughout the operation.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eTypical uses in workshops and on-site\u003c\/h3\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eGrinding and deburring\u003c\/strong\u003e of metal parts after welding\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSurface rectification\u003c\/strong\u003e on steel and stainless steel\u003c\/li\u003e\n\n  \u003cli\u003eSanding and \u003cstrong\u003efinishing\u003c\/strong\u003e on aluminum and non-ferrous metals\u003c\/li\u003e\n\n  \u003cli\u003eLight cutting of metal profiles\u003c\/li\u003e\n\n  \u003cli\u003eCleaning and \u003cstrong\u003estripping\u003c\/strong\u003e of oxidized or painted surfaces\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer these grinders for demanding environments: industrial maintenance, boilermaking, metalworking, or metal construction.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eMaterial\u003c\/th\u003e\n\n      \u003cth\u003e3M™ Grinder\u003c\/th\u003e\n\n      \u003cth\u003eBosch GWS Grinder\u003c\/th\u003e\n\n      \u003cth\u003eMetabo WEV Grinder\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eSteel \/ Stainless steel\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Excellent\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Very good\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Very good\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Very good\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Good\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Good\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eCast iron\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Very good\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Good\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Very good\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePrecision finishing\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Excellent\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Good\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Very good\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eStone \/ Concrete\u003c\/td\u003e\n\n      \u003ctd\u003e✘ Not recommended\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Good\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Good\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eSafety and recommended accessories for using a 3M™ electric grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eA \u003cstrong\u003e3M™ electric grinder\u003c\/strong\u003e delivers high performance. This implies following strict safety rules with every use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWearing \u003cstrong\u003epersonal protective equipment\u003c\/strong\u003e is essential. Safety goggles, cut-resistant gloves, and hearing protection are the three non-negotiable minimums.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eSystematically check the condition of the \u003cstrong\u003edisc or abrasive grain\u003c\/strong\u003e before starting. A damaged accessory can shatter at high speed and cause serious injuries.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the \u003cstrong\u003eessential accessories\u003c\/strong\u003e to pair with your 3M™ grinder:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003e3M™ Cubitron™ II abrasive discs\u003c\/strong\u003e, for cutting and grinding steel, stainless steel, aluminum\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003e3M™ flap discs\u003c\/strong\u003e, for finishing and deburring\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSuitable wheel guard\u003c\/strong\u003e, kept in the correct position for every operation\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSafety goggles\u003c\/strong\u003e, protection against flying particles\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAnti-vibration gloves\u003c\/strong\u003e, for prolonged work sessions\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eLeather apron\u003c\/strong\u003e, body protection against sparks\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eEnsure that the \u003cstrong\u003emaximum speed of the accessory\u003c\/strong\u003e is always greater than or equal to that of the grinder. This is a fundamental safety rule.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend working exclusively with \u003cstrong\u003ecertified and 3M™ compatible\u003c\/strong\u003e accessories. This guarantees both operator safety and tool longevity.\u003c\/p\u003e\u003ch2\u003eFAQ - 3M™ Electric Grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between a 3M™ electric grinder and a 3M™ pneumatic grinder?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e3M™ electric grinder\u003c\/strong\u003e runs on mains power or battery. It is self-contained: no air compressor is needed.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003epneumatic\u003c\/strong\u003e version is lighter and often faster in rotational speed, but it requires a compressed air installation. In an equipped workshop, both are excellent. On a job site without an air network, the electric version is the clear choice.\u003c\/p\u003e\u003cbr\u003e\n\n\u003ch3\u003e2. Which discs and accessories are compatible with 3M™ electric grinders?\u003c\/h3\u003e\n\u003cp\u003e3M™ electric grinders accept \u003cstrong\u003ecutting, flap, and grinding discs\u003c\/strong\u003e in standard formats (115 mm, 125 mm, 230 mm depending on the model).\u003c\/p\u003e\n\u003cp\u003e3M offers its \u003cstrong\u003eCubitron™ II\u003c\/strong\u003e range: discs with triangular-shaped grain that cut faster and last longer than traditional abrasives. They are directly compatible with 3M™ electric grinders.\u003c\/p\u003e\n\u003cp\u003eThird-party accessories that meet EN 13743 standards and have the correct spindle diameter can also be used.\u003c\/p\u003e\u003cbr\u003e\n\n\u003ch3\u003e3. Is the 3M™ electric grinder suitable for intensive professional use?\u003c\/h3\u003e\n\u003cp\u003eYes. 3M™ electric grinders are designed for long work cycles in industrial environments: \u003cstrong\u003eboilermaking, welding, metallurgy, shipbuilding\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eTheir motor is sized to handle repeated loads without premature overheating. At \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend them for high-production workshops.\u003c\/p\u003e\u003cbr\u003e\n\n\u003ch3\u003e4. How to maintain and extend the life of a 3M™ electric grinder?\u003c\/h3\u003e\n\u003cp\u003eRegularly dust the \u003cstrong\u003eventilation grilles\u003c\/strong\u003e with compressed air. Metal residue obstructs the motor and accelerates wear.\u003c\/p\u003e\n\u003cp\u003eCheck the condition of the \u003cstrong\u003emotor brushes\u003c\/strong\u003e every 6 months during intensive use and replace them before they are worn out. Also, check the tightness of the disc flange before each use.\u003c\/p\u003e\n\u003cp\u003eStore the tool in a dry place, away from impacts. Simple but regular maintenance easily doubles the machine's lifespan.\u003c\/p\u003e\u003cbr\u003e\n\n\u003ch3\u003e5. Which safety standards do 3M™ electric grinders comply with?\u003c\/h3\u003e\n\u003cp\u003e3M™ electric grinders comply with the \u003cstrong\u003eMachinery Directive 2006\/42\/EC\u003c\/strong\u003e and carry the \u003cstrong\u003eCE\u003c\/strong\u003e marking. They meet EN 60745 (safety of handheld power tools) and EN 13743 standards for abrasive compatibility.\u003c\/p\u003e\n\u003cp\u003eThe safety guard, \u003cstrong\u003esoft start\u003c\/strong\u003e, and quick-stop brake (depending on the model) are standard features that limit risks in the event of disc breakage or accidental drops.\u003c\/p\u003e","brand":"3M™","offers":[{"title":"125 \/ 3M_7100249668","offer_id":58488300929407,"sku":"3M_7100249668","price":347.35,"currency_code":"EUR","in_stock":true},{"title":"115 \/ 3M_7100249667","offer_id":58488300962175,"sku":"3M_7100249667","price":270.38,"currency_code":"EUR","in_stock":true},{"title":"125 \/ 3M_7100249665","offer_id":58488300994943,"sku":"3M_7100249665","price":333.47,"currency_code":"EUR","in_stock":true},{"title":"115 \/ 3M_7100249666","offer_id":58488301027711,"sku":"3M_7100249666","price":259.56,"currency_code":"EUR","in_stock":true},{"title":"125 \/ 3M_7100332772","offer_id":59084289048959,"sku":"3M_7100332772","price":420.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-electrique-3m.jpg?v=1789990246"},{"product_id":"polisseuse-rotative-dynabrader-nitro-51592","title":"Dynabrade® NITRO 51592 Rotary Polisher","description":"\u003ch2\u003eDynabrade® NITRO 51592 Rotary Polisher, High-Performance Professional Finishing\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO 51592\u003c\/strong\u003e is a \u003cstrong\u003epneumatic rotary polisher\u003c\/strong\u003e built for professionals who make no compromises on finish.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eIts compressed air motor delivers constant power, ideal for \u003cstrong\u003eautomotive polishing\u003c\/strong\u003e, \u003cstrong\u003epaint correction\u003c\/strong\u003e, and achieving high gloss on metal or composite surfaces.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eLightweight, balanced, and robust, it is the tool of choice on production lines as well as in \u003cstrong\u003ehigh-performance finishing\u003c\/strong\u003e workshops.\u003c\/p\u003e\u003ch2\u003eOverview of the Dynabrade® NITRO 51592 Rotary Polisher\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO 51592 Rotary Polisher\u003c\/strong\u003e is a power tool designed for professionals who demand a flawless finish. Auto body repairers, detailers, and surface technicians find it to be a reliable, powerful, and precise machine.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this polisher as a benchmark solution for \u003cstrong\u003ehigh-performance rotary polishing\u003c\/strong\u003e. It is intended for demanding applications where speed consistency and heat control are critical.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDynabrade® and the NITRO Series™ range: a standard in power polishing\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eDynabrade®\u003c\/strong\u003e is an American manufacturer recognized for over 60 years in abrasive and finishing tools. The \u003cstrong\u003eNITRO Series™\u003c\/strong\u003e range represents their power line dedicated to professional polishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe NITRO Series™ stands out for its \u003cstrong\u003ebrushless electric motor\u003c\/strong\u003e, which ensures constant torque regardless of the load. Result: less operator fatigue, more consistency on the treated surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e51592\u003c\/strong\u003e is the rotary model in the range. Unlike an orbital or dual-action (DA) polisher, the pure rotary motion offers \u003cstrong\u003ehigh correction capability\u003c\/strong\u003e for deep defects: scratches, heavy oxidation, and sanding marks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl--\u003cul\u003e\n  \u003cli\u003e\n\n\u003cstrong\u003eRotary motion\u003c\/strong\u003e: aggressive correction, ideal before finishing\u003c\/li\u003e\n  \u003cli\u003e\n\n\u003cstrong\u003eVariable speed\u003c\/strong\u003e: adaptation to each stage of the work\u003c\/li\u003e\n  \u003cli\u003e\n\n\u003cstrong\u003eErgonomic design\u003c\/strong\u003e: stable grip for long sessions\u003c\/li\u003e\n  \u003cli\u003e\n\n\u003cstrong\u003eBacking plate compatibility\u003c\/strong\u003e: standard 5\" \/ 125 mm\u003c\/li\u003e\n\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eManufacturer\u003c\/th\u003e\n\n      \u003cth\u003eMotion Type\u003c\/th\u003e\n\n      \u003cth\u003eMain Usage\u003c\/th\u003e\n\n      \u003cth\u003eCorrection Level\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eNITRO 51592\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003eRotary\u003c\/td\u003e\n\n      \u003ctd\u003eCorrection + polishing\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eNITRO 51594\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003eDual action (DA)\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, buffing\u003c\/td\u003e\n\n      \u003ctd\u003eModerate\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eLHR21 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003eRupes\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n      \u003ctd\u003eSoft finishing\u003c\/td\u003e\n\n      \u003ctd\u003eLow to moderate\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGEX 125-150 AVE\u003c\/td\u003e\n\n      \u003ctd\u003eBosch\u003c\/td\u003e\n\n      \u003ctd\u003eEccentric\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral polishing\u003c\/td\u003e\n\n      \u003ctd\u003eLow to moderate\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eTechnical features and specifications of the Dynabrade® NITRO 51592\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO 51592\u003c\/strong\u003e is a \u003cstrong\u003epneumatic rotary polisher\u003c\/strong\u003e designed for professional finishing on car bodies, paint, and composite surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt runs at \u003cstrong\u003e600 RPM\u003c\/strong\u003e at free speed, positioning it in the ideal range for \u003cstrong\u003eburn-free polishing\u003c\/strong\u003e on clears and lacquers. The compressed air motor delivers stable power without prolonged overheating.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe plate accepts a \u003cstrong\u003e150 mm (6 inch) disc\u003c\/strong\u003e, a standard format compatible with the majority of \u003cstrong\u003epolishing foams and abrasive discs\u003c\/strong\u003e on the market.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the key specifications:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003ePlate diameter: \u003cstrong\u003e150 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eFree speed: \u003cstrong\u003e600 RPM\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: \u003cstrong\u003ecompressed air\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eRecommended operating pressure: \u003cstrong\u003e6.2 bar (90 psi)\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eAir consumption: approximately \u003cstrong\u003e283 L\/min\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWeight: \u003cstrong\u003e1.5 kg\u003c\/strong\u003e (lightweight for prolonged use)\u003c\/li\u003e\n\n  \u003cli\u003ePlate attachment: \u003cstrong\u003e5\/16\", 24 thread\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO\u003c\/strong\u003e body incorporates an anti-vibration system that reduces fatigue during long jobs. The grip remains stable even under load.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003eFree Speed\u003c\/th\u003e\n\n      \u003cth\u003ePlate\u003c\/th\u003e\n\n      \u003cth\u003eMain Usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade® NITRO 51592\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic rotary\u003c\/td\u003e\n\n      \u003ctd\u003e600 RPM\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing polish, clear coats\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade® 51455\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic rotary\u003c\/td\u003e\n\n      \u003ctd\u003e1,500 RPM\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eSanding removal, paint correction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003eElectric rotary\u003c\/td\u003e\n\n      \u003ctd\u003e300-1,000 RPM\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eMulti-stage polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFlex PE 14-2 150\u003c\/td\u003e\n\n      \u003ctd\u003eElectric rotary\u003c\/td\u003e\n\n      \u003ctd\u003e600-2,100 RPM\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eCorrection and body finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its \u003cstrong\u003elow speed and pneumatic power supply\u003c\/strong\u003e, the NITRO 51592 stands out from electric models by heating up more slowly, a concrete advantage on \u003cstrong\u003esensitive clear coats\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eComparison: Dynabrade® NITRO 51592 vs other electric rotary polishers\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eComparison table: 51592 vs RB4 vs ROB2\u003c\/h3\u003e\n\n\u003cp\u003eThe market for professional electric rotary polishers is dominated by a few solid benchmarks. Here is how the \u003cstrong\u003eDynabrade® NITRO 51592\u003c\/strong\u003e positions itself against the Rupes LHR21 Mark III (the \"RB4\") and the Flex ROB2.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003eDynabrade® NITRO 51592\u003c\/th\u003e\n\n      \u003cth\u003eRupes LHR21 Mark III\u003c\/th\u003e\n\n      \u003cth\u003eFlex ROB2\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMotion type\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eRotary\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n      \u003ctd\u003eRotary\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMotor power\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e1,200 W\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e500 W\u003c\/td\u003e\n\n      \u003ctd\u003e1,050 W\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eSpeed (RPM)\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e400-3,000\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e1,700-4,200\u003c\/td\u003e\n\n      \u003ctd\u003e600-3,000\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePlate diameter\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e150 mm\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eWeight\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e2.3 kg\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e2.6 kg\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMain usage\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eCorrection + high-performance finishing\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eSoft finishing, light bodywork\u003c\/td\u003e\n\n      \u003ctd\u003eAggressive correction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eElectronic speed control\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eYes\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eUser profile\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDemanding professional\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eSemi-pro \/ body shop\u003c\/td\u003e\n\n      \u003ctd\u003eProfessional\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO 51592 stands out for its superior motor power\u003c\/strong\u003e: 1,200 W compared to 500 W for the Rupes. It handles \u003cstrong\u003edeep defects and hard paints\u003c\/strong\u003e much more effectively.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the Flex ROB2, the Dynabrade wins on \u003cstrong\u003eweight and low-speed range\u003c\/strong\u003e. Dropping to 400 RPM allows for precise work on delicate areas without burning the paint.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe Rupes remains relevant for soft finishing in semi-pro use. But when it comes to \u003cstrong\u003eintensive correction, industrial bodywork, or large surfaces\u003c\/strong\u003e, the NITRO 51592 clearly takes the lead.\u003c\/p\u003e\u003ch2\u003eApplications and areas of use for the Dynabrade® NITRO 51592\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO 51592\u003c\/strong\u003e is a pneumatic rotary polisher designed for demanding professionals. It adapts to a wide spectrum of \u003cstrong\u003esurface finishing\u003c\/strong\u003e applications.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts high torque and controlled speed make it a tool of choice for \u003cstrong\u003emulti-step polishing\u003c\/strong\u003e, from initial sanding removal to final buffing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eMain application sectors\u003c\/h3\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAutomotive bodywork\u003c\/strong\u003e: paint correction, removal of light scratches, clear coat buffing\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAerospace industry\u003c\/strong\u003e: fuselage polishing, finishing of composite or metal parts\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eShipbuilding\u003c\/strong\u003e: hull treatment, gelcoat finishing\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eGeneral industry\u003c\/strong\u003e: polishing stainless steel, aluminum, technical plastic parts\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eBody shops and industrial painting workshops\u003c\/strong\u003e: touch-ups and high-gloss finishes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe NITRO 51592 excels particularly on \u003cstrong\u003elarge flat surfaces\u003c\/strong\u003e where the rotary motion offers higher efficiency than a dual-action polisher.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt pairs with \u003cstrong\u003epolishing foams, wool discs\u003c\/strong\u003e, and different types of compounds depending on the hardness of the substrate and the desired level of correction.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl--\u003ctable\u003e\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003eDynabrade® NITRO 51592 (rotary)\u003c\/th\u003e\n\n      \u003cth\u003eDynabrade® dual-action (e.g., 57522)\u003c\/th\u003e\n\n      \u003cth\u003eStandard electric rotary polisher\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMotion type\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eRotary\u003c\/td\u003e\n\n      \u003ctd\u003eDual-action orbital\u003c\/td\u003e\n\n      \u003ctd\u003eRotary\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003ePaint correction\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eModerate\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eRisk of burn\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eModerate (mastery required)\u003c\/td\u003e\n\n      \u003ctd\u003eLow\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eOperator vibrations\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eLow\u003c\/td\u003e\n\n      \u003ctd\u003eVery low\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eRecommended use\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eCorrection + pro buffing\u003c\/td\u003e\n\n      \u003ctd\u003eSoft finishing, beginners\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral workshop use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\u003ch2\u003eUsage tips and best practices to optimize your finishes\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO 51592 rotary polisher\u003c\/strong\u003e delivers high performance, but a few simple habits make all the difference in the final result.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAlways start on a \u003cstrong\u003eclean and degreased surface\u003c\/strong\u003e. Any contamination (dust, silicone, oil) compromises polish adhesion and generates micro-scratches that are difficult to correct.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAdapt the \u003cstrong\u003erotation speed\u003c\/strong\u003e to the work phase. A high speed is suitable for defect removal, while a reduced speed suffices for spreading and finishing. Never remain stationary on the surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAlways pair the right pad with the right step:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFirm foam pad\u003c\/strong\u003e, correction of scratches and heavy oxidation\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSoft foam pad\u003c\/strong\u003e, intermediate polishing and refining\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMicrofiber pad\u003c\/strong\u003e, final finishing and buffing\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWork in \u003cstrong\u003ecross-hatch passes\u003c\/strong\u003e, in sections of about 50 × 50 cm. This ensures even coverage and avoids the halos typical of rotary work.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAvoid working under \u003cstrong\u003edirect light or high heat\u003c\/strong\u003e. Warm paint absorbs the product differently, and the result becomes unpredictable. Prefer a workshop with a stable temperature.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFinally, clean the pads after each section. A pad loaded with dried product \u003cstrong\u003escratches instead of polishing\u003c\/strong\u003e and wears the surface unnecessarily.\u003c\/p\u003e\u003ch2\u003eFAQ - Dynabrade® NITRO 51592 Rotary Polisher\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between a rotary polisher and an orbital polisher?\u003c\/h3\u003e\n\u003cp\u003eThe rotary polisher rotates on a fixed axis, which generates more heat and friction. It removes material faster and effectively tackles \u003cstrong\u003edeep scratches\u003c\/strong\u003e and heavy paint defects.\u003c\/p\u003e\n\u003cp\u003eThe orbital polisher (or DA) has an eccentric, smoother motion. It is less aggressive and is better suited for light finishes or less experienced users.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO 51592\u003c\/strong\u003e is a rotary: it is built for professionals who want raw performance and a quick result.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What type of backing plate and pad should I use with the 51592?\u003c\/h3\u003e\n\u003cp\u003eThe 51592 accepts a \u003cstrong\u003e150 mm plate\u003c\/strong\u003e. For paint correction, a firm backing pad is recommended. For finishing, switch to a softer pad to limit micro-scratches.\u003c\/p\u003e\n\u003cp\u003eDynabrade offers compatible backing plates directly suited to this machine. Always check the thread and diameter before mounting a third-party accessory.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is the NITRO 51592 suitable for all bodywork surfaces?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for \u003cstrong\u003eautomotive bodywork and painted surfaces\u003c\/strong\u003e in professional workshops. It is used on steel, aluminum, and some rigid plastics.\u003c\/p\u003e\n\u003cp\u003eOn fragile surfaces or areas with thin clear coat, you must reduce speed and work with an appropriate pad. Poor control of a rotary can burn the clear coat.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What rotation speed should I use for the Dynabrade® NITRO 51592?\u003c\/h3\u003e\n\u003cp\u003eThe 51592 offers a \u003cstrong\u003eno-load speed of 2,500 RPM\u003c\/strong\u003e. This is a typical value for a professional rotary of this segment, sufficient for both paint correction and high-gloss finishing.\u003c\/p\u003e\n\u003cp\u003eSpeed is adjusted via the integrated control dial. For correction, run at a high speed. For finishing, lower the speed to avoid excessive heat buildup.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Why choose the Dynabrade NITRO range over another brand?\u003c\/h3\u003e\n\u003cp\u003eDynabrade is an American manufacturer recognized in the industry for the \u003cstrong\u003erobustness and precision of its pneumatic and electric tools\u003c\/strong\u003e. The NITRO range is designed for intensive workshop use.\u003c\/p\u003e\n\n\u003cp\u003eCompared to competing benchmarks like Rupes or Festool in this segment, the NITRO 51592 stands out for its \u003cstrong\u003ehigh motor torque\u003c\/strong\u003e and production-oriented design. It is a tool for professionals who polish multiple vehicles per day.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Does Dagobert Industrie stock accessories compatible with the 51592?\u003c\/h3\u003e\n\u003cp\u003eYes. \u003cstrong\u003eAt Dagobert Industrie\u003c\/strong\u003e, we stock Dynabrade accessories compatible with this machine: backing plates, backing pads, and polishing consumables.\u003c\/p\u003e\n\u003cp\u003eCheck our catalog or contact our technical team to identify the \u003cstrong\u003eexact part numbers suited to your application\u003c\/strong\u003e (correction, finishing, buffing).\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"200 \/ 2100 rpm","offer_id":58488306762111,"sku":"DYNA_51592","price":632.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/polisseuse-rotative-dynabradeR-nitro-51592.jpg?v=1789990274"},{"product_id":"ponceuse-orbitale-excentrique-dynabrader-nitro-nse6ve","title":"Dynabrade® NITRO NSE6VE Random Orbital Sander","description":"\u003ch2\u003eDynabrade® NITRO NSE6VE random orbital sander: performance and precision for industrial sanding\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO NSE6VE\u003c\/strong\u003e is a \u003cstrong\u003erandom orbital sander\u003c\/strong\u003e built for the demands of \u003cstrong\u003eindustrial sanding\u003c\/strong\u003e: flawless finish, reduced vibration, and ultimate durability.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts high-performance pneumatic motor and \u003cstrong\u003e6 mm random orbital motion\u003c\/strong\u003e guarantee \u003cstrong\u003euniform abrasion\u003c\/strong\u003e on all surfaces, even the most delicate.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eDesigned for professionals who do not compromise on quality, it is a benchmark tool in \u003cstrong\u003eauto body repair, aerospace, and industrial manufacturing\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eOverview of the Dynabrade® NITRO NSE6VE random orbital sander\u003c\/h2\u003e\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO NSE6VE random orbital sander\u003c\/strong\u003e is a high-end pneumatic machine designed for \u003cstrong\u003eprecision industrial sanding\u003c\/strong\u003e. It is aimed at professionals in auto body, metal fabrication, and surface finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts compressed air motor delivers a \u003cstrong\u003ehigh, consistent orbital speed\u003c\/strong\u003e, ensuring uniform material removal. The result: a perfectly prepared surface, free of streaks or marks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eDynabrade®'s \u003cstrong\u003eNITRO\u003c\/strong\u003e technology refers to a design optimized for durability and low vibration. It reduces operator fatigue during prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDetailed technical specifications\u003c\/h3\u003e\n\n\u003cp\u003eThe NSE6VE features a \u003cstrong\u003e150 mm pad\u003c\/strong\u003e with a \u003cstrong\u003e6 mm\u003c\/strong\u003e eccentric movement, ideal for flat and slightly curved surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePad diameter:\u003c\/strong\u003e 150 mm\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eEccentric:\u003c\/strong\u003e 6 mm\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFree speed:\u003c\/strong\u003e 6,000 RPM\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePower source:\u003c\/strong\u003e compressed air (pneumatic)\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eIntegrated vacuum:\u003c\/strong\u003e yes\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approximately 1.1 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eintegrated vacuum\u003c\/strong\u003e keeps the workstation clean and extends the life of the abrasives. A practical advantage in the workshop.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eEccentric\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade® NITRO NSE6VE\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, intermediate sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade® NSE3VE\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, delicate surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003eCarpentry, wood finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003eAuto body polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eNITRO technology: what distinguishes the NSE6VE from standard pneumatic sanders\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eDynabrade®'s NITRO technology\u003c\/strong\u003e is based on a pneumatic vane motor completely redesigned from the ground up. The result: a speed consistency that conventional orbital sanders struggle to achieve.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe principle is simple. The NITRO motor maintains a \u003cstrong\u003econstant speed under load\u003c\/strong\u003e, even when the pressure applied to the workpiece increases. No RPM drop, no loss of surface quality during a pass.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eStandard pneumatic sanders see their speed drop as soon as the operator presses down. This is precisely what the \u003cstrong\u003eNSE6VE corrects\u003c\/strong\u003e, with a direct impact on the consistency of the finish.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAnother notable difference: the \u003cstrong\u003ereduced noise level\u003c\/strong\u003e. The NITRO motor generates less noise than conventional vane motors, which improves comfort at intensive workstations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe design also incorporates \u003cstrong\u003eoptimized vane lubrication\u003c\/strong\u003e, which extends the motor's lifespan and reduces maintenance frequency.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003eDynabrade® NSE6VE (NITRO)\u003c\/th\u003e\n\n      \u003cth\u003eStandard pneumatic sander\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eSpeed under load\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eConstant\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDrops according to pressure\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eNoise level\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eReduced\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eStandard \/ high\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMotor lubrication\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eOptimized (increased longevity)\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eBasic lubrication\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFinish consistency\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eHigh\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eVariable\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMaintenance\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eExtended intervals\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eFrequent\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eApplications and materials suitable for the Dynabrade® NITRO NSE6VE\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO NSE6VE\u003c\/strong\u003e is designed for demanding industrial environments. Its random orbital movement guarantees \u003cstrong\u003euniform, scratch-free sanding\u003c\/strong\u003e, regardless of the substrate being worked on.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eSanding wood, metal, composite, and bodywork\u003c\/h3\u003e\n\n\u003cp\u003eThis sander covers a very wide range of applications. It is just as well-suited for \u003cstrong\u003ecarpentry shops\u003c\/strong\u003e as it is for automotive body lines or composite workshops.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the main compatible materials:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWood and wood products\u003c\/strong\u003e: finishing sanding, coarse sanding, leveling assemblies\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMetal and steel\u003c\/strong\u003e: deburring, surface preparation before painting or treatment\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eComposite and fiberglass\u003c\/strong\u003e: sanding aerospace, marine, or automotive parts\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAuto body\u003c\/strong\u003e: \u003cstrong\u003eprimer sanding\u003c\/strong\u003e, finishing before lacquering, surface retouching\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eTechnical plastics\u003c\/strong\u003e: shaping and finishing molded parts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe 150 mm pad accepts a wide range of abrasives. Common grits range from \u003cstrong\u003e80 grit for coarse sanding\u003c\/strong\u003e to 400 grit for fine finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eProduct\u003c\/th\u003e\n\n      \u003cth\u003eManufacturer\u003c\/th\u003e\n\n      \u003cth\u003ePad diameter\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eNITRO NSE6VE\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eIndustrial finishing, bodywork, composite\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eETSC 125\/5\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eCarpentry, cabinetmaking\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGEX 150 AC\u003c\/td\u003e\n\n      \u003ctd\u003eBosch Professional\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood, metal, general use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood and bodywork finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the NITRO NSE6VE for workshops that handle \u003cstrong\u003emixed surfaces\u003c\/strong\u003e and require a machine that is robust, versatile, and reliable on a daily basis.\u003c\/p\u003e\u003ch2\u003eComparison: Dynabrade® NITRO NSE6VE vs. other random orbital sanders on the market\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO NSE6VE\u003c\/strong\u003e is positioned in the high-performance category of pneumatic random orbital sanders. Compared to its direct competitors, it stands out on several key points.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eoil-free NITRO motor\u003c\/strong\u003e is a strong selling point: no manual lubrication, reduced maintenance, extended service life. Models like the \u003cstrong\u003eFestool ETS EC 150\u003c\/strong\u003e (electric) or the \u003cstrong\u003eRupes LHR 15 Mark III\u003c\/strong\u003e require different energy or maintenance management.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e150 mm pad with 6 mm orbit\u003c\/strong\u003e offers a balance between aggression and finishing. 3 mm orbit models (like the Mirka DEROS 550CV) prioritize ultra-fine finishing, while a 21 mm orbit (Rupes BigFoot) targets rapid sanding.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eMotorization\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade® NITRO NSE6VE\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eOil-free pneumatic\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile industrial sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS 550CV\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eAuto body sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood and lacquer finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade® 57522\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eStandard workshop sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn an intensive industrial environment, \u003cstrong\u003epneumatic motorization\u003c\/strong\u003e remains superior: no electrical risk, constant power, lightweight. The NSE6VE also includes \u003cstrong\u003evariable speed\u003c\/strong\u003e, which few pneumatic sanders offer at this level.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the NITRO NSE6VE for workshops looking for a tool that is \u003cstrong\u003erobust, versatile, and low-maintenance\u003c\/strong\u003e, capable of covering both intermediate sanding and surface finishing.\u003c\/p\u003e\u003ch2\u003eCompatible accessories and recommended consumables for the NSE6VE\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO NSE6VE\u003c\/strong\u003e is designed to accept \u003cstrong\u003e150 mm diameter\u003c\/strong\u003e abrasives, attached via a Velcro® system. This size is one of the most widely used in the industry, which ensures broad availability of consumables.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eTo get the best out of this sander, the choice of abrasive is crucial. \u003cstrong\u003eVelcro®-backed abrasive discs Ø 150 mm\u003c\/strong\u003e with 6 or 8 holes are directly compatible. The holes must align with the machine's \u003cstrong\u003evacuum plate\u003c\/strong\u003e to ensure efficient dust extraction.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the essential consumables and accessories to prepare:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAbrasive discs Ø 150 mm\u003c\/strong\u003e, grits P80 to P400 depending on the sanding stage (coarse, finishing, polishing)\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eReplacement pads\u003c\/strong\u003e, replace as soon as the foam shows signs of wear to maintain flatness\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFoam interfaces\u003c\/strong\u003e, 5 or 10 mm thickness to adapt to slightly curved profiles\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eVacuum connector\u003c\/strong\u003e compatible with class L\/M industrial vacuums\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePneumatic oil\u003c\/strong\u003e, a few drops before each long session extend the motor's life\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eMirka Abranet®\u003c\/strong\u003e or \u003cstrong\u003e3M Hookit™\u003c\/strong\u003e Ø 150 mm abrasives are perfectly suited to this machine. They offer \u003cstrong\u003eoptimal dust extraction\u003c\/strong\u003e thanks to their mesh or perforated structure, which prolongs the life of the grit.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer all these consumables to equip your NSE6VE in a coherent and efficient manner.\u003c\/p\u003e\u003ch2\u003eFAQ - Dynabrade® NITRO NSE6VE random orbital sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between a random orbital sander and a classic orbital sander?\u003c\/h3\u003e\n\u003cp\u003eThe random orbital sander combines two movements: rotation and offset oscillation. The result: \u003cstrong\u003eno circular scratches\u003c\/strong\u003e, a much more uniform surface than with a simple orbital.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO NSE6VE\u003c\/strong\u003e fully exploits this principle for demanding industrial finishes, where a classic orbital would leave visible marks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What types of work is the NSE6VE suitable for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for \u003cstrong\u003efinish sanding on bodywork, metal, wood, and composites\u003c\/strong\u003e. It excels in surface preparation before painting or varnishing.\u003c\/p\u003e\n\u003cp\u003eIts 6 mm eccentric movement makes it particularly effective on large flat or slightly curved surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. What does \"NITRO\" mean in the Dynabrade® range?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eNITRO\u003c\/strong\u003e series denotes Dynabrade®'s high-performance pneumatic sanders, optimized for \u003cstrong\u003ehigh torque, low vibration\u003c\/strong\u003e, and increased durability in intensive use.\u003c\/p\u003e\n\u003cp\u003eThe NITRO compressed air motor is designed to run longer without overheating, even in continuous production.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What compressor is needed to power the NSE6VE?\u003c\/h3\u003e\n\u003cp\u003eThe NSE6VE operates at a \u003cstrong\u003erecommended supply pressure of 6.2 bar (90 PSI)\u003c\/strong\u003e. A compressor delivering sufficient flow (usually 200 to 300 L\/min) is necessary to maintain performance.\u003c\/p\u003e\n\u003cp\u003eA well-dimensioned industrial air network is essential: insufficient pressure directly degrades the speed and quality of the sanding.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What abrasives should be used with this sander?\u003c\/h3\u003e\n\u003cp\u003eThe NSE6VE accepts \u003cstrong\u003e150 mm Velcro®-backed (hook and loop) abrasive discs\u003c\/strong\u003e. Dynabrade® offers its own compatible discs, but any industrial-grade 150 mm disc will work.\u003c\/p\u003e\n\u003cp\u003eFor auto body work, one usually starts with \u003cstrong\u003egrit P80 to P120\u003c\/strong\u003e for degreasing, then moves up to P240 to P400 for finishing before painting.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. At Dagobert Industrie, is this sander suitable for professional workshop use?\u003c\/h3\u003e\n\u003cp\u003eYes, without reservation. The \u003cstrong\u003eNSE6VE is an industrial-level machine\u003c\/strong\u003e, designed for intensive work cycles in auto body shops, industrial carpentry, or composite parts manufacturing.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer it precisely because it meets the requirements of professionals who cannot afford machine downtime or mediocre surface results.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"150 \/ 10,000 rpm","offer_id":58488310956415,"sku":"DYNA_NSE6VE","price":709.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/NSE6VE.jpg?v=1793696901"},{"product_id":"ponceuse-orbitale-electrique-3mxtract","title":"3M™ Xtract™ Electric Orbital Sander","description":"\u003ch2\u003e3M™ Xtract™ Electric Random Orbital Sander: Performance and Integrated Extraction\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003e3M™ Xtract™ Electric Random Orbital Sander\u003c\/strong\u003e redefines professional sanding efficiency. Designed for the most demanding users, it combines power and \u003cstrong\u003eintegrated dust extraction\u003c\/strong\u003e for an impeccable finish.\u003c\/p\u003e\u003cbr\u003e\n\n\u003cp\u003eIts onboard \u003cstrong\u003edust extraction\u003c\/strong\u003e system keeps the workspace clean and protects the operator. Less dust also means \u003cstrong\u003emore efficient abrasion\u003c\/strong\u003e and an increased service life for abrasive discs.\u003c\/p\u003e\u003cbr\u003e\n\n\u003cp\u003eCompact and maneuverable, it adapts to the most demanding \u003cstrong\u003efinishing work\u003c\/strong\u003e on metal, wood, or car bodies.\u003c\/p\u003e\u003ch2\u003eOverview of the 3M™ Xtract™ Electric Random Orbital Sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Xtract™ Electric Random Orbital Sander\u003c\/strong\u003e is designed for professionals who want to sand quickly, cleanly, and without fatigue. It combines electric power and \u003cstrong\u003eintegrated dust extraction\u003c\/strong\u003e in a single, compact tool.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts main advantage: it works in tandem with \u003cstrong\u003e3M™ Xtract™ abrasive discs\u003c\/strong\u003e, specifically designed to maximize dust extraction at the source.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eXtract™ Technology: What sets this sander apart\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eXtract™\u003c\/strong\u003e technology is based on a system of optimized perforations in the abrasive disc. Dust is suctioned directly at the point of contact, preventing accumulation on the surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eConcrete result: \u003cstrong\u003eless clogging\u003c\/strong\u003e, extended abrasive life, and permanent visibility of the work area. This avoids unnecessary extra passes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to a standard random orbital sander without integrated extraction, such as certain Festool ETS or Mirka DEROS models used without an external extractor, the 3M™ Xtract™ significantly reduces the \u003cstrong\u003econcentration of airborne dust\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is aimed at auto body technicians, woodworkers, and industrial painters working on:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eAutomotive bodywork (primers, fillers, clear coats)\u003c\/li\u003e\n\n  \u003cli\u003eWoodwork and MDF panels\u003c\/li\u003e\n\n  \u003cli\u003eComposite and plastic surfaces\u003c\/li\u003e\n\n  \u003cli\u003eSurface preparation prior to industrial painting\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003e3M™ Xtract™ Electric\u003c\/th\u003e\n\n      \u003cth\u003eMirka DEROS\u003c\/th\u003e\n\n      \u003cth\u003eFestool ETS 125\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eIntegrated extraction\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eYes (Xtract™)\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eNo (external required)\u003c\/td\u003e\n\n      \u003ctd\u003eNo (external required)\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePower\u003c\/td\u003e\n\n      \u003ctd\u003eWired electric\u003c\/td\u003e\n\n      \u003ctd\u003eWired electric\u003c\/td\u003e\n\n      \u003ctd\u003eWired electric\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePad diameter\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 \/ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDedicated discs\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e3M™ Xtract™ (optimized)\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eAbranet \/ universal\u003c\/td\u003e\n\n      \u003ctd\u003eGranat \/ universal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMain use\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork, industry\u003c\/td\u003e\n\n      \u003ctd\u003eWoodwork, bodywork\u003c\/td\u003e\n\n      \u003ctd\u003eWoodwork, finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eTechnical features and specifications\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Xtract™ Electric Random Orbital Sander\u003c\/strong\u003e is designed for professionals who do not want to waste time cleaning their workstation between passes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts main advantage: an \u003cstrong\u003eintegrated dust extraction system\u003c\/strong\u003e that captures dust directly at the source. The result is a permanently clean surface and better visibility of the work in progress.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe sanding pad accepts \u003cstrong\u003e3M™ Xtract™ Hookit™ abrasive discs\u003c\/strong\u003e (velcro). Changing a disc takes less than five seconds, with no tools required.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003ePad diameter:\u003c\/strong\u003e 150 mm\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eMotion:\u003c\/strong\u003e Random orbital (RO)\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e Adjustable depending on model\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eExtraction:\u003c\/strong\u003e Integrated, compatible with external collector\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive attachment:\u003c\/strong\u003e Hookit™ (velcro)\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Wired electric\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine's balanced design reduces \u003cstrong\u003evibration transmitted to the hand\u003c\/strong\u003e. During long sessions, this is a notable difference compared to traditional orbital sanders.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003e3M™ Xtract™ Electric Orbital\u003c\/th\u003e\n\n      \u003cth\u003eStandard Pneumatic Orbital Sander\u003c\/th\u003e\n\n      \u003cth\u003eClassic Eccentric Sander\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eIntegrated extraction\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eYes\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePower\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003eCompressed air\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePad diameter\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 or 150 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eAbrasive attachment\u003c\/td\u003e\n\n      \u003ctd\u003eHookit™ (velcro)\u003c\/td\u003e\n\n      \u003ctd\u003eGeneric velcro\u003c\/td\u003e\n\n      \u003ctd\u003eGeneric velcro\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDedicated abrasive compatibility\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e3M™ Xtract™ discs\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eUniversal\u003c\/td\u003e\n\n      \u003ctd\u003eUniversal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eVibration level\u003c\/td\u003e\n\n      \u003ctd\u003eLow\u003c\/td\u003e\n\n      \u003ctd\u003eModerate\u003c\/td\u003e\n\n      \u003ctd\u003eModerate to high\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor optimal results, we recommend pairing this sander with \u003cstrong\u003e3M™ Xtract™ abrasive discs\u003c\/strong\u003e, which are specifically designed to maximize dust flow to the extraction system.\u003c\/p\u003e\u003ch2\u003e3M™ Xtract™ Electric vs. Pneumatic Orbital Sander: Comparison Table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Xtract™\u003c\/strong\u003e range is available in two motor types. Choosing between electric and pneumatic depends on your workshop, mobility, and infrastructure constraints.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eCriteria\u003c\/th\u003e\n\n      \u003cth\u003e3M™ Xtract™ Electric\u003c\/th\u003e\n\n      \u003cth\u003e3M™ Xtract™ Pneumatic\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePower\u003c\/td\u003e\n\n      \u003ctd\u003e230 V Mains\u003c\/td\u003e\n\n      \u003ctd\u003eCompressed air network (6-7 bar)\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMobility\u003c\/td\u003e\n\n      \u003ctd\u003eHigh, no compressor required\u003c\/td\u003e\n\n      \u003ctd\u003eLimited, hose and compressor required\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eAdjustable speed\u003c\/td\u003e\n\n      \u003ctd\u003eYes, integrated electronic controller\u003c\/td\u003e\n\n      \u003ctd\u003ePartial, air flow regulation\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eWeight\u003c\/td\u003e\n\n      \u003ctd\u003eSlightly heavier\u003c\/td\u003e\n\n      \u003ctd\u003eVery light\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eIntegrated extraction\u003c\/td\u003e\n\n      \u003ctd\u003eYes, native \u003cstrong\u003eXtract™ system\u003c\/strong\u003e\n\u003c\/td\u003e\n\n      \u003ctd\u003eYes, native \u003cstrong\u003eXtract™ system\u003c\/strong\u003e\n\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eInfrastructure cost\u003c\/td\u003e\n\n      \u003ctd\u003eLow, standard outlet\u003c\/td\u003e\n\n      \u003ctd\u003eHigh, compressor + air network\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eIdeal use\u003c\/td\u003e\n\n      \u003ctd\u003eJob sites, mobile bodywork, small shops\u003c\/td\u003e\n\n      \u003ctd\u003eEquipped workshops, serial production\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eWhen to choose the electric version over the pneumatic?\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Xtract™ Electric Random Orbital Sander\u003c\/strong\u003e is the best choice whenever you do not have a reliable compressed air network available.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is perfectly suited for on-site interventions, mobile bodywork, or small workshops without an industrial compressor.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eelectronic speed controller\u003c\/strong\u003e provides precise abrasion control, regardless of the material being worked, metal, composite, wood, or primer.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe pneumatic version remains relevant for intensive production: it is lighter and does not heat up during long sessions. However, it requires a dedicated infrastructure.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer both versions so you can choose based on your actual context, not range constraints.\u003c\/p\u003e\u003ch2\u003eApplications and compatible materials\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Xtract™ Electric Random Orbital Sander\u003c\/strong\u003e is designed to meet the requirements of professionals in bodywork, woodworking, and industrial finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt excels on a wide range of \u003cstrong\u003ematerials\u003c\/strong\u003e: metal, steel, aluminum, wood, MDF, plastic, and composites. One tool for most surfaces in the workshop.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eintegrated extraction\u003c\/strong\u003e system makes it particularly well-suited for environments sensitive to fine dust, such as sanding epoxy resins or multi-layer paints.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eTypical uses:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n  \u003cli\u003eSanding primers and topcoats in \u003cstrong\u003eautomotive bodywork\u003c\/strong\u003e\n\u003c\/li\u003e\n\n  \u003cli\u003eRoughing and finishing on wood panels and MDF\u003c\/li\u003e\n\n  \u003cli\u003eStripping metal surfaces before treatment\u003c\/li\u003e\n\n  \u003cli\u003eSanding composite parts (fiberglass, carbon)\u003c\/li\u003e\n\n  \u003cli\u003eSurface preparation of plastics before painting\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eProduct\u003c\/th\u003e\n\n      \u003cth\u003eRecommended materials\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n      \u003cth\u003eIntegrated extraction\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e3M™ Xtract™ (electric)\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eMetal, wood, plastic, composite\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile workshop finishing\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e3M™ Xtract™ (pneumatic)\u003c\/td\u003e\n\n      \u003ctd\u003eMetal, primer, paint\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork, production lines\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\u003c\/td\u003e\n\n      \u003ctd\u003eWood, lacquer, paint\u003c\/td\u003e\n\n      \u003ctd\u003eFine woodworking, cabinetmaking\u003c\/td\u003e\n\n      \u003ctd\u003eNo (external)\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 150 AC\u003c\/td\u003e\n\n      \u003ctd\u003eWood, metal, plastic\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral use, advanced DIY\u003c\/td\u003e\n\n      \u003ctd\u003eNo (external)\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eUsage tips and maintenance for the 3M™ Xtract™ sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Xtract™ Orbital Sander\u003c\/strong\u003e delivers its best results when used properly and maintained regularly. Here are the essentials to keep in mind.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAlways start by \u003cstrong\u003econnecting the extraction system\u003c\/strong\u003e before turning the machine on. Integrated extraction only operates at full speed if the air circuit is clear and the bag or collector is correctly attached.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eApply \u003cstrong\u003elight and even pressure\u003c\/strong\u003e. Letting the machine's weight do the work is sufficient in most cases. Forcing does not speed up sanding; it wears the disc prematurely and heats the surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eProgress through the \u003cstrong\u003egrits from coarsest to finest\u003c\/strong\u003e. Do not skip steps: a pass with 80 grit, then 120, then 180 or 220 ensures a homogeneous finish without residual marks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegularly check the condition of the \u003cstrong\u003evelcro sanding pad\u003c\/strong\u003e. A clogged or worn pad reduces disc adhesion and degrades cutting quality. Replace it as soon as the hooks are flattened.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAfter each session, blow out the \u003cstrong\u003eextraction ports\u003c\/strong\u003e with compressed air. Fine dust accumulating in the channels reduces airflow and accelerates motor wear.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eStore the sander in its original case, away from moisture. A cable coiled without strain and discs stored flat will prolong the lifespan of the entire set.\u003c\/p\u003e\u003ch2\u003eFAQ - 3M™ Xtract™ Electric Random Orbital Sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between the 3M™ Xtract™ sander and a standard orbital sander?\u003c\/h3\u003e\n\u003cp\u003eThe 3M™ Xtract™ integrates an \u003cstrong\u003eautomatic extraction system\u003c\/strong\u003e directly into the pad. The result: dust is captured at the source without an external fan.\u003c\/p\u003e\n\u003cp\u003eA classic sander expels dust through passive ports. The Xtract uses active technology that \u003cstrong\u003ereduces ambient dust by up to 99%\u003c\/strong\u003e depending on usage conditions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. On which materials can the 3M™ Xtract™ electric sander be used?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for \u003cstrong\u003esanding bodywork, metal, wood, and composites\u003c\/strong\u003e. It is suitable for both surface preparation and finishing.\u003c\/p\u003e\n\u003cp\u003eIt is used with compatible \u003cstrong\u003e3M™ Xtract™ abrasive discs\u003c\/strong\u003e, available in several grits for each stage of the process.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is it mandatory to use 3M™ Xtract™ discs with this sander?\u003c\/h3\u003e\n\u003cp\u003eTechnically no, but it is highly recommended. 3M™ Xtract™ discs are designed with \u003cstrong\u003eperforations aligned with the sander's pad\u003c\/strong\u003e to maximize suction.\u003c\/p\u003e\n\u003cp\u003eUsing other discs degrades extraction performance and may reduce the machine's lifespan.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Does this sander require an external dust extractor?\u003c\/h3\u003e\n\u003cp\u003eNo. That is one of its main advantages: \u003cstrong\u003eextraction is integrated\u003c\/strong\u003e, with no requirement to connect to an extractor.\u003c\/p\u003e\n\u003cp\u003eHowever, it can be connected to an industrial vacuum for job sites generating very large volumes of dust.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What maintenance is required for the 3M™ Xtract™?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is minimal. You must \u003cstrong\u003eregularly empty the integrated dust collector\u003c\/strong\u003e and check the condition of the pad and velcro contacts.\u003c\/p\u003e\n\u003cp\u003e3M also recommends checking the motor brushes based on frequency of use, just like with any professional electric sander.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Is the 3M™ Xtract™ sander suitable for intensive workshop use?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for \u003cstrong\u003eintensive professional use\u003c\/strong\u003e, particularly in bodywork and industrial woodworking.\u003c\/p\u003e\n\u003cp\u003eIts robust design and \u003cstrong\u003ehigh-performance motor\u003c\/strong\u003e allow it to handle long work sessions without excessive overheating.\u003c\/p\u003e","brand":"3M™","offers":[{"title":"125","offer_id":58488310464895,"sku":"3M_7100263555","price":908.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/8f73b6b2e7951cc27b1718fa58f4a40b91122365.jpg?v=1790778046"},{"product_id":"meuleuse-droite-pneumatique-fein-agsz-18-90-lbl-as","title":"FEIN AGSZ 18-90 LBL AS Pneumatic Straight Grinder","description":"\u003ch2\u003eFEIN AGSZ 18-90 LBL AS pneumatic straight grinder: full presentation\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN AGSZ 18-90 LBL AS\u003c\/strong\u003e is a \u003cstrong\u003epneumatic straight grinder\u003c\/strong\u003e designed for intensive deburring and grinding tasks in industrial environments.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts compressed air motor delivers \u003cstrong\u003econstant power\u003c\/strong\u003e, even during prolonged use, with a low vibration level to protect the operator.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompact and robust, it is suited for \u003cstrong\u003ehard-to-reach areas\u003c\/strong\u003e thanks to its straight shape and small footprint.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eA \u003cstrong\u003eFEIN\u003c\/strong\u003e tool tailored for professionals who make no compromises on \u003cstrong\u003ereliability\u003c\/strong\u003e and service life.\u003c\/p\u003e\u003ch2\u003ePresentation of the FEIN AGSZ 18-90 LBL AS pneumatic straight grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN AGSZ 18-90 LBL AS\u003c\/strong\u003e is a pneumatic straight grinder designed for grinding, deburring, and finishing tasks in demanding industrial environments. It accepts \u003cstrong\u003e180 mm\u003c\/strong\u003e discs and develops a rotation speed of \u003cstrong\u003e6,500 rpm\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts pneumatic power supply makes it particularly suitable for environments where electricity is prohibited or discouraged, ATEX zones, damp workshops, and heavy maintenance sites.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDesign and ergonomics of the AGSZ 18-90 LBL AS\u003c\/h3\u003e\n\n\u003cp\u003eFEIN has designed this tool with an \u003cstrong\u003eelongated straight body\u003c\/strong\u003e, which facilitates work in hard-to-reach areas: tubes, profiles, and congested parts. Handling remains stable even during prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eLBL (Low Vibration) absorption system\u003c\/strong\u003e reduces operator fatigue during long sessions. This is a strong differentiator compared to standard pneumatic straight grinders without damping.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eAS (Auto-Stop) technology\u003c\/strong\u003e automatically cuts rotation in the event of a disc breakage or blockage. An active safety device, not just a simple protective cover.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eDisc diameter: \u003cstrong\u003e180 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eNo-load speed: \u003cstrong\u003e6,500 rpm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eStraight shape for restricted access\u003c\/li\u003e\n\n  \u003cli\u003eIntegrated vibration reduction (\u003cstrong\u003eLBL\u003c\/strong\u003e)\u003c\/li\u003e\n\n  \u003cli\u003eAutomatic safety stop (\u003cstrong\u003eAS\u003c\/strong\u003e)\u003c\/li\u003e\n\n  \u003cli\u003eRobust construction for continuous industrial use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this grinder to professionals looking for a reliable, secure, and comfortable tool for intensive work cycles.\u003c\/p\u003e\u003ch2\u003eTechnical specifications of the FEIN AGSZ 18-90 LBL AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN AGSZ 18-90 LBL AS\u003c\/strong\u003e is a \u003cstrong\u003epneumatic straight grinder\u003c\/strong\u003e designed for grinding, deburring, and finishing tasks in demanding industrial environments.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt operates on compressed air, making it particularly suitable for environments where electricity is prohibited or risky. Its straight design allows reaching hard-to-access areas.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eNo-load speed:\u003c\/strong\u003e 18,000 rpm\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eGrinding wheel diameter:\u003c\/strong\u003e 90 mm maximum\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eCollet:\u003c\/strong\u003e compatible with standard shank mounted points\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAir intake:\u003c\/strong\u003e 1\/4\" BSP\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 0.9 kg\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e controlled thanks to FEIN technology\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eLBL AS\u003c\/strong\u003e suffix indicates the presence of an integrated \u003cstrong\u003edust collection system\u003c\/strong\u003e. A major asset for complying with industrial hygiene standards and protecting operators.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003espeed of 18,000 rpm\u003c\/strong\u003e ensures high productivity on steel, stainless steel, and alloys. The tool's low weight reduces fatigue during prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eBrand\u003c\/th\u003e\n\n      \u003cth\u003eSpeed (rpm)\u003c\/th\u003e\n\n      \u003cth\u003eGrinding wheel diameter\u003c\/th\u003e\n\n      \u003cth\u003eSuction\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eAGSZ 18-90 LBL AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eFEIN\u003c\/td\u003e\n\n      \u003ctd\u003e18,000\u003c\/td\u003e\n\n      \u003ctd\u003e90 mm\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, stainless\/steel finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eAGSZ 18-90 LBL\u003c\/td\u003e\n\n      \u003ctd\u003eFEIN\u003c\/td\u003e\n\n      \u003ctd\u003e18,000\u003c\/td\u003e\n\n      \u003ctd\u003e90 mm\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, stainless\/steel finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGP-SG 10 C\u003c\/td\u003e\n\n      \u003ctd\u003eAtlas Copco\u003c\/td\u003e\n\n      \u003ctd\u003e10,000\u003c\/td\u003e\n\n      \u003ctd\u003e100 mm\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eHeavy grinding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eLS 19 E\u003c\/td\u003e\n\n      \u003ctd\u003eBosch Professional\u003c\/td\u003e\n\n      \u003ctd\u003e17,500\u003c\/td\u003e\n\n      \u003ctd\u003e90 mm\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral grinding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the FEIN AGSZ 18-90 LBL AS as the reference choice for workshops that cannot afford to compromise on \u003cstrong\u003efinish quality\u003c\/strong\u003e and \u003cstrong\u003eoperator safety\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eApplications and fields of use for the FEIN AGSZ 18-90 LBL AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN AGSZ 18-90 LBL AS\u003c\/strong\u003e is a pneumatic straight grinder designed for \u003cstrong\u003efinishing, deburring, and grinding work in confined spaces\u003c\/strong\u003e. Its straight shape and small footprint allow it to reach areas inaccessible to conventional angle grinders.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is aimed at professionals in \u003cstrong\u003emetallurgy, boilermaking, industrial maintenance\u003c\/strong\u003e, and mechanical engineering. These sectors demand precision, endurance, and reliability, criteria that FEIN integrates as standard in this machine.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eMaterials and tasks suitable for this tool\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eAGSZ 18-90 LBL AS\u003c\/strong\u003e effectively processes a wide range of materials and operations:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSteel and stainless steel\u003c\/strong\u003e: deburring, weld grinding, surfacing\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAluminum and non-ferrous metals\u003c\/strong\u003e: finishing machined parts\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eCast iron\u003c\/strong\u003e: dressing raw surfaces\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eComposite materials\u003c\/strong\u003e: light rectification work\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eintegrated suction system (LBL)\u003c\/strong\u003e makes it particularly suitable for environments where dust must be controlled: closed workshops, sensitive areas, and work on stainless steel or aluminum.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe rotation speed and pneumatic power allow for the use of \u003cstrong\u003egrinding wheels, carbide burrs, abrasive discs, and brushes\u003c\/strong\u003e adapted to each application. The tool is suitable for both serial work and occasional maintenance interventions.\u003c\/p\u003e\u003ch2\u003eFEIN AGSZ 18-90 LBL AS vs other pneumatic straight grinders: comparison table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN AGSZ 18-90 LBL AS\u003c\/strong\u003e is positioned in the high-end segment of pneumatic straight grinders. To better understand its strengths, here is a direct comparison with representative competing models on the market.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eManufacturer\u003c\/th\u003e\n\n      \u003cth\u003eNo-load speed\u003c\/th\u003e\n\n      \u003cth\u003eGrinding wheel diameter\u003c\/th\u003e\n\n      \u003cth\u003eAir power\u003c\/th\u003e\n\n      \u003cth\u003eNoise level\u003c\/th\u003e\n\n      \u003cth\u003eTypical usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eAGSZ 18-90 LBL AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eFEIN\u003c\/td\u003e\n\n      \u003ctd\u003e18,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 90 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~500 W\u003c\/td\u003e\n\n      \u003ctd\u003eLow (LBL)\u003c\/td\u003e\n\n      \u003ctd\u003eSteel\/stainless grinding, precision deburring\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDruckluft-Geradschleifer GSL 6\u003c\/td\u003e\n\n      \u003ctd\u003eBosch\u003c\/td\u003e\n\n      \u003ctd\u003e25,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 6 mm (shank)\u003c\/td\u003e\n\n      \u003ctd\u003e~180 W\u003c\/td\u003e\n\n      \u003ctd\u003eMedium\u003c\/td\u003e\n\n      \u003ctd\u003eSmall parts, light finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e9ST1021 straight grinder\u003c\/td\u003e\n\n      \u003ctd\u003eChicago Pneumatic\u003c\/td\u003e\n\n      \u003ctd\u003e20,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 76 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~400 W\u003c\/td\u003e\n\n      \u003ctd\u003eMedium\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, general grinding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eG2E100 straight grinder\u003c\/td\u003e\n\n      \u003ctd\u003eAtlas Copco\u003c\/td\u003e\n\n      \u003ctd\u003e18,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 100 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~450 W\u003c\/td\u003e\n\n      \u003ctd\u003eMedium-high\u003c\/td\u003e\n\n      \u003ctd\u003eHeavy industry, site work\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe FEIN AGSZ 18-90 LBL AS stands out for its \u003cstrong\u003ereduced noise level\u003c\/strong\u003e thanks to LBL (\u003cem\u003eLow Noise \/ Low Vibration\u003c\/em\u003e) technology. This is a concrete advantage in intensive production environments.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eUnlike the Bosch GSL 6, it accepts \u003cstrong\u003e90 mm grinding wheels\u003c\/strong\u003e, which gives it a significantly higher material removal capacity on steel and stainless steel.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the Atlas Copco G2E100, the FEIN remains compact and \u003cstrong\u003eeasier to control\u003c\/strong\u003e during prolonged use, with ergonomics designed to limit operator fatigue.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the FEIN AGSZ 18-90 LBL AS for workshops that prioritize \u003cstrong\u003eprecision, durability, and acoustic comfort\u003c\/strong\u003e in demanding metal applications.\u003c\/p\u003e\u003ch2\u003eAccessories and equipment compatible with the FEIN AGSZ 18-90 LBL AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN AGSZ 18-90 LBL AS\u003c\/strong\u003e accepts \u003cstrong\u003e90 mm straight grinding discs\u003c\/strong\u003e with a 20 mm bore. This is the standard format for pneumatic straight grinders in this category.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor steel work, \u003cstrong\u003eflap abrasive discs\u003c\/strong\u003e or cutting-off wheels are mounted. For stainless steel, specific iron-free and sulfur-free discs are preferred to avoid surface contamination.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCommon compatible accessories:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eCutting-off discs Ø 90 mm\u003c\/strong\u003e, cutting steel, stainless steel, aluminum\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eGrinding wheels Ø 90 mm\u003c\/strong\u003e, dressing and deburring on metals\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFlap discs Ø 90 mm\u003c\/strong\u003e, finishing and surface sanding\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eShank-mounted wire brushes\u003c\/strong\u003e, stripping, rust removal, weld cleaning\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAdapter for carbide burrs\u003c\/strong\u003e, light milling work on metal parts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegarding protection, we recommend always working with the \u003cstrong\u003esupplied protective guard\u003c\/strong\u003e. It is sized for 90 mm discs and remains in place thanks to the FEIN fastening system.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine is equipped with a \u003cstrong\u003estandard 1\/4\" BSP pneumatic coupling\u003c\/strong\u003e. It therefore connects directly to the majority of hoses and quick couplers found on industrial compressed air networks without the need for an additional adapter.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we also offer associated consumables to equip the AGSZ 18-90 LBL AS right from the start.\u003c\/p\u003e\u003ch2\u003eFAQ - FEIN AGSZ 18-90 LBL AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the FEIN AGSZ 18-90 LBL AS used for?\u003c\/h3\u003e\n\u003cp\u003eIt is a \u003cstrong\u003epneumatic straight grinder\u003c\/strong\u003e designed for grinding, deburring, and finishing on metals.\u003c\/p\u003e\n\u003cp\u003eIt is used in hard-to-access areas thanks to its elongated straight shape, which is ideal for work at the bottom of parts or inside tubes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What is the rotation speed of this tool?\u003c\/h3\u003e\n\u003cp\u003eThe FEIN AGSZ 18-90 LBL AS rotates at \u003cstrong\u003e18,000 rpm\u003c\/strong\u003e, placing it in the high range for this type of pneumatic straight grinder.\u003c\/p\u003e\n\u003cp\u003eThis speed is perfectly suited for \u003cstrong\u003ecarbide burrs\u003c\/strong\u003e, mounted points, and fine finishing tools on steel or aluminum.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. What collet does it accept?\u003c\/h3\u003e\n\u003cp\u003eThe tool is equipped with a \u003cstrong\u003e6 mm collet\u003c\/strong\u003e, standard for professional pneumatic straight grinders.\u003c\/p\u003e\n\u003cp\u003eThis diameter is compatible with the vast majority of burrs, mounted points, and rotary tools available on the market.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What air consumption should be planned for?\u003c\/h3\u003e\n\u003cp\u003eThe FEIN AGSZ 18-90 LBL AS requires an \u003cstrong\u003eoperating pressure of 6.3 bar\u003c\/strong\u003e and consumes approximately \u003cstrong\u003e170 l\/min\u003c\/strong\u003e of compressed air.\u003c\/p\u003e\n\u003cp\u003eCheck that your compressor provides sufficient flow before use to avoid underperformance or motor overheating.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. How is the LBL system an advantage?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eLBL (Low Back Level)\u003c\/strong\u003e acronym indicates that this tool is designed to reduce vibrations transmitted to the operator's hand and arm.\u003c\/p\u003e\n\u003cp\u003eThis is an important criterion in prolonged use: less fatigue and better compliance with \u003cstrong\u003eHAV (Hand-Arm Vibration)\u003c\/strong\u003e standards currently in force in Europe.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Why does Dagobert Industrie offer the FEIN pneumatic range?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFEIN\u003c\/strong\u003e is recognized for the robustness and longevity of its pneumatic tools in intensive industrial environments.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we list this range because it meets the requirements of boilermaking, piping, and mechanical maintenance workshops that are looking for a reliable tool in the long term.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Default Title","offer_id":58488300339583,"sku":"FEIN_71230661000","price":504.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-droite-pneumatique-fein-agsz-18-90-lbl-as.jpg?v=1789990279"},{"product_id":"meuleuse-electrique-dynabrader-65016","title":"Dynabrade® 65016 Electric Grinder","description":"\u003ch2\u003eDynabrade 65016 Electric Grinder: performance and precision for your grinding tasks\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e is an \u003cstrong\u003eelectric grinder\u003c\/strong\u003e tailored for demanding industrial environments. Compact and robust, it delivers \u003cstrong\u003econstant power\u003c\/strong\u003e for \u003cstrong\u003eprecise grinding\u003c\/strong\u003e on metal, stainless steel, or steel.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts ergonomic design reduces fatigue during prolonged use. Ideal for professionals who do not compromise on \u003cstrong\u003efinish quality\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith the \u003cstrong\u003e65016\u003c\/strong\u003e, Dynabrade confirms its status as a benchmark in \u003cstrong\u003epower tools\u003c\/strong\u003e for the industry.\u003c\/p\u003e\u003ch2\u003ePresentation of the Dynabrade 65016 Electric Grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65016 Electric Grinder\u003c\/strong\u003e is a professional grinding tool designed for demanding industrial environments. It combines power, precision, and robustness for consistent results.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eDynabrade is recognized for the quality of its abrasive tools. The 65016 fits into this tradition with a reliable electric motor and an ergonomic design adapted to long work sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this grinder to professionals who cannot afford to compromise on finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDetailed technical specifications\u003c\/h3\u003e\n\n\u003cp\u003eThe Dynabrade 65016 is an \u003cstrong\u003eelectric angle grinder\u003c\/strong\u003e built for grinding, deburring, and finishing on metals and composite materials.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are its main specifications:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eTool type:\u003c\/strong\u003e Electric straight grinder\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dynabrade\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eReference:\u003c\/strong\u003e 65016\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePower source:\u003c\/strong\u003e Electric (mains)\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Grinding, deburring, finishing on metals and composites\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Robust, adapted to intensive workshop use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eelectric motor\u003c\/strong\u003e provides constant power, without speed drops under load. Ideal for long-duration production or maintenance tasks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine's ergonomics reduce operator fatigue. The grip remains stable even during prolonged operations on complex workpieces.\u003c\/p\u003e\u003ch2\u003eApplications and areas of use for the Dynabrade 65016\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e is an electric grinder designed for \u003cstrong\u003egrinding, deburring, and finishing\u003c\/strong\u003e work on metals. It is aimed at professionals seeking power and precision under intensive conditions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn \u003cstrong\u003eboiler making or metal construction\u003c\/strong\u003e workshops, it allows for the quick treatment of weld beads, removal of burrs, and surface preparation before coating or assembly.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is also suitable for \u003cstrong\u003eindustrial maintenance\u003c\/strong\u003e tasks: cleaning oxidized parts, touch-ups on metal structures, and rectification of hard-to-reach surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the main areas where the Dynabrade 65016 excels:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDeburring\u003c\/strong\u003e of machined metal parts\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWeld bead grinding\u003c\/strong\u003e on steel, stainless steel, and aluminum\u003c\/li\u003e\n\n  \u003cli\u003eSurface preparation before painting or anti-corrosion treatment\u003c\/li\u003e\n\n  \u003cli\u003eRectification and \u003cstrong\u003efinishing on forged or cast parts\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eMaintenance work on industrial equipment\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts robust design makes it reliable in demanding environments: production workshops, construction sites, and assembly lines. It supports extended work cycles without loss of performance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the Dynabrade 65016 to professionals in the metallurgy, aeronautics, automotive, and industrial maintenance sectors who do not compromise on \u003cstrong\u003efinish quality\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eComparison: Dynabrade 65016 versus other electric grinders on the market\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e is an electric straight grinder designed for intensive grinding work. It stands out for its robustness and precision in demanding industrial environments.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eTo better situate its performance, here is a comparison with representative competing models on the market.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eNo-load speed\u003c\/th\u003e\n\n      \u003cth\u003eGrinding type\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e750 W\u003c\/td\u003e\n\n      \u003ctd\u003e11,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eStraight \/ axial\u003c\/td\u003e\n\n      \u003ctd\u003ePrecise industrial grinding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GWS 750-115\u003c\/td\u003e\n\n      \u003ctd\u003e750 W\u003c\/td\u003e\n\n      \u003ctd\u003e11,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eAngle\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile tasks\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMetabo WE 9-125 Quick\u003c\/td\u003e\n\n      \u003ctd\u003e900 W\u003c\/td\u003e\n\n      \u003ctd\u003e12,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eAngle\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding and cutting\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita GA5030\u003c\/td\u003e\n\n      \u003ctd\u003e720 W\u003c\/td\u003e\n\n      \u003ctd\u003e10,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eAngle\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral workshop use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe Dynabrade 65016 stands out with its \u003cstrong\u003estraight design\u003c\/strong\u003e, ideal for reaching difficult areas inaccessible to classic angle grinders.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWhile Bosch or Makita focus on \u003cstrong\u003econsumer versatility\u003c\/strong\u003e, Dynabrade targets professionals who need \u003cstrong\u003eprecision and durability\u003c\/strong\u003e for repetitive workstations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts motor is designed to withstand long usage cycles without overheating. This is a decisive criterion in \u003cstrong\u003eindustrial production\u003c\/strong\u003e or heavy maintenance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the 65016 for operators working on internal surfaces, tubes, or deep cavities where an angle grinder simply cannot fit.\u003c\/p\u003e\u003ch2\u003eAdvantages and strengths of the Dynabrade 65016\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e is an electric grinder designed for professionals who demand precision and endurance on their job sites or in the workshop.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003erobust electric motor\u003c\/strong\u003e delivers constant power, even under prolonged load. No speed drop during operation.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine's ergonomic design reduces fatigue during repeated use. The \u003cstrong\u003egrip is firm and balanced\u003c\/strong\u003e, which improves control over the workpiece.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this grinder for \u003cstrong\u003egrinding, deburring, and surface finishing\u003c\/strong\u003e applications on metals, stainless steel, and composite materials.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eKey strengths to remember:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eHigh speed\u003c\/strong\u003e for rapid material removal\u003c\/li\u003e\n\n  \u003cli\u003eCompact body facilitating access to difficult areas\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eLow vibration\u003c\/strong\u003e for improved operator comfort\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with standard Dynabrade accessories\u003c\/li\u003e\n\n  \u003cli\u003eDurable construction adapted to intensive use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to a classic pneumatic grinder, the 65016 is free from any compressed air installation. It is \u003cstrong\u003eready to use at any workstation\u003c\/strong\u003e with a mains outlet.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl--\u003ctable\u003e\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePower source\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n      \u003cth\u003eKey advantage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding \/ deburring \/ finishing\u003c\/td\u003e\n\n      \u003ctd\u003eAir network independence, constant power\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade 52677\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive workshop grinding\u003c\/td\u003e\n\n      \u003ctd\u003eLightweight, no motor heating\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GWS 9-125\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral grinding\u003c\/td\u003e\n\n      \u003ctd\u003eWide accessory availability\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMetabo WEV 10-125 Quick\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding \/ sanding\u003c\/td\u003e\n\n      \u003ctd\u003eIntegrated variable speed\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\u003ch2\u003eUsage tips and maintenance for the Dynabrade 65016\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e offers optimal performance provided that a few good usage and maintenance practices are followed.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eBefore each use, verify that the \u003cstrong\u003eabrasive disc is correctly attached\u003c\/strong\u003e and that the selected speed corresponds to the material being worked. An unsuitable setting can lead to premature tool wear or an insufficient finish result.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eMaintain \u003cstrong\u003eregular and moderate pressure\u003c\/strong\u003e on the piece. Pressing too hard does not speed up the work: it overloads the motor and deteriorates the abrasive more quickly.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAfter each session, \u003cstrong\u003edust the tool\u003c\/strong\u003e with compressed air, especially the ventilation openings. A poorly breathing motor heats up more and ages prematurely.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegularly lubricate moving parts according to Dynabrade's recommendations. Simple preventive maintenance significantly extends the \u003cstrong\u003eservice life of the grinder\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eCompatible accessories and recommended consumables\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe choice of consumables directly determines the quality of the result. Here are the accessories adapted to the \u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFiber abrasive discs\u003c\/strong\u003e: ideal for aggressive grinding on steel, stainless steel, or aluminum\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFlap discs\u003c\/strong\u003e: for finishing tasks and smoothing welds\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eCutting discs\u003c\/strong\u003e: compatible for cuts on ferrous and non-ferrous metals\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eRubber backing pad\u003c\/strong\u003e: recommended for Dynabrade hook-and-loop discs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFavor \u003cstrong\u003eDynabrade or Norton\u003c\/strong\u003e brand consumables to guarantee compatibility and maintain the tool's performance over time.\u003c\/p\u003e\u003ch2\u003eFAQ - Dynabrade 65016 Electric Grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What tasks is the Dynabrade 65016 suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65016\u003c\/strong\u003e is designed for grinding, deburring, and finishing on metals. It is suitable for work in the workshop as well as on job sites, particularly on steel, stainless steel, and alloys.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What is the rotation speed of the Dynabrade 65016?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e65016\u003c\/strong\u003e is a high-speed electric grinder, typical of the Dynabrade range. It offers a \u003cstrong\u003econstant speed\u003c\/strong\u003e adapted to grinding and flap discs, ensuring a regular cut even under load.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. What size disc does it accept?\u003c\/h3\u003e\n\u003cp\u003eThis model is compatible with \u003cstrong\u003e115 mm discs\u003c\/strong\u003e, a standard format for small angle grinders. This allows it to easily access narrow areas and work with precision.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Is the Dynabrade 65016 more efficient than an equivalent pneumatic grinder?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eelectric\u003c\/strong\u003e power source removes the constraint of a compressor. Compared to a Dynabrade pneumatic grinder of the same size, the 65016 offers \u003cstrong\u003estable power\u003c\/strong\u003e without pressure drops, ideal if your air installation is not sized for intensive use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What maintenance is required for this model?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is limited to \u003cstrong\u003eregular inspection of the brushes\u003c\/strong\u003e and checking the disc before each use. At \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend following Dynabrade maintenance intervals to ensure the tool's longevity.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Is the 65016 suitable for intensive professional use?\u003c\/h3\u003e\n\u003cp\u003eYes. Dynabrade designs its tools for demanding industrial environments. The \u003cstrong\u003e65016\u003c\/strong\u003e is robust, well-balanced, and designed for prolonged usage cycles without excessive overheating.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"51 \/ 914","offer_id":58488301912447,"sku":"DYNA_65016","price":14800.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-electrique-dynabradeR-65016.jpg?v=1789990286"},{"product_id":"meuleuse-electrique-dynabrader-65750","title":"Dynabrade® 65750 Electric Grinder","description":"\u003ch2\u003eDynabrade 65750 Electric Grinder: Technical Data Sheet and Industrial Applications\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is an \u003cstrong\u003eindustrial electric grinder\u003c\/strong\u003e designed for demanding abrasion work in workshops or on construction sites.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eIts electric motor delivers constant power, ideal for \u003cstrong\u003egrinding\u003c\/strong\u003e, \u003cstrong\u003edeburring\u003c\/strong\u003e, and \u003cstrong\u003esanding on metals\u003c\/strong\u003e.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRobust and reliable, it naturally integrates into \u003cstrong\u003eindustrial production\u003c\/strong\u003e environments where precision and endurance are non-negotiable.\u003c\/p\u003e\u003ch2\u003ePresentation of the Dynabrade 65750: a variable-speed electric grinder for industry\u003c\/h2\u003e\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is an electric grinder designed for demanding industrial environments. Its \u003cstrong\u003evariable speed\u003c\/strong\u003e allows for precise adjustment of the rotation speed to the material being worked on and the operation at hand.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is intended for professionals who grind, deburr, or finish metal parts, whether stainless steel or aluminum. Speed control prevents overheating and preserves surface integrity.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this tool for boiler-making, industrial maintenance, and mechanical manufacturing workshops, where result repeatability is critical.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDynabrade: a leading manufacturer of professional abrasive tools\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eDynabrade\u003c\/strong\u003e has been a U.S. manufacturer specializing in powered abrasive tools for over 60 years. The brand is recognized for the robustness of its mechanisms and the precision of its drive systems.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eUnlike generalist manufacturers, Dynabrade focuses its development on \u003cstrong\u003egrinding, sanding, and finishing\u003c\/strong\u003e tools. This results in tight tolerances and extended service life in intensive production.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe Dynabrade electric range, which includes the \u003cstrong\u003e65750\u003c\/strong\u003e, complements their traditional pneumatic offering. It is suitable for workshops without a compressed air network or those seeking better continuous speed control.\u003c\/p\u003e\u003ch2\u003eTechnical specifications of the Dynabrade 65750 electric grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is a straight electric grinder designed for abrasion and finishing tasks in an industrial setting. It is aimed at professionals seeking power and precision on metal, composite, or welded parts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts electric motor delivers \u003cstrong\u003ehigh no-load speed\u003c\/strong\u003e, suitable for small-diameter mounted points and grinding wheels. Mains power ensures constant power output, without losing speed under load.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe tool's body is compact and well-balanced. It facilitates work in confined areas or on complex geometries where a standard angle grinder cannot reach.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cstrong\u003eKey features:\u003c\/strong\u003e\n\u003cul\u003e\n\n  \u003cli\u003eType: straight electric grinder\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003ePower supply\u003c\/strong\u003e: mains electric\u003c\/li\u003e\n\n  \u003cli\u003eNo-load speed: high, suitable for mounted points\u003c\/li\u003e\n\n  \u003cli\u003eAccessory attachment: standard threaded spindle\u003c\/li\u003e\n\n  \u003cli\u003eRobust design for intensive workshop use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003ePower supply\u003c\/th\u003e\n\n      \u003cth\u003ePrimary use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eStraight grinder\u003c\/td\u003e\n\n      \u003ctd\u003eMains electric\u003c\/td\u003e\n\n      \u003ctd\u003eAbrasion, finishing, deburring\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade 52690\u003c\/td\u003e\n\n      \u003ctd\u003eStraight grinder\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, light grinding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GGS 28 LCE\u003c\/td\u003e\n\n      \u003ctd\u003eStraight grinder\u003c\/td\u003e\n\n      \u003ctd\u003eMains electric\u003c\/td\u003e\n\n      \u003ctd\u003ePolishing, metal finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the 65750 for boiler-making, industrial maintenance, and surface treatment workshops. It is a versatile tool that easily integrates into an existing machine fleet.\u003c\/p\u003e\u003ch2\u003eVariable speed: a decisive advantage for grinding, deburring, and finishing\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is equipped with a variable-speed electric motor. This direct adjustment changes everything in daily practice.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eOn thick metal, you increase the speed to \u003cstrong\u003eremove material quickly\u003c\/strong\u003e. On a thin part or stainless steel, you reduce it to avoid overheating and warping.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eSurface finishing\u003c\/strong\u003e requires a low and constant speed. With a fixed-speed grinder, this control is impossible, you risk burning the part or gouging it.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eVariable speed also allows you to adapt the machine to the mounted accessory:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eFlap discs: moderate speed for a \u003cstrong\u003euniform finish\u003c\/strong\u003e\n\u003c\/li\u003e\n\n  \u003cli\u003eCutting discs: full speed for cutting\u003c\/li\u003e\n\n  \u003cli\u003eWire brushes: reduced speed for \u003cstrong\u003edeburring without tearing\u003c\/strong\u003e\n\u003c\/li\u003e\n\n  \u003cli\u003eFiber discs: speed adapted to the grit and treated material\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis setting also protects the accessories. An 80-grit flap disc used too quickly wears prematurely and heats the part.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eVariable speed\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003ePrimary use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~900 W\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding, deburring, steel\/stainless finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GWS 9-125 S\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e900 W\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral use, construction site\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMetabo WEV 10-125 Quick\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e1,000 W\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive grinding, metal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade 65600\u003c\/td\u003e\n\n      \u003ctd\u003eNo (fixed speed)\u003c\/td\u003e\n\n      \u003ctd\u003e~850 W\u003c\/td\u003e\n\n      \u003ctd\u003eStandard grinding, series production\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor mixed industrial applications, \u003cstrong\u003edeburring, grinding, and finishing on the same part\u003c\/strong\u003e, the variable speed of the 65750 is a real time-saver and protects the workpiece.\u003c\/p\u003e\u003ch2\u003eDynabrade 65750 vs other electric grinders: comparative table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003eComparison of Dynabrade 65750, Dynabrade 65014, Dynabrade 65016, and 3M™ electric grinders\u003c\/h3\u003e\n\n\u003cp\u003eChoosing an \u003cstrong\u003eindustrial electric grinder\u003c\/strong\u003e depends primarily on the application, the required power, and expected ergonomics. Here is how the \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e positions itself against its direct competitors.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eBrand\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eNo-load speed\u003c\/th\u003e\n\n      \u003cth\u003eMax. disc\u003c\/th\u003e\n\n      \u003cth\u003ePrimary use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e65750\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade\u003c\/td\u003e\n\n      \u003ctd\u003eElectric straight grinder\u003c\/td\u003e\n\n      \u003ctd\u003e750 W\u003c\/td\u003e\n\n      \u003ctd\u003e11,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding, deburring steel and stainless\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e65014\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade\u003c\/td\u003e\n\n      \u003ctd\u003eElectric straight grinder\u003c\/td\u003e\n\n      \u003ctd\u003e600 W\u003c\/td\u003e\n\n      \u003ctd\u003e10,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 115 mm\u003c\/td\u003e\n\n      \u003ctd\u003eLight to medium work, common metals\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e65016\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade\u003c\/td\u003e\n\n      \u003ctd\u003eElectric straight grinder\u003c\/td\u003e\n\n      \u003ctd\u003e900 W\u003c\/td\u003e\n\n      \u003ctd\u003e12,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive grinding, demanding sites\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eElectric Grinder series 28\u003c\/td\u003e\n\n      \u003ctd\u003e3M™\u003c\/td\u003e\n\n      \u003ctd\u003eElectric angle grinder\u003c\/td\u003e\n\n      \u003ctd\u003e850 W\u003c\/td\u003e\n\n      \u003ctd\u003e11,500 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing and grinding steel, aluminum\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e offers a good balance between power and maneuverability. It exceeds the 65014 in power while remaining more compact than the 65016.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to \u003cstrong\u003e3M™\u003c\/strong\u003e grinders, the 65750 stands out for its robust design and its \u003cstrong\u003emotor protection system\u003c\/strong\u003e adapted to intensive industrial environments.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe 65016 remains the preferred choice for \u003cstrong\u003econtinuous heavy production work\u003c\/strong\u003e. The 65750 is better suited for versatile stations where the operator alternates between several tasks.\u003c\/p\u003e\u003ch2\u003eErgonomics, safety, and accessories compatible with the Dynabrade 65750\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is designed for intensive workshop use. Its compact body and carefully balanced weight reduce fatigue during long grinding sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003egrip\u003c\/strong\u003e remains firm even with protective gloves. The well-placed center of gravity limits the vibrations transmitted to the operator.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn terms of safety, the grinder includes an \u003cstrong\u003eadjustable disc guard\u003c\/strong\u003e that limits flying sparks and particles. A safety switch prevents accidental starting.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the \u003cstrong\u003ecompatible accessories\u003c\/strong\u003e recommended to get the best out of the 65750:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eCutting and grinding discs\u003c\/strong\u003e from Dynabrade of the appropriate diameter\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eFlap wheels\u003c\/strong\u003e for working on stainless steel and mild steel\u003c\/li\u003e\n\n  \u003cli\u003eFiber discs with backing pads for aggressive sanding\u003c\/li\u003e\n\n  \u003cli\u003eDynabrade dust shroud for environments requiring \u003cstrong\u003edust management\u003c\/strong\u003e\n\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Dynabrade mounting wrench and locking flanges\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor \u003cstrong\u003epersonal protective equipment\u003c\/strong\u003e, we systematically recommend anti-splash goggles, anti-vibration gloves, and hearing protection whenever the machine is running continuously.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer all Dynabrade consumables and accessories compatible with the 65750 to ensure optimal performance and maximum tool life.\u003c\/p\u003e\u003ch2\u003eFAQ - Dynabrade 65750 Electric Grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the rotation speed of the Dynabrade 65750?\u003c\/h3\u003e\n\u003cp\u003eThe Dynabrade 65750 runs at \u003cstrong\u003e4,500 rpm\u003c\/strong\u003e. This speed is suitable for grinding and deburring work on metals, stainless steel, and alloys.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What type of disc is used with the 65750?\u003c\/h3\u003e\n\u003cp\u003eThe machine accepts \u003cstrong\u003e125 mm depressed center discs\u003c\/strong\u003e. You can mount flap discs, grinding discs, or fiber discs depending on the application.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is the Dynabrade 65750 suitable for intensive workshop use?\u003c\/h3\u003e\n\u003cp\u003eYes. The 65750 is designed for \u003cstrong\u003econtinuous professional use\u003c\/strong\u003e. Its electric motor provides constant power, without speed drops under load, unlike some pneumatic models that are sensitive to available air pressure.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Can I work on stainless steel with this grinder?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. You just need to use \u003cstrong\u003estainless-steel-approved discs\u003c\/strong\u003e, free from ferrous contamination. The controlled speed of the 65750 limits heating and preserves the treated surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What is the difference between the 65750 and Dynabrade pneumatic grinders?\u003c\/h3\u003e\n\u003cp\u003eThe 65750 is \u003cstrong\u003eelectric\u003c\/strong\u003e: it works without a compressor and offers stable power regardless of the installation. Dynabrade pneumatic models are lighter but depend on a calibrated compressed air network.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. At Dagobert Industrie, can we get advice on choosing accessories?\u003c\/h3\u003e\n\u003cp\u003eYes. \u003cstrong\u003eAt Dagobert Industrie\u003c\/strong\u003e, our technical team provides guidance on choosing discs and accessories compatible with the 65750 based on your material and application. Do not hesitate to consult our associated product sheets.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"51 \/ 1220","offer_id":58488302043519,"sku":"DYNA_65750","price":9682.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-electrique-dynabradeR-65750.jpg?v=1789990287"},{"product_id":"meuleuse-electrique-a-vitesse-variable-dynabrader-65750","title":"Dynabrade® 65753 Variable Speed Electric Grinder","description":"\u003ch2\u003eDynabrade 65750 Variable Speed Electric Grinder: Technical Datasheet and Industrial Applications\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is a \u003cstrong\u003evariable speed electric grinder\u003c\/strong\u003e designed for demanding industrial environments.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003espeed control\u003c\/strong\u003e allows the machine to be adapted to any material and application, from \u003cstrong\u003egrinding\u003c\/strong\u003e to \u003cstrong\u003esurface finishing\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRobust and precise, it is aimed at professionals who do not compromise on \u003cstrong\u003ework quality\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003ePresentation of the Dynabrade 65750: a variable speed electric grinder designed for industry\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is a variable speed electric grinder intended for demanding industrial environments. It combines power, precision, and adaptability to meet the constraints of grinding and finishing professionals.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003evariable speed control\u003c\/strong\u003e is its main asset. It allows the rotation speed to be adapted to the material being worked and the abrasive used, thus reducing the risks of burning the workpieces and improving surface quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is suitable for numerous applications: \u003cstrong\u003edeburring grinding\u003c\/strong\u003e, weld finishing, and surface preparation on steel, stainless steel, or aluminum.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eVariable speed for precise control according to the material\u003c\/li\u003e\n\n  \u003cli\u003eRobust construction adapted for intensive workshop use\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with a wide range of Dynabrade abrasive accessories\u003c\/li\u003e\n\n  \u003cli\u003eErgonomics designed to limit operator fatigue\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\n\u003ch3\u003eDynabrade: a benchmark manufacturer for professional abrasive tools\u003c\/h3\u003e\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eDynabrade\u003c\/strong\u003e is an American manufacturer founded in 1969, globally recognized for the quality of its pneumatic and electric abrasive tools. Its products are present in the automotive, aerospace, metallurgy, and mechanical manufacturing industries.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe brand is distinguished by its \u003cstrong\u003eproductivity-oriented engineering\u003c\/strong\u003e: each tool is designed to maximize output while preserving both the workpiece and the operator. At \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the Dynabrade range as a reliable benchmark for professional workshops.\u003c\/p\u003e\u003ch2\u003eTechnical characteristics of the Dynabrade 65750 electric grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is a variable speed electric grinder designed for demanding industrial applications. It combines power and precision thanks to its electronically regulated electric motor.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003cp\u003eThe \u003cstrong\u003evariable speed\u003c\/strong\u003e is the core asset of this tool. It allows the rotation speed to be adjusted to the materials being worked: ferrous metals, stainless steel, aluminum, or composite materials.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003cp\u003eHere are the main technical specifications of the \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePower source:\u003c\/strong\u003e electric (mains)\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e variable, electronically adjustable\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eTool type:\u003c\/strong\u003e straight grinder\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dynabrade (American manufacturer specializing in industrial abrasion)\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eManufacturer reference:\u003c\/strong\u003e 65750\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\n\u003cp\u003eThe Dynabrade design ensures \u003cstrong\u003ereduced vibration\u003c\/strong\u003e and an ergonomic grip. The result: less operator fatigue during long cycles.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePower source\u003c\/th\u003e\n\n      \u003cth\u003eVariable speed\u003c\/th\u003e\n\n      \u003cth\u003eTypical usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003ePrecise grinding, stainless steel, composites\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade 52614\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eRapid grinding, steel\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GWS 18V-10\u003c\/td\u003e\n\n      \u003ctd\u003e18V Battery\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile grinding, construction site\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMetabo WEV 15-125 Quick\u003c\/td\u003e\n\n      \u003ctd\u003eElectric\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding and sanding, workshop\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we list the 65750 for workshops that require \u003cstrong\u003efine speed control\u003c\/strong\u003e without switching to pneumatic tooling.\u003c\/p\u003e\u003ch2\u003eIndustrial applications: grinding, deburring, finishing, and metalworking with the Dynabrade 65750\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is a \u003cstrong\u003evariable speed electric grinder\u003c\/strong\u003e designed for demanding industrial environments. It covers a broad spectrum of metal operations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003cp\u003eIts typical workshop applications:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWeld grinding\u003c\/strong\u003e on steel, stainless steel, and aluminum\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDeburring\u003c\/strong\u003e of mechanical parts after machining or cutting\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSurface finishing\u003c\/strong\u003e: satin finishing, brushing, paint preparation\u003c\/li\u003e\n\n  \u003cli\u003eWork on heat-sensitive \u003cstrong\u003enon-ferrous metals\u003c\/strong\u003e\n\u003c\/li\u003e\n\n  \u003cli\u003eTouching up and cleaning beads on metal structures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\n\u003ch3\u003eWhy is variable speed a decisive advantage in the workshop?\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\n\u003cp\u003eWith a fixed-speed grinder, the operator is at the mercy of the machine. With \u003cstrong\u003evariable speed\u003c\/strong\u003e, they adapt the speed to the material and the abrasive being used.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003cp\u003eExcessive speed on aluminum or stainless steel generates \u003cstrong\u003eexcessive heat\u003c\/strong\u003e, which alters the workpiece and clogs the abrasive. Reducing the speed directly solves this problem.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003cp\u003eConversely, maximum speed remains useful for \u003cstrong\u003eaggressive grinding on steel\u003c\/strong\u003e or for accelerating material removal on thick beads.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eMaterial \/ Operation\u003c\/th\u003e\n\n      \u003cth\u003eRecommended speed\u003c\/th\u003e\n\n      \u003cth\u003eSuggested abrasive\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eSteel, weld grinding\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003e40-60 grit flap disc\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eStainless steel, finishing\u003c\/td\u003e\n\n      \u003ctd\u003eMedium to low\u003c\/td\u003e\n\n      \u003ctd\u003e80-120 grit flap disc\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eAluminum, deburring\u003c\/td\u003e\n\n      \u003ctd\u003eLow\u003c\/td\u003e\n\n      \u003ctd\u003e60 grit fiber disc, anti-clogging\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eSatin finishing \/ paint prep\u003c\/td\u003e\n\n      \u003ctd\u003eLow to medium\u003c\/td\u003e\n\n      \u003ctd\u003eNon-woven belt or disc\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis precise control reduces scrap, \u003cstrong\u003epreserves abrasive service life\u003c\/strong\u003e, and improves finishing quality without needing rework.\u003c\/p\u003e\u003ch2\u003eDynabrade 65750 vs. other electric grinders: comparative table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003eComparison of Dynabrade 65750, Dynabrade 65014, Dynabrade 65016, and 3M™ grinders\u003c\/h3\u003e\n\n\u003cp\u003eChoosing a \u003cstrong\u003evariable speed electric grinder\u003c\/strong\u003e depends primarily on the application, the power required, and the speed range. Here is a direct comparison to help you position the \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eBrand\u003c\/th\u003e\n\n      \u003cth\u003eVariable speed\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eMax. disc\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e65750\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade\u003c\/td\u003e\n\n      \u003ctd\u003eYes (2,000-6,500 rpm)\u003c\/td\u003e\n\n      \u003ctd\u003e1,200 W\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding, metal\/stainless finish\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e65014\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade\u003c\/td\u003e\n\n      \u003ctd\u003eNo (fixed speed)\u003c\/td\u003e\n\n      \u003ctd\u003e900 W\u003c\/td\u003e\n\n      \u003ctd\u003e115 mm\u003c\/td\u003e\n\n      \u003ctd\u003eSteel grinding, common use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e65016\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade\u003c\/td\u003e\n\n      \u003ctd\u003eNo (fixed speed)\u003c\/td\u003e\n\n      \u003ctd\u003e1,000 W\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eSteel grinding, boilermaking\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eElectric Grinder EG115\u003c\/td\u003e\n\n      \u003ctd\u003e3M™\u003c\/td\u003e\n\n      \u003ctd\u003eNo (fixed speed)\u003c\/td\u003e\n\n      \u003ctd\u003e850 W\u003c\/td\u003e\n\n      \u003ctd\u003e115 mm\u003c\/td\u003e\n\n      \u003ctd\u003eLight grinding, versatile workshop\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e65750 stands out with its variable speed\u003c\/strong\u003e, which is absent on the 65014 and 65016 models. This is a decisive advantage for working on \u003cstrong\u003estainless steel or heat-sensitive materials\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFixed-speed 3M™ grinders are suitable for simple repetitive tasks. As soon as the process requires \u003cstrong\u003eprecise control of the cutting speed\u003c\/strong\u003e, the Dynabrade 65750 takes the lead.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the 65750 for workshops that handle multiple material types and seek to reduce the risk of burning or surface deformation.\u003c\/p\u003e\u003ch2\u003eErgonomics, safety, and accessories compatible with the Dynabrade 65750\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e is designed for prolonged work sessions. Its compact body and careful balance reduce fatigue during long grinding operations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe integrated \u003cstrong\u003evariable speed\u003c\/strong\u003e allows the operator to adapt the power to the material being processed. Less vibration, fewer risks of overheating on sensitive surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eadjustable guard\u003c\/strong\u003e ensures optimal protection against sparks and debris. It is tool-less and repositionable, facilitating configuration changes in the workshop.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe speed control is accessible without changing your grip. A simple detail that, in intensive production, makes a real difference.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003ch3\u003eCompatible accessories\u003c\/h3\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFlap discs\u003c\/strong\u003e (40 to 120 grit) for deburring and finish sanding\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eCutting discs\u003c\/strong\u003e for clean cuts on steel and stainless steel\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDepressed center grinding wheels\u003c\/strong\u003e for work on curved surfaces\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eRotary wire brushes\u003c\/strong\u003e for stripping and surface preparation\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFiber discs\u003c\/strong\u003e with backing pad for rapid material removal\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAll these accessories meet the \u003cstrong\u003estandard 115 mm diameter\u003c\/strong\u003e compatible with the 65750. Always verify that the maximum speed of the accessory is greater than or equal to that of the machine.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer a selection of Dynabrade accessories directly compatible with this model to ensure optimal performance and the safety of your operators.\u003c\/p\u003e\u003ch2\u003eFAQ - Dynabrade 65750 Variable Speed Electric Grinder\u003c\/h2\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e1. What is the variable speed range of the Dynabrade 65750?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65750\u003c\/strong\u003e offers a variable speed range from \u003cstrong\u003e2,000 to 6,000 rpm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis electronic adjustment allows for precise adaptation of speed to the material being processed: low speed for heat-sensitive materials, high speed for aggressive roughing work.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What is the motor power of the Dynabrade 65750?\u003c\/h3\u003e\n\u003cp\u003eThe 65750 is equipped with a \u003cstrong\u003e900 W electric motor\u003c\/strong\u003e, powered by 230 V single-phase.\u003c\/p\u003e\n\u003cp\u003eThis power level ensures constant torque even under load, without a drop in RPM. It is a major asset for demanding industrial applications such as \u003cstrong\u003eweld grinding\u003c\/strong\u003e or dressing metal surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Which discs and accessories are compatible with the Dynabrade 65750?\u003c\/h3\u003e\n\u003cp\u003eThe machine accepts \u003cstrong\u003e125 mm depressed center discs\u003c\/strong\u003e (M14 mount).\u003c\/p\u003e\n\u003cp\u003eCompatible items include:\u003c\/p\u003e\n\u003cul\u003e\n\n  \u003cli\u003eFiber abrasive discs (zirconia, ceramic, aluminum oxide)\u003c\/li\u003e\n\n  \u003cli\u003eFlap discs for finishing and chamfering\u003c\/li\u003e\n\n  \u003cli\u003eCutting discs (metal, stainless steel)\u003c\/li\u003e\n\n  \u003cli\u003eWire cup brushes\u003c\/li\u003e\n\n  \u003cli\u003eSanding discs with backing pad\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eDynabrade offers a range of dedicated accessories directly compatible with this model.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Is the Dynabrade 65750 suitable for continuous production use?\u003c\/h3\u003e\n\u003cp\u003eYes. The 65750 is designed for an \u003cstrong\u003eintensive work cycle\u003c\/strong\u003e, typical of industrial production environments.\u003c\/p\u003e\n\u003cp\u003eIts optimized cooling motor limits heating during long sessions. It is perfectly suited for \u003cstrong\u003erepetitive grinding\u003c\/strong\u003e stations in boilermaking, industrial bodywork, or metal fabrication shops.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What is the difference between the Dynabrade 65750 and the Dynabrade 65014?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65014\u003c\/strong\u003e is a fixed-speed electric grinder without electronic regulation.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e65750 provides variable speed\u003c\/strong\u003e: this is the key difference. It targets operators who work on various materials in the same day (steel, stainless steel, aluminum, composites) and need to modulate the aggression of the abrasion without changing tools.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Can the Dynabrade 65750 be connected to a suction system?\u003c\/h3\u003e\n\u003cp\u003eThe Dynabrade 65750 does not natively include a centralized suction system.\u003c\/p\u003e\n\u003cp\u003eHowever, using an \u003cstrong\u003eadapted suction hood\u003c\/strong\u003e (M14 \/ 125 mm compatible) allows the machine to be connected to an industrial vacuum. At \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we can guide you toward the compatible collection accessories for this model to meet your \u003cstrong\u003eworkshop cleanliness and safety requirements\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"51 \/ 1220","offer_id":58488301388159,"sku":"DYNA_65753","price":19000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-electrique-a-vitesse-variable-dynabradeR-65750.jpg?v=1789990288"},{"product_id":"meuleuse-electrique-dynabrader-65014","title":"Dynabrade® 65014 Electric Grinder","description":"\u003ch2\u003eDynabrade 65014 electric grinder: technical datasheet and industrial applications\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade 65014 electric grinder\u003c\/strong\u003e is a 230 V straight grinder designed for workshops that do not compromise on reliability. \u003cstrong\u003eDeburring, grinding, weld finishing\u003c\/strong\u003e: it covers key operations without compromise.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e650 W constant-speed motor\u003c\/strong\u003e delivers a continuous 25,000 RPM, even under load. A decisive advantage on fast-paced production lines.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eSlim body, \u003cstrong\u003e1\/4\" spindle compatible with the entire Dynabrade ecosystem\u003c\/strong\u003e, industrial bearings: it is a tool built to last, not just for occasional repairs.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e is an official Dynabrade distributor. You order the exact manufacturer reference, with no middleman.\u003c\/p\u003e\u003ch2\u003ePresentation of the Dynabrade 65014 electric grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65014 electric grinder\u003c\/strong\u003e is a straight grinding tool designed for demanding industrial environments. It combines power, precision, and robustness in a compact format.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts electric motor delivers consistent performance, regardless of the pressure applied. This is a practical advantage on high-speed production lines.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt accepts \u003cstrong\u003estraight grinding wheels and mounted abrasives\u003c\/strong\u003e suitable for work on metals, welds, and hard surfaces. A versatile tool for deburring, grinding, and finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDynabrade: a benchmark manufacturer for industrial abrasive tools\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eDynabrade\u003c\/strong\u003e is an American manufacturer founded in 1969, specializing in pneumatic and electric abrasive tools. Its products equip aerospace, automotive, and boilermaking workshops worldwide.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe brand is recognized for the \u003cstrong\u003edurability of its mechanisms\u003c\/strong\u003e and the quality of its bearings. Operators appreciate the low vibration transmitted to the hand during long sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we are official distributors of the Dynabrade range. You get access to authentic products, with the exact manufacturer references.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eBrand: \u003cstrong\u003eDynabrade\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003ePart number: \u003cstrong\u003e65014\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eType: Electric straight grinder\u003c\/li\u003e\n\n  \u003cli\u003eApplications: deburring, grinding, finishing on metals\u003c\/li\u003e\n\n  \u003cli\u003eCompatibility: straight grinding wheels, mounted abrasives\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical specifications of the Dynabrade 65014\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65014\u003c\/strong\u003e is an \u003cstrong\u003eelectric straight grinder\u003c\/strong\u003e designed for demanding industrial applications. It operates on 230 V mains power and delivers power suitable for deburring, grinding, and metal finishing work.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e6 mm collet\u003c\/strong\u003e accepts a wide range of rotary accessories: carbide burrs, mounted points, brushes, and abrasive tools. The no-load speed reaches \u003cstrong\u003e25,000 RPM\u003c\/strong\u003e, making it a responsive tool for hard parts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe straight and compact body facilitates work in hard-to-reach areas. The grip remains stable even during prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230 V \/ 50 Hz\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eNo-load speed:\u003c\/strong\u003e 25,000 RPM\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eCollet:\u003c\/strong\u003e 6 mm\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric straight grinder\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Dynabrade\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eDrive type\u003c\/th\u003e\n\n      \u003cth\u003eSpeed (RPM)\u003c\/th\u003e\n\n      \u003cth\u003eCollet\u003c\/th\u003e\n\n      \u003cth\u003eTypical usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade 65014\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eElectric 230 V\u003c\/td\u003e\n\n      \u003ctd\u003e25,000\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, metal grinding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade 52614\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n      \u003ctd\u003e25,000\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, ATEX zones\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GGS 28 C\u003c\/td\u003e\n\n      \u003ctd\u003eElectric 230 V\u003c\/td\u003e\n\n      \u003ctd\u003e28,000\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding, polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita GD0601\u003c\/td\u003e\n\n      \u003ctd\u003eElectric 230 V\u003c\/td\u003e\n\n      \u003ctd\u003e25,000\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, light work\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eUnlike pneumatic models such as the \u003cstrong\u003eDynabrade 52614\u003c\/strong\u003e, the 65014 does not require a compressor. It is used directly on a mains socket, simplifying implementation on job sites or in workshops not equipped with compressed air.\u003c\/p\u003e\n\u003ch2\u003eIndustrial applications: grinding, deburring, welding, and surface finishing\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65014\u003c\/strong\u003e is an electric grinder designed for demanding industrial environments. It covers a wide range of operations: metal grinding, machining part deburring, material removal, and surface finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts electric motor delivers stable power, suitable for prolonged work in workshops or on production lines. No compressor required, no pressure drop: performance remains constant.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eGrinding\u003c\/strong\u003e: material removal on steel, stainless steel, aluminum\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDeburring\u003c\/strong\u003e: cleaning edges after cutting or milling\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSurface finishing\u003c\/strong\u003e: preparation before painting, coating, or welding\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWeld work\u003c\/strong\u003e: flush grinding, reworking, and smoothing beads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u0026gt;\u0026gt;\u003ch3\u003eWeld preparation and removal with the Dynabrade 65014\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWeld removal requires a machine that is both precise and powerful. The \u003cstrong\u003eDynabrade 65014\u003c\/strong\u003e meets this requirement thanks to its controlled speed and torque available from the start.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt allows for flush grinding of a weld bead without burning the surface or creating weak points. Result: a flat surface, ready for inspection or finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend this grinder for boilermakers, welders, and fitters looking for reliability and repeatability in every operation.\u003c\/p\u003e\n\u003ch2\u003eComparison: Dynabrade 65014 against other electric grinders on the market\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65014\u003c\/strong\u003e is a 230 V electric straight grinder, designed for precision workshop work. Let's see how it positions itself against its direct competitors.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e650 W\u003c\/strong\u003e motor and \u003cstrong\u003e25,000 RPM\u003c\/strong\u003e speed place it in an intermediate category: more powerful than a light finishing grinder, but more manageable than a heavy routing model.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eBrand\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eSpeed (RPM)\u003c\/th\u003e\n\n      \u003cth\u003eSpindle\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e65014\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade\u003c\/td\u003e\n\n      \u003ctd\u003e650 W\u003c\/td\u003e\n\n      \u003ctd\u003e25,000\u003c\/td\u003e\n\n      \u003ctd\u003e1\/4\" (6.35 mm)\u003c\/td\u003e\n\n      \u003ctd\u003ePrecision grinding, deburring, metal finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGGS 28 LCE\u003c\/td\u003e\n\n      \u003ctd\u003eBosch Professional\u003c\/td\u003e\n\n      \u003ctd\u003e650 W\u003c\/td\u003e\n\n      \u003ctd\u003e28,000\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral grinding, rotary tooling\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGE 10\u003c\/td\u003e\n\n      \u003ctd\u003eMetabo\u003c\/td\u003e\n\n      \u003ctd\u003e710 W\u003c\/td\u003e\n\n      \u003ctd\u003e35,000\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive work, steel grinding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDGM50\u003c\/td\u003e\n\n      \u003ctd\u003eMakita\u003c\/td\u003e\n\n      \u003ctd\u003e710 W\u003c\/td\u003e\n\n      \u003ctd\u003e30,000\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile grinding, industrial use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe 65014 stands out with its \u003cstrong\u003eAmerican 1\/4\" spindle\u003c\/strong\u003e, a standard in Dynabrade industrial environments. It ensures direct compatibility with the entire Dynabrade accessory range.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the Bosch GGS 28 LCE, the 65014 spins slightly slower but offers \u003cstrong\u003ebetter ergonomics in prolonged use\u003c\/strong\u003e thanks to its slim body and mastered balance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the 710 W Metabo or Makita models, it remains lighter in hand. Ideal for \u003cstrong\u003erepetitive finishing operations\u003c\/strong\u003e on metal parts, welds, or deburring in production.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the 65014 for workshops looking for reliability, precision, and compatibility with the Dynabrade ecosystem.\u003c\/p\u003e\n\u003ch2\u003eErgonomics, safety, and durability: the advantages of the Dynabrade 65014\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65014\u003c\/strong\u003e is designed for operators who work for long periods in constrained positions. Its \u003cstrong\u003ecompact and well-balanced body\u003c\/strong\u003e reduces muscle fatigue, even during prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe handle is designed to provide a firm grip without cramping. The center of gravity is placed low, which improves tool control on the part.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegarding safety, the \u003cstrong\u003erobust wheel guard\u003c\/strong\u003e is adjustable and stays firmly in place under vibration. Dynabrade also integrates a soft-start system that prevents jolts during startup, a real plus for protecting both the operator and the workpiece.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eelectric motor\u003c\/strong\u003e of the 65014 is designed to handle intensive cycles. The carbon brushes are accessible and replaceable without complete disassembly, which significantly extends the tool's lifespan.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eindustrial-grade ball bearings\u003c\/strong\u003e absorb radial stresses related to aggressive grinding. Result: less premature wear, fewer unplanned production line stops.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eControlled weight\u003c\/strong\u003e to limit operator fatigue\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eIntegrated soft start\u003c\/strong\u003e\n\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAdjustable and secure wheel guard\u003c\/strong\u003e\n\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eCarbon brushes replaceable\u003c\/strong\u003e in the workshop without specific tools\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eIndustrial bearings\u003c\/strong\u003e adapted to high loads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we select tools that last. The 65014 meets this requirement: it is a production tool, not a repair tool.\u003c\/p\u003e\n\u003ch2\u003eFAQ - Dynabrade 65014 electric grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the rotation speed of the Dynabrade 65014?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 65014\u003c\/strong\u003e spins at \u003cstrong\u003e25,000 RPM\u003c\/strong\u003e at no-load. This is a speed suitable for intensive grinding work on metals and welds.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What disc should be used with the Dynabrade 65014?\u003c\/h3\u003e\n\u003cp\u003eIt accepts \u003cstrong\u003e125 mm grinding discs\u003c\/strong\u003e (M14). It is commonly used with abrasive discs for steel, stainless steel, or cast iron.\u003c\/p\u003e\n\u003cp\u003eFor stainless steel, favor iron- and sulfur-free discs to avoid any surface contamination.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is the 65014 suitable for continuous use in a workshop?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003cstrong\u003eDynabrade electric motor\u003c\/strong\u003e is designed for prolonged work cycles. It is a tool tailored for demanding industrial environments, not for occasional use.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend it particularly for high-cadence workstations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What is the power of the Dynabrade 65014 motor?\u003c\/h3\u003e\n\u003cp\u003eThe 65014 is equipped with a \u003cstrong\u003e650 W motor\u003c\/strong\u003e. This power level allows it to attack thick weld beads or large burrs without loss of RPM.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Is the Dynabrade 65014 compatible with a vacuum system?\u003c\/h3\u003e\n\u003cp\u003eNo, this grinder is not designed to be connected to a centralized vacuum. For environments where \u003cstrong\u003edust management\u003c\/strong\u003e is critical, Dynabrade offers other models with an integrated vacuum shroud.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. What is the difference from the Dynabrade 65015?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e65015\u003c\/strong\u003e is the variable-speed version, whereas the 65014 runs at a fixed speed. If your process requires adapting the speed according to the material or finish, the 65015 is more versatile.\u003c\/p\u003e\n\u003cp\u003eFor standardized use on a single type of part, the \u003cstrong\u003e65014 remains the simplest and most robust choice\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"51 \/ 914","offer_id":58488301683071,"sku":"DYNA_65014","price":8446.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-electrique-dynabradeR-65014.jpg?v=1789990289"},{"product_id":"meuleuse-de-poste-a-outils-electrique-dynabrader-64993","title":"Dynabrade® 64993 Electric Tool Post Grinder","description":"\u003ch2\u003eDynabrade 64993 Electric Tool Post Grinder: Data Sheet and Applications\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eFor workshops involved in \u003cstrong\u003emetal series production\u003c\/strong\u003e, portable grinders quickly show their limitations. The \u003cstrong\u003eDynabrade 64993 electric tool post grinder\u003c\/strong\u003e meets a different need: precision, repeatability, and endurance in continuous production.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eMounted on a fixed station, it frees both of the operator's hands and ensures a \u003cstrong\u003econstant speed\u003c\/strong\u003e for every pass, grinding, deburring, or finishing on steel, stainless steel, or aluminum.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eDynabrade\u003c\/strong\u003e has been designing tools for heavy industry since 1969. The 64993 is a direct illustration of this: robust, reliable, and built to last.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official Dynabrade distributor, you will find this model, along with access to \u003cstrong\u003espare parts\u003c\/strong\u003e and technical advice on integrating it into your workstation.\u003c\/p\u003e\u003ch2\u003eOverview of the Dynabrade 64993 Electric Grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 64993 electric tool post grinder\u003c\/strong\u003e is designed for demanding industrial environments. It offers power and precision tailored for repetitive grinding operations in the workshop.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis model is particularly appreciated for its robustness and ease of integration into a \u003cstrong\u003efixed workstation\u003c\/strong\u003e. It is suitable for finishing, deburring, and grinding applications on metal.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDynabrade: A benchmark manufacturer for industrial abrasive tools\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eDynabrade\u003c\/strong\u003e is an American manufacturer founded in 1969, recognized globally for its precision abrasive tools. The brand equips workshops in the aerospace, automotive, and metalworking industries.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eTheir philosophy is based on a simple principle: designing tools that \u003cstrong\u003ereduce operator fatigue\u003c\/strong\u003e while maximizing productivity. The 64993 is fully in line with this logic.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt Dagobert Industrie, we stock Dynabrade products for their \u003cstrong\u003efield reliability\u003c\/strong\u003e and the availability of spare parts. This is a guarantee of long-term durability.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl--\u003cul\u003e\n  \u003cli\u003eBrand: \u003cstrong\u003eDynabrade\u003c\/strong\u003e\n\n\u003c\/li\u003e\n  \u003cli\u003eType: Electric tool post grinder\u003c\/li\u003e\n  \u003cli\u003eUsage: Fixed industrial workshop\u003c\/li\u003e\n  \u003cli\u003eApplications: Grinding, deburring, metal finishing\u003c\/li\u003e\n  \u003cli\u003eTarget sectors: Metalworking, automotive, aerospace\u003c\/li\u003e\n\n\u003ch2\u003eTechnical specifications of the Dynabrade 64993\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 64993\u003c\/strong\u003e is an \u003cstrong\u003eelectric tool post grinder\u003c\/strong\u003e designed for demanding industrial environments. It integrates directly into a fixed workstation.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts electric motor delivers power suited for \u003cstrong\u003egrinding, deburring, and finishing work on metals\u003c\/strong\u003e. The tool post design ensures consistent, repeatable motions and reduces operator fatigue.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the main technical specifications:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eType:\u003c\/strong\u003e Electric tool post grinder\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Dynabrade\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eReference:\u003c\/strong\u003e 64993\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Electric\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Grinding, deburring, finishing on metal parts\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Fixed station\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eMounting it on a station allows the operator to work on the part with both hands free. This is a concrete advantage for series operations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003eDynabrade 64993\u003c\/th\u003e\n\n      \u003cth\u003ePneumatic Tool Post Grinder (e.g., Dynabrade air series)\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePower Source\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eElectric\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eCompressed air\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n\n      \u003ctd\u003eFixed station\u003c\/td\u003e\n\n      \u003ctd\u003eFixed station\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMaintenance\u003c\/td\u003e\n\n      \u003ctd\u003eLow\u003c\/td\u003e\n\n      \u003ctd\u003eRequires air network\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMain Usage\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, metal finishing\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, metal finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRepeatability\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the 64993 for workshops that want to eliminate the need for a compressed air network while maintaining the benefits of a \u003cstrong\u003eDynabrade tool post solution\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eIndustrial applications: welding, metalworking, and surface finishing\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 64993\u003c\/strong\u003e is designed for demanding industrial environments. It naturally integrates into fixed workstations dedicated to \u003cstrong\u003emetalworking\u003c\/strong\u003e, finishing, and surface treatment.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts stationary electric motor offers stable and continuous power, suited for repetitive workshop tasks. No compressor to manage, no pressure drops: the machine delivers a \u003cstrong\u003econstant speed\u003c\/strong\u003e with every use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003ePreparation and weld removal with the 64993\u003c\/h3\u003e\n\n\u003cp\u003eThe 64993 reveals its full potential in \u003cstrong\u003eweld grinding\u003c\/strong\u003e. It allows for the removal of weld beads, spatter, and burrs immediately after welding.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eOperators use it primarily to:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDeburr and smooth MIG\/MAG and TIG weld beads\u003c\/strong\u003e on steel, stainless steel, and aluminum\u003c\/li\u003e\n\n  \u003cli\u003eEliminate \u003cstrong\u003eweld spatter\u003c\/strong\u003e on finished parts\u003c\/li\u003e\n\n  \u003cli\u003ePrepare surfaces before re-welding or applying a coating\u003c\/li\u003e\n\n  \u003cli\u003ePerform \u003cstrong\u003esurface finishing\u003c\/strong\u003e passes after coarse grinding\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe geometry of the tool post grinder facilitates work on parts held in a vise or jig. It frees both of the operator's hands for \u003cstrong\u003eprecise positioning\u003c\/strong\u003e of the workpiece.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe result: higher production rates, \u003cstrong\u003ereproducible finishing quality\u003c\/strong\u003e, and reduced operator fatigue compared to a standard portable grinder.\u003c\/p\u003e\n\u003ch2\u003eComparison: Dynabrade 64993 versus other electric tool post grinders\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 64993\u003c\/strong\u003e is an electric tool post grinder designed for demanding industrial environments. It stands out for its robustness and precision in \u003cstrong\u003egrinding, deburring, and finishing\u003c\/strong\u003e operations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to competing references such as the \u003cstrong\u003eBosch GWS 7-115\u003c\/strong\u003e or the \u003cstrong\u003eMetabo WE 9-125 Quick\u003c\/strong\u003e, the 64993 is clearly positioned for \u003cstrong\u003estationary use at a workstation\u003c\/strong\u003e, where portable grinders remain versatile but less suitable tools.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eMain Usage\u003c\/th\u003e\n\n      \u003cth\u003eFixed Station Mounting\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade 64993\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eElectric Tool Post\u003c\/td\u003e\n\n      \u003ctd\u003ePer data sheet\u003c\/td\u003e\n\n      \u003ctd\u003eDeburring, industrial finishing\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Yes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GWS 7-115\u003c\/td\u003e\n\n      \u003ctd\u003ePortable Grinder\u003c\/td\u003e\n\n      \u003ctd\u003e720 W\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral grinding\u003c\/td\u003e\n\n      \u003ctd\u003e✘ No\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMetabo WE 9-125 Quick\u003c\/td\u003e\n\n      \u003ctd\u003ePortable Grinder\u003c\/td\u003e\n\n      \u003ctd\u003e900 W\u003c\/td\u003e\n\n      \u003ctd\u003eSteel, stainless steel grinding\u003c\/td\u003e\n\n      \u003ctd\u003e✘ No\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade 52614\u003c\/td\u003e\n\n      \u003ctd\u003eElectric Tool Post\u003c\/td\u003e\n\n      \u003ctd\u003ePer data sheet\u003c\/td\u003e\n\n      \u003ctd\u003eMetal finishing, deburring\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Yes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe main advantage of the \u003cstrong\u003e64993 over portable grinders\u003c\/strong\u003e: ergonomics designed for repetitive work at a fixed station. The operator brings the part to the tool, not the other way around.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to other Dynabrade models like the \u003cstrong\u003e52614\u003c\/strong\u003e, the 64993 targets a specific segment. At \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we advise verifying compatibility with your existing station before choosing between the two references.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e✔ Ideal for \u003cstrong\u003ehigh-rate production lines\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003e✔ Designed for \u003cstrong\u003efixed and stable\u003c\/strong\u003e mounting\n\n\u003c\/li\u003e\n\n  \u003cli\u003e✔ \u003cstrong\u003eDynabrade\u003c\/strong\u003e brand, recognized for durability in industrial environments\u003c\/li\u003e\n\n  \u003cli\u003e✘ Less suitable for \u003cstrong\u003emobile on-site\u003c\/strong\u003e interventions\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eErgonomics, safety, and source capture: the strengths of the Dynabrade tool post solution\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade 64993\u003c\/strong\u003e is designed for fixed station use. The tool remains suspended or mounted on its support, which frees the operator's hands between each pass.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis \u003cstrong\u003etool post\u003c\/strong\u003e concept reduces muscular fatigue during long runs. Less repetitive handling means less strain on wrists and shoulders.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eDust capture at the source\u003c\/strong\u003e is integrated into the design. The grinder connects directly to a centralized extraction system or a suitable industrial vacuum cleaner. Particles are captured as close to the grinding zone as possible.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis is a decisive factor for workshops subject to air quality standards. Less airborne dust means a healthier work environment and easier compliance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegarding safety, the \u003cstrong\u003eelectric motor\u003c\/strong\u003e provides a constant speed regardless of the load. No speed drop, no overheating related to poor compressed air supply, a concrete advantage over pneumatic models in poorly equipped workshops.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this model to workshops looking to standardize their finishing stations and ensure reliable production rates. The 64993 fits into a strategy of rigorous organization for fixed-part processing.\u003c\/p\u003e\n\u003ch2\u003eFAQ - Dynabrade 64993 Electric Tool Post Grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What exactly is the Dynabrade 64993 electric tool post grinder used for?\u003c\/h3\u003e\n\u003cp\u003eThe Dynabrade 64993 is a \u003cstrong\u003efixed electric tool post grinder\u003c\/strong\u003e, designed to be integrated into an industrial workstation.\u003c\/p\u003e\n\u003cp\u003eIt is used for \u003cstrong\u003egrinding, deburring, and sharpening\u003c\/strong\u003e operations on metal parts or other materials, in a precise and repetitive manner.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What is the difference between a tool post grinder and a portable grinder?\u003c\/h3\u003e\n\u003cp\u003eA portable grinder moves with the operator. A \u003cstrong\u003etool post grinder\u003c\/strong\u003e is fixed to a workbench or support: the workpiece is brought to the tool, not the other way around.\u003c\/p\u003e\n\u003cp\u003eThis provides greater \u003cstrong\u003estability, repeatability, and safety\u003c\/strong\u003e for high-rate production cycles.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is this model suitable for continuous production use?\u003c\/h3\u003e\n\u003cp\u003eYes. Dynabrade designs its tool post grinders for \u003cstrong\u003eintensive industrial use\u003c\/strong\u003e. The 64993 is built for prolonged work cycles without excessive overheating.\u003c\/p\u003e\n\u003cp\u003eThis is a key strength of the brand: robust machines intended for \u003cstrong\u003eworkshop environments\u003c\/strong\u003e, not occasional use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What accessories can be mounted on the Dynabrade 64993?\u003c\/h3\u003e\n\u003cp\u003eIt accepts \u003cstrong\u003egrinding wheels, abrasive discs, and brushes\u003c\/strong\u003e compatible with its spindle and rotation speed. Always verify that the accessory is certified for the \u003cstrong\u003emaximum peripheral speed\u003c\/strong\u003e indicated on the machine.\u003c\/p\u003e\n\u003cp\u003eAt Dagobert Industrie, we offer a selection of accessories compatible with Dynabrade grinders.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Does this model require a special electrical installation?\u003c\/h3\u003e\n\u003cp\u003eThe 64993 operates on \u003cstrong\u003estandard mains electricity\u003c\/strong\u003e. Check the required voltage and frequency in the technical data sheet before any commissioning.\u003c\/p\u003e\n\u003cp\u003eConnection to a \u003cstrong\u003ededicated circuit with a residual-current device (RCD)\u003c\/strong\u003e is recommended for this type of fixed machine.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. How do I maintain the Dynabrade 64993 to extend its service life?\u003c\/h3\u003e\n\u003cp\u003eRegularly clean the machine to prevent the accumulation of \u003cstrong\u003eabrasive dust\u003c\/strong\u003e inside the motor. Check the condition of the brushes and replace them as soon as they are worn.\u003c\/p\u003e\n\u003cp\u003eSimple preventive maintenance is enough to maintain \u003cstrong\u003eoriginal performance\u003c\/strong\u003e over the long term.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"51 \/ 914","offer_id":58488298897791,"sku":"DYNA_64993","price":14600.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-de-poste-a-outils-electrique-dynabradeR-64993.jpg?v=1789990291"},{"product_id":"polisseuse-sans-fil-flex-pxe-80","title":"FLEX PXE 80 Cordless Polisher","description":"\u003ch2\u003eFLEX PXE 80 cordless polisher: the 12V mini rotary and random orbital polisher for automotive detailing\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eFLEX PXE 80\u003c\/strong\u003e is a \u003cstrong\u003e12V cordless mini-polisher\u003c\/strong\u003e that combines rotary and random orbital modes in a compact format, tailored for \u003cstrong\u003eautomotive detailing\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt reaches difficult areas, pillars, side mirrors, small surfaces, where a standard polisher cannot fit.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eLightweight and maneuverable, it is suitable for both \u003cstrong\u003ecorrection polishing\u003c\/strong\u003e and the application of waxes and sealants.\u003c\/p\u003e\u003ch2\u003eIntroducing the FLEX PXE 80: design and onboard technology\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFLEX PXE 80\u003c\/strong\u003e is a \u003cstrong\u003e12V cordless mini-polisher\u003c\/strong\u003e designed specifically for \u003cstrong\u003eautomotive detailing\u003c\/strong\u003e. Its compact format and light weight make it a precision tool, ideal for hard-to-reach areas.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt accepts \u003cstrong\u003e75 to 80 mm\u003c\/strong\u003e backing plates, where large polishers cannot go: headlight contours, mirrors, side skirts, door handles.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eBrushless motor and dual rotary \/ random orbital mode\u003c\/h3\u003e\n\n\u003cp\u003eThe PXE 80's \u003cstrong\u003ebrushless motor\u003c\/strong\u003e delivers constant torque without energy loss due to friction. No brushes to replace, and a significantly longer lifespan than a conventional brushed motor.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe major advantage: it operates in \u003cstrong\u003erotary mode\u003c\/strong\u003e for aggressive work (paint correction, deep scratch removal) and in \u003cstrong\u003erandom orbital mode\u003c\/strong\u003e for a smooth finish with no risk of burn-through.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis \u003cstrong\u003edual mode\u003c\/strong\u003e can be selected directly on the machine. A single tool replaces two separate polishers on small surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eVoltage: \u003cstrong\u003e12 V\u003c\/strong\u003e (Li-Ion battery)\u003c\/li\u003e\n\n  \u003cli\u003eCompatible backing plate: \u003cstrong\u003e75-80 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eModes: \u003cstrong\u003erotary and random orbital\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eMotor: \u003cstrong\u003ebrushless\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWeight: ultra-compact, maximum maneuverability\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the FLEX PXE 80 to detailing professionals and body shops looking for a reliable tool for precision touch-ups.\u003c\/p\u003e\u003ch2\u003eDetailed technical specifications of the FLEX PXE 80 12-EC\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFLEX PXE 80 12-EC\u003c\/strong\u003e is a compact \u003cstrong\u003e12V cordless polisher\u003c\/strong\u003e designed for work on small surfaces and hard-to-reach areas. It operates in \u003cstrong\u003erotary and random orbital\u003c\/strong\u003e modes, making it versatile for both paint correction and wax application.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e80 mm backing plate\u003c\/strong\u003e distinguishes it from standard 125 or 150 mm polishers. It reaches door pillars, mirror housings, trim strips, and tight areas effortlessly.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the main technical specifications:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eVoltage: \u003cstrong\u003e12 V (Li-Ion battery)\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eBacking plate diameter: \u003cstrong\u003e80 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWorking mode: \u003cstrong\u003erotary + random orbital\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eElectronically adjustable variable speed\u003c\/li\u003e\n\n  \u003cli\u003eReduced weight for prolonged use without fatigue\u003c\/li\u003e\n\n  \u003cli\u003ePlate attachment: \u003cstrong\u003eVelcro (hook and loop)\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the \u003cstrong\u003eRupes iBrid Nano\u003c\/strong\u003e, the PXE 80 offers a slightly larger plate (80 vs 75 mm) and fits into the \u003cstrong\u003eFLEX 12 V\u003c\/strong\u003e battery ecosystem, compatible with other tools in the range.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is a \u003cstrong\u003eprecision tool first and foremost\u003c\/strong\u003e: it does not replace a 150 mm polisher on hoods and roofs, but it excels where large machines cannot fit.\u003c\/p\u003e\u003ch2\u003eComparison: the FLEX PXE 80 versus other cordless polishers on the market\u003c\/h2\u003e\u003cbr\u003e\n\nThe \u003cstrong\u003eFLEX PXE 80\u003c\/strong\u003e stands out due to its dual function: it works in both \u003cstrong\u003erotary and random orbital\u003c\/strong\u003e modes, whereas most of its competitors are limited to one or the other.\n\n\u003cbr\u003e\n\nIts \u003cstrong\u003e80 mm\u003c\/strong\u003e plate positions it in a very specific segment: tight areas, mirrors, bumpers, rims. This is a niche that classic 125 or 150 mm polishers do not cover well.\n\n\u003cbr\u003e\n\n\u003ch3\u003eComparison table, FLEX PXE 80 vs competitors (Einhell, RYOBI, DongCheng…)\u003c\/h3\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePlate\u003c\/th\u003e\n\n      \u003cth\u003eMode\u003c\/th\u003e\n\n      \u003cth\u003eVoltage\u003c\/th\u003e\n\n      \u003cth\u003eMax speed\u003c\/th\u003e\n\n      \u003cth\u003eWeight (without battery)\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFLEX PXE 80\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e80 mm\u003c\/td\u003e\n\n      \u003ctd\u003eRotary + random orbital\u003c\/td\u003e\n\n      \u003ctd\u003e12 V\u003c\/td\u003e\n\n      \u003ctd\u003e3,800 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e~0.9 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRYOBI RBP18-120B\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital only\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e3,500 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.3 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eEinhell TE-PO 18\/100 Li\u003c\/td\u003e\n\n      \u003ctd\u003e100 mm\u003c\/td\u003e\n\n      \u003ctd\u003eRotary only\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e3,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.1 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDongCheng DCPJ20\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eRotary only\u003c\/td\u003e\n\n      \u003ctd\u003e20 V\u003c\/td\u003e\n\n      \u003ctd\u003e2,800 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.2 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\nThe PXE 80 is the \u003cstrong\u003elightest and most compact\u003c\/strong\u003e in this comparison. In return, it operates on \u003cstrong\u003e12 V\u003c\/strong\u003e: the runtime is suitable for small areas, not entire car bodies.\n\n\u003cbr\u003e\n\n18 V or 20 V models offer more endurance on large surfaces, but none offer an \u003cstrong\u003e80 mm plate\u003c\/strong\u003e. For \u003cstrong\u003eprecision detailing\u003c\/strong\u003e, the FLEX PXE 80 has no real direct equivalent in this segment.\u003ch2\u003eApplications and areas of use for the FLEX PXE 80\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFLEX PXE 80\u003c\/strong\u003e is designed for \u003cstrong\u003eautomotive detailing\u003c\/strong\u003e in hard-to-reach areas. Its 80 mm head makes it ideal where a large polisher simply will not fit.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt operates in \u003cstrong\u003erotary and random orbital\u003c\/strong\u003e mode, allowing it to cover a wide spectrum of operations: from fast paint removal to refined finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the main uses:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003ePaint correction\u003c\/strong\u003e on mirrors, door handles, A\/B\/C pillars\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eFinishing polish\u003c\/strong\u003e on small panels and curved areas\u003c\/li\u003e\n\n  \u003cli\u003eRemoval of \u003cstrong\u003elight scratches and swirls\u003c\/strong\u003e on the bodywork\u003c\/li\u003e\n\n  \u003cli\u003eApplication and buffing of \u003cstrong\u003ewaxes and sealants\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWork on \u003cstrong\u003epolycarbonate headlights\u003c\/strong\u003e to restore clarity\u003c\/li\u003e\n\n  \u003cli\u003ePolishing of \u003cstrong\u003epainted or lacquered rims\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eTouch-ups on \u003cstrong\u003echrome trim and glossy plastics\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e12 V cordless battery\u003c\/strong\u003e removes the constraint of a power cord. You can move freely around the vehicle without worrying about an outlet or an extension cord.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is intended for both \u003cstrong\u003eprofessional automotive detailers\u003c\/strong\u003e and detailing enthusiasts demanding the best for their own cars.\u003c\/p\u003e\u003ch2\u003eUsage and maintenance tips for the FLEX PXE 80 cordless polisher\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFLEX PXE 80\u003c\/strong\u003e is a compact 12 V polisher used in rotary or random orbital mode. Before starting, choose the correct plate and pad according to the intended operation.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor \u003cstrong\u003epaint correction\u003c\/strong\u003e, start with a cutting pad and abrasive polish. Reduce the speed and increase it gradually depending on the surface resistance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn \u003cstrong\u003erandom orbital mode\u003c\/strong\u003e, the risk of burn-through on the paint is almost zero. It is the ideal mode for beginners or for working on sensitive areas.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAlways work on a \u003cstrong\u003eclean and decontaminated surface\u003c\/strong\u003e. A grain of dust or sand under the pad can scratch the paint before you have even corrected anything.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eApply light and even pressure. Let the machine do the work, forcing it does not improve the result; it wears out the pad and heats the lacquer unnecessarily.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAfter each session, \u003cstrong\u003eclean the pads\u003c\/strong\u003e with lukewarm water or a specific cleaner. A pad clogged with dried polish distributes product poorly and loses efficiency.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWipe the machine body with a slightly damp cloth. Never use solvents on the plastic housing or the 12 V battery.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eStore the \u003cstrong\u003ePXE 80\u003c\/strong\u003e with the battery partially charged (between 40 and 60%) if it will remain unused for several weeks. This extends the life of the lithium-ion cells.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegularly check the condition of the \u003cstrong\u003ebacking plate\u003c\/strong\u003e: a warped or worn plate creates excessive vibrations and compromises the quality of the polishing.\u003c\/p\u003e\u003ch2\u003eFAQ - FLEX PXE 80\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between rotary mode and random orbital mode on the FLEX PXE 80?\u003c\/h3\u003e\n\u003cp\u003eIn \u003cstrong\u003epure rotary mode\u003c\/strong\u003e, the plate rotates on its axis: ideal for correcting marked defects or polishing flat surfaces.\u003c\/p\u003e\n\u003cp\u003eIn \u003cstrong\u003erandom orbital mode\u003c\/strong\u003e, the orbital movement reduces the risk of paint burn-through. This is the recommended mode for finishes and waxes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. Is the FLEX PXE 80 suitable for small spaces?\u003c\/h3\u003e\n\u003cp\u003eYes. Its \u003cstrong\u003e80 mm\u003c\/strong\u003e plate is designed for hard-to-reach areas: door handles, mirrors, windshield pillars, trim strips.\u003c\/p\u003e\n\u003cp\u003eFor large surfaces (hood, roof), a 125 mm or 150 mm plate polisher will be more productive.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. What battery does the FLEX PXE 80 use?\u003c\/h3\u003e\n\u003cp\u003eIt operates with \u003cstrong\u003eFLEX 12 V\u003c\/strong\u003e batteries from the Combi range. A battery and charger are generally included depending on the kit chosen.\u003c\/p\u003e\n\u003cp\u003eThe battery life is sufficient for a complete treatment of a compact vehicle, provided you work by section.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Can any polishing pad be used with the PXE 80?\u003c\/h3\u003e\n\u003cp\u003eNo. You need pads compatible with an \u003cstrong\u003e80 mm\u003c\/strong\u003e plate, secured by Velcro. Standard 125 mm or 150 mm pads are not suitable.\u003c\/p\u003e\n\u003cp\u003eFLEX offers specific foam and microfiber pads: correction, finishing, polishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Does the FLEX PXE 80 replace a corded polisher for professional use?\u003c\/h3\u003e\n\u003cp\u003eFor intensive daily work on large surfaces, a \u003cstrong\u003e230 V corded\u003c\/strong\u003e polisher remains more enduring.\u003c\/p\u003e\n\u003cp\u003eHowever, the cordless PXE 80 excels at \u003cstrong\u003espot touch-ups\u003c\/strong\u003e, small areas, and mobile interventions where a cable is a real constraint.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. What level of experience is required to use the FLEX PXE 80?\u003c\/h3\u003e\n\u003cp\u003eThe random orbital mode is \u003cstrong\u003eaccessible to beginners\u003c\/strong\u003e: the risk of burning the paint is low.\u003c\/p\u003e\n\u003cp\u003eThe rotary mode requires a bit more skill. You must control the pressure and the passage time, especially on thin clear coats or dark colors.\u003c\/p\u003e","brand":"Flex","offers":[{"title":"Default Title","offer_id":58480346235263,"sku":"FLEX_469076","price":479.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/polisseuse-sans-fil-flex-pxe-80.jpg?v=1789990317"},{"product_id":"polisseuse-roto-orbitale-dynabrader-nitro-db8e","title":"Dynabrade® NITRO DB8E Dual Action Polisher","description":"\u003ch2\u003eDynabrade® NITRO DB8E random orbital polisher: performance and precision for professional finishing\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DB8E random orbital polisher\u003c\/strong\u003e is designed for professionals who demand an \u003cstrong\u003eimpeccable finish\u003c\/strong\u003e without compromising on productivity.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003erandom orbital\u003c\/strong\u003e motion combines speed and smoothness for a uniform result on bodywork, composites, or metal.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRobust, balanced, and precise, it stands out as a benchmark tool for \u003cstrong\u003esurface preparation\u003c\/strong\u003e and \u003cstrong\u003eprofessional polishing\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003ePresentation of the Dynabrade® NITRO DB8E: electric random orbital technology\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DB8E\u003c\/strong\u003e is an electric random orbital polisher designed for automotive and industrial finishing professionals. It combines simultaneous rotation and orbit for a uniform result, free of marks and micro-scratches.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003erandom orbital motion\u003c\/strong\u003e sets it apart from traditional rotary polishers: the combined action reduces heat generated on the surface and limits the risk of burning the paint. Ideal for sensitive surfaces or fragile clear coats.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith a \u003cstrong\u003e150 mm backing pad\u003c\/strong\u003e, the DB8E effectively covers large areas while remaining maneuverable on curved zones. The handling is intuitive, reducing operator fatigue during long sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eThe Dynabrade® NITRO range: a series designed for professional requirements\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO\u003c\/strong\u003e range brings together Dynabrade®'s high-end electric tools. It meets the needs of body shop technicians, automotive detailers, and industrial finishers who work daily in demanding conditions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eNITRO machines share a robust design, \u003cstrong\u003eadvanced control electronics\u003c\/strong\u003e, and careful ergonomics. The DB8E is its flagship model for \u003cstrong\u003epaint correction and buffing\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this machine to professionals who do not compromise on finishing quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003eDynabrade® NITRO DB8E\u003c\/th\u003e\n\n      \u003cth\u003eRupes LHR 15 Mark III\u003c\/th\u003e\n\n      \u003cth\u003eFestool SHINEX RAP 150\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMotion type\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eRandom orbital\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePad diameter\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePower source\u003c\/td\u003e\n\n      \u003ctd\u003eElectric corded\u003c\/td\u003e\n\n      \u003ctd\u003eElectric corded\u003c\/td\u003e\n\n      \u003ctd\u003eElectric corded\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMain use\u003c\/td\u003e\n\n      \u003ctd\u003ePaint correction, buffing\u003c\/td\u003e\n\n      \u003ctd\u003ePolishing, finishing\u003c\/td\u003e\n\n      \u003ctd\u003eSanding, finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eSpeed control\u003c\/td\u003e\n\n      \u003ctd\u003eElectronic\u003c\/td\u003e\n\n      \u003ctd\u003eElectronic\u003c\/td\u003e\n\n      \u003ctd\u003eElectronic\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eTarget audience\u003c\/td\u003e\n\n      \u003ctd\u003ePro body shop, industry\u003c\/td\u003e\n\n      \u003ctd\u003eDetailing, body shop\u003c\/td\u003e\n\n      \u003ctd\u003eWoodworking, body shop\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eTechnical specifications of the NITRO DB8E random orbital polisher\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DB8E\u003c\/strong\u003e is a pneumatic random orbital polisher designed for professional finishing on bodywork, plastic, and painted surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt operates at \u003cstrong\u003e2,500 rpm\u003c\/strong\u003e with a combined rotation + orbit motion. This dual movement guarantees a \u003cstrong\u003euniform finish\u003c\/strong\u003e without marks or hologram traces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e150 mm (6\")\u003c\/strong\u003e backing pad accepts standard Velcro-mount discs. Compatible with the majority of accessories on the market.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eanodized aluminum\u003c\/strong\u003e body is lightweight and corrosion-resistant. The contained weight limits fatigue during long work sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eDynabrade®'s \u003cstrong\u003eNITRO technology\u003c\/strong\u003e refers to a range of high-durability pneumatic tools, optimized for intensive workshop use. Enhanced internal lubrication, extended service life.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\n  \u003cli\u003eSpeed: \u003cstrong\u003e2,500 rpm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003ePad diameter: \u003cstrong\u003e150 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eOrbit: \u003cstrong\u003e8 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003ePower source: \u003cstrong\u003epneumatic\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWorking pressure: \u003cstrong\u003e6.2 bar\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eAir consumption: approx. \u003cstrong\u003e170 L\/min\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eDisc attachment: \u003cstrong\u003eVelcro (PSA)\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eBody: \u003cstrong\u003ealuminum\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eManufacturer\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eSpeed\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eNITRO DB8E\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic random orbital\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e8 mm\u003c\/td\u003e\n\n      \u003ctd\u003e2,500 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork, paint finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e77416\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic random orbital\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e4,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, clear coat\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eLHR21 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003eRupes\u003c\/td\u003e\n\n      \u003ctd\u003eElectric random orbital\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e21 mm\u003c\/td\u003e\n\n      \u003ctd\u003e1,900 rpm\u003c\/td\u003e\n\n      \u003ctd\u003ePaint correction, buffing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eWP 12-15\u003c\/td\u003e\n\n      \u003ctd\u003eMetabo\u003c\/td\u003e\n\n      \u003ctd\u003eElectric random orbital\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm\u003c\/td\u003e\n\n      \u003ctd\u003e2,500 rpm\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eApplications and performance: when to use the NITRO DB8E?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DB8E\u003c\/strong\u003e is designed for \u003cstrong\u003eprofessional finishing on bodywork\u003c\/strong\u003e, paint, and lacquered surfaces. It is intended for body shop technicians, automotive detailers, and demanding finishing professionals.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003erandom orbital\u003c\/strong\u003e motion combines rotation and orbit to eliminate paint defects without leaving marks. Result: a uniform surface, ready for wax or protective sealant.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt excels in several types of operations:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePaint correction\u003c\/strong\u003e: removal of micro-scratches, swirls, and sanding marks\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFinishing polish\u003c\/strong\u003e: optimal gloss on fresh or aged clear coats\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMechanical decontamination\u003c\/strong\u003e: surface preparation before ceramic coating or wax\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eLocalized work\u003c\/strong\u003e: precise touch-ups thanks to the Ø 80 mm pad\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO DB8E\u003c\/strong\u003e is equally suitable for \u003cstrong\u003elarge flat surfaces\u003c\/strong\u003e (hood, roof, fenders) and more delicate areas like pillars or mirrors.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts brushless electric motor ensures \u003cstrong\u003econstant speed under load\u003c\/strong\u003e, even with sustained pressure. Power does not drop during operation, which ensures a uniform result across the entire treated surface.\u003c\/p\u003e\u003ch2\u003eNITRO DB8E vs other Dynabrade® polishers: comparison table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003eComparison of NITRO DB8E, NITRO ROB2, and NITRO RB4\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO range from Dynabrade®\u003c\/strong\u003e offers several random orbital polishers, each designed for a specific use. Here is how the \u003cstrong\u003eDB8E\u003c\/strong\u003e positions itself against its two siblings.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003e\u003cstrong\u003eNITRO DB8E\u003c\/strong\u003e\u003c\/th\u003e\n\n      \u003cth\u003eNITRO ROB2\u003c\/th\u003e\n\n      \u003cth\u003eNITRO RB4\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMotion type\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eRandom orbital\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n      \u003ctd\u003eRotary\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePad diameter\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e150 mm\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eSpeed (rpm)\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eup to 1,500\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eup to 1,800\u003c\/td\u003e\n\n      \u003ctd\u003eup to 2,500\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eWeight\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e~1.1 kg\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e~0.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003e~1.3 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMain use\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFinishing, buffing, light correction\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing on small areas\u003c\/td\u003e\n\n      \u003ctd\u003eAggressive correction, scuffing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eClear coat burn risk\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eVery low\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eVery low\u003c\/td\u003e\n\n      \u003ctd\u003eModerate to high\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eUser profile\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eBody shop, pro detailer\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDetailer, tight areas\u003c\/td\u003e\n\n      \u003ctd\u003eExperienced body technician\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDB8E\u003c\/strong\u003e offers the best compromise between \u003cstrong\u003esurface area coverage and clear coat safety\u003c\/strong\u003e. Its 150 mm pad accelerates work on large surfaces without the risk of burning the paint.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eROB2\u003c\/strong\u003e is more compact: ideal for \u003cstrong\u003ehard-to-reach areas\u003c\/strong\u003e like fenders or mirrors. The \u003cstrong\u003eRB4\u003c\/strong\u003e is aimed at professionals who master the rotary machine for deep corrections.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor the majority of \u003cstrong\u003eprofessional body shop finishing\u003c\/strong\u003e, the NITRO DB8E remains the most versatile and secure choice in the range.\u003c\/p\u003e\u003ch2\u003eUsage and maintenance tips for the Dynabrade® NITRO DB8E\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DB8E\u003c\/strong\u003e is a pneumatic random orbital polisher designed for professional finishing. A few best practices allow you to get the most out of it and extend its lifespan.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eBefore each use, check that the \u003cstrong\u003ecompressed air supply\u003c\/strong\u003e is clean, dry, and regulated between 6.2 and 6.9 bar. Incorrect pressure degrades performance and prematurely wears out internal parts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eLubricate the tool daily with a few drops of \u003cstrong\u003epneumatic tool oil\u003c\/strong\u003e directly into the air inlet. This protects the vane motor and maintains consistent rotational speed.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eInstall the \u003cstrong\u003esanding pad\u003c\/strong\u003e firmly before starting. An improperly secured pad generates parasitic vibrations and compromises the quality of the finish on bodywork or lacquered surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAlways work by moving the tool slowly, with \u003cstrong\u003elight and constant pressure\u003c\/strong\u003e. Pushing hard does not speed up the work, it risks burning the clear coat or creating marks that are difficult to correct.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAfter each session, clean the \u003cstrong\u003eair exhaust ports\u003c\/strong\u003e with compressed air to clear out compound residue. Store the tool in a dry place, protected from impacts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eRecommended air pressure: \u003cstrong\u003e6.2 to 6.9 bar\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eLubrication: daily, pneumatic oil\u003c\/li\u003e\n\n  \u003cli\u003ePad: check tightness before each use\u003c\/li\u003e\n\n  \u003cli\u003ePressure: light, uniform\u003c\/li\u003e\n\n  \u003cli\u003eCleaning: blow-out after each use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegular maintenance ensures that the \u003cstrong\u003eNITRO DB8E\u003c\/strong\u003e maintains its performance in the long term, whether in a body shop, detailing, or industrial finishing environment.\u003c\/p\u003e\u003ch2\u003eFAQ - Dynabrade® NITRO DB8E Random Orbital Polisher\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between a random orbital polisher and a traditional orbital?\u003c\/h3\u003e\n\u003cp\u003eA traditional orbital performs only a circular motion. The random orbital combines rotation and orbit simultaneously, resulting in a more uniform finish and eliminating \u003cstrong\u003eswirl marks\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DB8E\u003c\/strong\u003e utilizes this dual motion for a professional finish on bodywork, clear coats, and painted surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What pad diameter should be used with the DB8E?\u003c\/h3\u003e\n\u003cp\u003eThe DB8E is designed for \u003cstrong\u003e125 mm\u003c\/strong\u003e pads. This size is ideal for curved surfaces or medium-sized areas, with a good balance between coverage and precision.\u003c\/p\u003e\n\u003cp\u003eFor large flat surfaces, a \u003cstrong\u003e150 mm\u003c\/strong\u003e pad polisher like the Dynabrade® DB15E would be more productive.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is the NITRO DB8E suitable for intensive workshop use?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003cstrong\u003eNITRO\u003c\/strong\u003e range from Dynabrade® is designed for intensive professional use. The DB8E's brushless motor offers increased lifespan and consistent power delivery.\u003c\/p\u003e\n\n\u003cp\u003eIt handles long polishing sessions without overheating, making it a reliable tool for body shop technicians and automotive detailers.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Can it be used for aggressive paint correction?\u003c\/h3\u003e\n\u003cp\u003eYes, provided you pair it with the right foam or abrasive disc. With a \u003cstrong\u003ecutting correction pad\u003c\/strong\u003e and an adapted abrasive polish, the DB8E effectively removes light to medium scratches.\u003c\/p\u003e\n\u003cp\u003eFor deep defects, a rotary polisher remains more suitable for the first pass.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Is the DB8E compatible with accessories from other brands?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e125 mm Velcro\u003c\/strong\u003e attachment is a market standard. Pads and discs from brands like Rupes, Mirka, or Lake Country are generally compatible.\u003c\/p\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer selected accessories to ensure compatibility and the best performance with the DB8E.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. What speed should be chosen for the final finish?\u003c\/h3\u003e\n\u003cp\u003eFor a glossy finish without marks, a \u003cstrong\u003elow to moderate speed\u003c\/strong\u003e is recommended (between 1,500 and 3,000 rpm depending on the polish used). The DB8E features precise electronic speed control to refine the result.\u003c\/p\u003e\n\u003cp\u003eAlways start with a test on a small area before treating the entire surface.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"150 \/ 1000W","offer_id":58488306925951,"sku":"DYNA_DB8E","price":578.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/polisseuse-roto-orbitale-dynabradeR-nitro-db8e.jpg?v=1789990334"},{"product_id":"polisseuse-electrique-dynabrader-nitro-rb4","title":"Dynabrade® NITRO RB4 Electric Polisher","description":"\u003ch2\u003eDynabrade® NITRO RB4 Electric Polisher: The high-performance rotary for professional finishes\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO RB4\u003c\/strong\u003e is an \u003cstrong\u003eelectric rotary polisher\u003c\/strong\u003e designed for professionals who make no compromises on finish quality.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003ePowerful, precise, and robust, it is a standout tool for bodywork, composites, and demanding surfaces where every pass counts.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official \u003cstrong\u003eDynabrade®\u003c\/strong\u003e distributor, you get access to the original machine along with the technical support that comes with it.\u003c\/p\u003e\u003ch2\u003ePresentation of the Dynabrade® NITRO RB4: technology and design\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO RB4\u003c\/strong\u003e is an electric rotary polisher designed for demanding finishing applications. It is aimed at body shop technicians, detailers, and automotive paint professionals who make no compromises on the final result.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003ehigh-power\u003c\/strong\u003e electric motor delivers constant torque, even under load. No loss of speed during work: the disc maintains its speed regardless of the pressure applied.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe design of the NITRO RB4 incorporates \u003cstrong\u003eadvanced electronic regulation\u003c\/strong\u003e. The speed remains stable from the beginning to the end of the polishing process, which guarantees a uniform finish over the entire treated surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\n\u003ch3\u003eThe Dynabrade® NITRO series: a range designed for professionals\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO\u003c\/strong\u003e range represents Dynabrade®'s high-end electric tool offering. Every model in the series is developed for intensive use in a professional workshop.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAmong the features common to the series:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eOptimized ergonomics\u003c\/strong\u003e: contoured handle to reduce fatigue during long sessions\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eIntegrated electronic variable speed control\u003c\/strong\u003e with speed maintenance\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eRobust design\u003c\/strong\u003e: reinforced housing to withstand workshop environments\u003c\/li\u003e\n\n  \u003cli\u003eCompatibility with \u003cstrong\u003estandard polishing pads\u003c\/strong\u003e on the market\u003c\/li\u003e\n\n  \u003cli\u003eSoft start to avoid product splatter\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the NITRO RB4 as a central reference for workshops seeking a reliable, high-performance rotary tool for daily use.\u003c\/p\u003e\u003ch2\u003eTechnical specifications of the NITRO RB4 electric polisher\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO RB4\u003c\/strong\u003e is an electric rotary polisher designed for demanding finishes in bodywork, paint, and industry.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt develops a \u003cstrong\u003evariable speed from 600 to 3,000 rpm\u003c\/strong\u003e, adjustable via the integrated electronic dial. The motor torque remains stable even under load, which guarantees a uniform result over the entire surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e150 mm polishing pad\u003c\/strong\u003e adapts to standard foams, wools, and abrasive discs. The quick-mount feature facilitates accessory changes during work.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAmong the key technical points:\u003c\/p\u003e\n\u003cul\u003e\n\n  \u003cli\u003eMotor power: \u003cstrong\u003e1,200 W\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eVariable speed: 600-3,000 rpm\u003c\/li\u003e\n\n  \u003cli\u003ePad diameter: \u003cstrong\u003e150 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWeight: approximately 2.3 kg\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: 230 V \/ 50 Hz\u003c\/li\u003e\n\n  \u003cli\u003eCable length: 4 m\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ecast aluminum\u003c\/strong\u003e housing combines robustness and lightness. The grip remains comfortable during long sessions, thanks to the ergonomic anti-slip handle.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eSpeed (rpm)\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade® NITRO RB4\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e1,200 W\u003c\/td\u003e\n\n      \u003ctd\u003e600-3,000\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, paint correction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFlex PE 14-2 150\u003c\/td\u003e\n\n      \u003ctd\u003e1,400 W\u003c\/td\u003e\n\n      \u003ctd\u003e400-2,000\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive bodywork polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003e500 W\u003c\/td\u003e\n\n      \u003ctd\u003e1,800-4,800 (opm)\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital polishing, fine finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe NITRO RB4 is distinguished by its \u003cstrong\u003ehigh torque at low speed\u003c\/strong\u003e, ideal for working on paint corrections without burning the clear coat.\u003c\/p\u003e\u003ch2\u003ePerformance and applications: for what polishing jobs should you use the NITRO RB4?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO RB4\u003c\/strong\u003e is an \u003cstrong\u003eelectric rotary polisher\u003c\/strong\u003e designed for professionals who demand an impeccable finish on large surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts powerful motor and rotary motion allow it to tackle both \u003cstrong\u003edeep paint defects\u003c\/strong\u003e and light micro-scratches. It adapts to almost every stage of the polishing cycle.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the typical applications for which the NITRO RB4 excels:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePaint correction\u003c\/strong\u003e: elimination of sanding marks, oxidation traces, lacquer defects\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eDull removal and polishing\u003c\/strong\u003e: surface preparation before ceramic or wax protection\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAutomotive bodywork finishing\u003c\/strong\u003e: hoods, fenders, roofs, doors\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eComposite and plastic surfaces\u003c\/strong\u003e: boats, industrial parts, furniture\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eLarge flat surfaces\u003c\/strong\u003e: trucks, RVs, airplanes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to other polishers on the market, the NITRO RB4 is clearly positioned in the \u003cstrong\u003ehigh-performance professional segment\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eProduct\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003eSpeed (rpm)\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n      \u003cth\u003eLevel\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade® NITRO RB4\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eElectric rotary\u003c\/td\u003e\n\n      \u003ctd\u003e600-3,000\u003c\/td\u003e\n\n      \u003ctd\u003eCorrection + bodywork \/ industrial finishing\u003c\/td\u003e\n\n      \u003ctd\u003eProfessional\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade® NITRO DA\u003c\/td\u003e\n\n      \u003ctd\u003eDual Action Orbital\u003c\/td\u003e\n\n      \u003ctd\u003e2,500-5,000\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, anti-hologram\u003c\/td\u003e\n\n      \u003ctd\u003eProfessional\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFlex XFE 7-15 150\u003c\/td\u003e\n\n      \u003ctd\u003eElectric rotary\u003c\/td\u003e\n\n      \u003ctd\u003e400-3,000\u003c\/td\u003e\n\n      \u003ctd\u003eAutomotive paint correction\u003c\/td\u003e\n\n      \u003ctd\u003eProfessional\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003eDual Action Orbital\u003c\/td\u003e\n\n      \u003ctd\u003e1,600-4,200\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing and polishing\u003c\/td\u003e\n\n      \u003ctd\u003eProfessional\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe NITRO RB4 stands out for its \u003cstrong\u003ecorrection\/finishing versatility\u003c\/strong\u003e: whereas a dual-action tool remains limited on severe defects, the Dynabrade® rotary handles both stages without changing machines.\u003c\/p\u003e\u003ch2\u003eNITRO RB4 vs other electric polishers: comparison table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eComparison: NITRO RB4, NITRO ROB2, and NITRO DB8E\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO\u003c\/strong\u003e range covers three distinct needs. Here is how to choose the right tool according to your application.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003e\u003cstrong\u003eNITRO RB4\u003c\/strong\u003e\u003c\/th\u003e\n\n      \u003cth\u003eNITRO ROB2\u003c\/th\u003e\n\n      \u003cth\u003eNITRO DB8E\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMotion type\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eRotary\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eRotary \/ Orbital\u003c\/td\u003e\n\n      \u003ctd\u003eRandom Orbital Dual Action\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMax speed\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e1,800 rpm\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e1,400 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e900 rpm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMotor power\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e1,200 W\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e1,000 W\u003c\/td\u003e\n\n      \u003ctd\u003e800 W\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePad diameter\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e150 mm\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMain use\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eCorrection, intensive glossing\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eIntermediate polishing\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, gentle polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eUser profile\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003ePro body shop tech, detailer\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile technician\u003c\/td\u003e\n\n      \u003ctd\u003eFinisher, detailer\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eClear coat burn risk\u003c\/td\u003e\n\n      \u003ctd\u003eHigh (mastery required)\u003c\/td\u003e\n\n      \u003ctd\u003eModerate\u003c\/td\u003e\n\n      \u003ctd\u003eLow\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO RB4\u003c\/strong\u003e is the most powerful of the three machines. It is intended for professionals who have mastered the rotary technique.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO ROB2\u003c\/strong\u003e offers an interesting compromise: it combines rotation and orbit to limit risks on fragile clear coats.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO DB8E\u003c\/strong\u003e is suitable for \u003cstrong\u003edelicate finishes\u003c\/strong\u003e and final polishing. Less aggressive, it is more forgiving of pressure errors.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary: choose the \u003cstrong\u003eNITRO RB4\u003c\/strong\u003e to correct deep defects and obtain a mirror-like shine in a minimum number of passes.\u003c\/p\u003e\u003ch2\u003eUsage and maintenance advice for the Dynabrade® NITRO RB4\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO RB4\u003c\/strong\u003e is an electric rotary polisher designed for professional finishes. Used correctly, it will last for years. Here is the essential information to know.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eBefore each use, \u003cstrong\u003echeck the condition of the polishing pad\u003c\/strong\u003e and the power cable. A warped or worn pad degrades finish quality and unnecessarily strains the motor.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAlways adapt the \u003cstrong\u003erotation speed to the product used\u003c\/strong\u003e. Corrective polishes are applied at moderate speed (1,200-1,800 rpm), light finishes at low speed. Avoid high speeds on thin paint: you risk burning it.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWork in \u003cstrong\u003eregular, overlapping passes\u003c\/strong\u003e with constant, light pressure. Let the machine do the work. Excessive pressure heats the surface and accelerates pad wear.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAfter each session, \u003cstrong\u003eclean the pad and the protective housing\u003c\/strong\u003e using a dry or slightly damp cloth. Never use harsh solvents on plastic parts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegularly \u003cstrong\u003eblow out the ventilation vents\u003c\/strong\u003e to prevent the accumulation of polishing dust. A motor that cannot breathe well will overheat and age prematurely.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCheck the condition of the \u003cstrong\u003emotor brushes\u003c\/strong\u003e every 100 to 150 hours of use. This is a common wear part on rotary polishers: timely replacement avoids breakdowns in the middle of a job.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eStore the NITRO RB4 in its case, away from humidity. Careful storage protects the \u003cstrong\u003ebearings and electronic components\u003c\/strong\u003e of the speed control system.\u003c\/p\u003e\u003ch2\u003eFAQ - Dynabrade® NITRO RB4 Electric Polisher\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the Dynabrade® NITRO RB4 and what is it used for?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eNITRO RB4 is an electric rotary polisher\u003c\/strong\u003e designed for professional finishes on bodywork, paint, and lacquered surfaces. It is aimed at body shop technicians, preparers, and detailers seeking power and precision.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What is the difference between a rotary polisher and an orbital polisher?\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003erotary rotates on a fixed axis\u003c\/strong\u003e: it generates more heat and removes more material. It is the ideal tool for correcting deep defects, significant scratches, or oxidized paint.\u003c\/p\u003e\n\u003cp\u003eAn orbital (DA) is softer and more forgiving. The NITRO RB4 is a rotary: it requires some mastery but offers \u003cstrong\u003eunmatched correction results\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. On what materials can the NITRO RB4 be used?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for \u003cstrong\u003eclear-coated paints, two-component lacquers, gelcoats\u003c\/strong\u003e, and treated plastic surfaces. It is suitable for both steel and composite bodywork, provided the disc and polish used are adapted.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What pad size should be chosen with the NITRO RB4?\u003c\/h3\u003e\n\u003cp\u003eDynabrade generally recommends \u003cstrong\u003e125 to 150 mm pads\u003c\/strong\u003e for versatile use. An 80 mm pad is preferable for narrow areas like pillars or mirrors.\u003c\/p\u003e\n\u003cp\u003eThe choice of pad directly influences the \u003cstrong\u003econtact surface, the pressure applied, and the fineness of the result\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Is the NITRO RB4 compatible with discs from other brands?\u003c\/h3\u003e\n\u003cp\u003eYes, the NITRO RB4's \u003cstrong\u003estandard M14 threaded\u003c\/strong\u003e mount makes it compatible with the vast majority of pads and discs on the market. This offers significant flexibility to adapt the tooling for each application.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Why do we offer the NITRO RB4 at Dagobert Industrie rather than another rotary?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade NITRO\u003c\/strong\u003e range stands out for its ergonomic design and robustness in intensive use. At Dagobert Industrie, we select tools that last over time in a professional workshop.\u003c\/p\u003e\n\u003cp\u003eThe NITRO RB4 offers a \u003cstrong\u003epower-to-maneuverability ratio\u003c\/strong\u003e that is hard to find in this category, making it a consistent choice for demanding professionals.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"3300 rpm \/ 1000W","offer_id":58488306041215,"sku":"DYNA_RB4","price":284.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/polisseuse-electrique-dynabradeR-nitro-rb4.jpg?v=1789990335"},{"product_id":"perceuse-visseuse-a-percussion-fein-sans-fil-ascm-18-qmp-as","title":"FEIN Cordless Impact Drill Driver ASCM 18 QMP AS","description":"\u003ch2\u003eFEIN ASCM 18 QMP AS Cordless Percussion Drill\/Driver, Professional Power and Precision\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18 QMP AS\u003c\/strong\u003e is a \u003cstrong\u003ecordless percussion drill\/driver\u003c\/strong\u003e tailored for professionals who make no compromises on performance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its brushless motor and \u003cstrong\u003e18V battery\u003c\/strong\u003e, it delivers torque, endurance, and precision on all types of materials.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eQuick-In chuck\u003c\/strong\u003e and its \u003cstrong\u003e4 mechanical speeds\u003c\/strong\u003e make this tool a versatile ally, equally at home on wood, steel, or concrete.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official FEIN distributor, you get access to the original version of the tool with the manufacturer's warranty.\u003c\/p\u003e\u003ch2\u003ePresentation of the FEIN ASCM 18 QMP AS: A High-End 4-Speed Percussion Drill\/Driver\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18 QMP AS\u003c\/strong\u003e is a cordless percussion drill\/driver designed for professionals who make no compromises on precision and endurance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003cp\u003eIt features an \u003cstrong\u003e18V brushless motor\u003c\/strong\u003e coupled with a \u003cstrong\u003e4-speed\u003c\/strong\u003e gearbox. This fourth gear is rare in this segment: it offers an extended speed range, ideal for adapting the machine to every material and application.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003cp\u003eThe integrated percussion mode allows you to tackle \u003cstrong\u003emasonry, light concrete, and brick\u003c\/strong\u003e without changing tools. A real time-saver on the job site.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eQuickIN Technology and FEIN Design: What Sets This Model Apart\u003c\/h3\u003e\n\n\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuickIN Max\u003c\/strong\u003e chuck is FEIN's signature on this tool. It accepts 1\/4\" hexagonal bits and round shank drill bits without an adapter, in one single motion.\u003c\/p\u003e\n\n\u003cp\u003eChanging an accessory takes less than two seconds. On an intense job site, that changes everything.\u003c\/p\u003e\n\n\u003cp\u003eThe FEIN mechanical design focuses on \u003cstrong\u003elong-term robustness\u003c\/strong\u003e: aluminum housing, metal gears, and careful balancing. The machine sits comfortably in the hand without fatigue, even during prolonged use.\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003e4 mechanical speeds\u003c\/strong\u003e for fine adaptation to the material\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eBrushless motor\u003c\/strong\u003e: increased service life, less maintenance\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eQuickIN Max chuck\u003c\/strong\u003e: ultra-fast accessory changes\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eIntegrated percussion mode\u003c\/strong\u003e for concrete and masonry\u003c\/li\u003e\n\n  \u003cli\u003eMaximum torque of \u003cstrong\u003e95 Nm\u003c\/strong\u003e for demanding screw driving\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with \u003cstrong\u003eFEIN AMPShare 18 V batteries\u003c\/strong\u003e (shared platform)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we stock this tool because it meets the requirements of industrial environments and intensive finishing work, where a consumer-grade drill quickly reaches its limits.\u003c\/p\u003e\u003ch2\u003eDetailed Technical Specifications of the FEIN ASCM 18 QMP AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18 QMP AS\u003c\/strong\u003e is an 18V cordless percussion drill\/driver designed for demanding professionals. It combines power, precision, and versatility in a compact format.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts brushless motor delivers a \u003cstrong\u003emaximum torque of 130 Nm\u003c\/strong\u003e, sufficient to tackle solid wood, steel, and light masonry effortlessly.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e4-speed mechanical\u003c\/strong\u003e transmission is a rare asset in this category. It allows for precise adjustment of speed and torque for every material and screw driving task.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e13 mm Quick-IN chuck\u003c\/strong\u003e accepts standard drill bits and screw bits. The tool change is keyless and takes just a few seconds on the job site.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe mode selector allows you to switch between \u003cstrong\u003edrilling, screw driving, and percussion\u003c\/strong\u003e depending on the substrate. The percussion function remains suitable for light masonry materials.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eVoltage: \u003cstrong\u003e18 V\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eMax torque: \u003cstrong\u003e130 Nm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eMechanical speeds: \u003cstrong\u003e4\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eSteel drilling diameter: up to \u003cstrong\u003e13 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWood drilling diameter: up to \u003cstrong\u003e65 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eMasonry drilling diameter: up to \u003cstrong\u003e16 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWeight (without battery): approximately \u003cstrong\u003e1.9 kg\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eBattery compatibility: \u003cstrong\u003eFEIN 18 V AMPShare system\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eMax Torque\u003c\/th\u003e\n\n      \u003cth\u003eSpeeds\u003c\/th\u003e\n\n      \u003cth\u003ePercussion\u003c\/th\u003e\n\n      \u003cth\u003eWeight (w\/o batt.)\u003c\/th\u003e\n\n      \u003cth\u003eTypical Usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN ASCM 18 QMP AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~1.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003ePro multi-purpose, light masonry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFEIN ASCM 18 QM\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003e~1.8 kg\u003c\/td\u003e\n\n      \u003ctd\u003ePro wood\/metal screw\/drill\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DHP486\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~1.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003ePro multi-purpose\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GSB 18V-90 C\u003c\/td\u003e\n\n      \u003ctd\u003e64 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~1.8 kg\u003c\/td\u003e\n\n      \u003ctd\u003eJob site multi-purpose\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eAMPShare compatibility\u003c\/strong\u003e allows you to use FEIN 18V batteries across the entire FEIN range, as well as on tools from other brands that are part of the standard. A real advantage for multi-tool workshops.\u003c\/p\u003e\u003ch2\u003eIn-Situation Performance: Drilling, Screw Driving, Tapping, and Hole Saws\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eASCM 18 QMP AS\u003c\/strong\u003e covers a wide spectrum of applications, from light job site work to demanding metalwork. Its 4-speed transmission and maximum torque of \u003cstrong\u003e130 Nm\u003c\/strong\u003e allow it to handle the most demanding tasks without losing control.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe integrated percussion mode opens the door to \u003cstrong\u003edrilling in masonry and concrete\u003c\/strong\u003e, without having to change machines. A real time-saver on the job site.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDrilling and Tapping Capacities by Material\u003c\/h3\u003e\n\n\u003cp\u003eEvery material has its requirements. Here is what the ASCM 18 QMP AS can concretely do:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSteel\u003c\/strong\u003e: drilling up to \u003cstrong\u003e13 mm\u003c\/strong\u003e, tapping up to \u003cstrong\u003eM10\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWood\u003c\/strong\u003e: drilling up to \u003cstrong\u003e40 mm\u003c\/strong\u003e, effortless driving of long screws\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMasonry \/ concrete\u003c\/strong\u003e: drilling up to \u003cstrong\u003e13 mm\u003c\/strong\u003e in percussion mode\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eHole saws\u003c\/strong\u003e: diameters up to \u003cstrong\u003e68 mm\u003c\/strong\u003e in wood\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eTapping is natively handled\u003c\/strong\u003e thanks to the dedicated speed selection. No need for an external adapter or complex settings.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor hole saws, the reduced speed in 1st gear ensures \u003cstrong\u003esufficient torque without excessive overheating\u003c\/strong\u003e. Ideal for electricians and plumbers who perform serial work.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eMax Torque (Nm)\u003c\/th\u003e\n\n      \u003cth\u003eSpeeds\u003c\/th\u003e\n\n      \u003cth\u003eSteel Drill (max)\u003c\/th\u003e\n\n      \u003cth\u003eWood Drill (max)\u003c\/th\u003e\n\n      \u003cth\u003eTapping\u003c\/th\u003e\n\n      \u003cth\u003ePercussion\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN ASCM 18 QMP AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003e13 mm\u003c\/td\u003e\n\n      \u003ctd\u003e40 mm\u003c\/td\u003e\n\n      \u003ctd\u003eM10\u003c\/td\u003e\n\n      \u003ctd\u003e✔\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFEIN ASCM 18 QM (no percussion)\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003e13 mm\u003c\/td\u003e\n\n      \u003ctd\u003e40 mm\u003c\/td\u003e\n\n      \u003ctd\u003eM10\u003c\/td\u003e\n\n      \u003ctd\u003e✘\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DHP486\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e13 mm\u003c\/td\u003e\n\n      \u003ctd\u003e38 mm\u003c\/td\u003e\n\n      \u003ctd\u003e-\u003c\/td\u003e\n\n      \u003ctd\u003e✔\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMilwaukee M18 FPD2\u003c\/td\u003e\n\n      \u003ctd\u003e135 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e13 mm\u003c\/td\u003e\n\n      \u003ctd\u003e40 mm\u003c\/td\u003e\n\n      \u003ctd\u003e-\u003c\/td\u003e\n\n      \u003ctd\u003e✔\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e4-speed transmission\u003c\/strong\u003e is the true differentiator compared to the 2-speed models on the market. It offers a much finer range of speeds, useful whenever switching from M3 tapping to large-diameter hole saws.\u003c\/p\u003e\u003ch2\u003eComparison: FEIN ASCM 18 QMP AS vs. Competing Cordless Percussion Drills\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18 QMP AS\u003c\/strong\u003e is positioned in the high-end segment of cordless percussion drill\/drivers. Here is how it compares to market benchmarks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eVoltage\u003c\/th\u003e\n\n      \u003cth\u003eMax Torque\u003c\/th\u003e\n\n      \u003cth\u003eSpeeds\u003c\/th\u003e\n\n      \u003cth\u003ePercussion\u003c\/th\u003e\n\n      \u003cth\u003eWeight (w\/o batt.)\u003c\/th\u003e\n\n      \u003cth\u003ePositioning\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN ASCM 18 QMP AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e4 speeds\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~1.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003eDemanding professional\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GSB 18V-150 C\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e150 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2 speeds\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~2.1 kg\u003c\/td\u003e\n\n      \u003ctd\u003eProfessional multi-purpose\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DHP487\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e73 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2 speeds\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~1.7 kg\u003c\/td\u003e\n\n      \u003ctd\u003eSemi-professional\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMilwaukee M18 FPD2\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e135 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2 speeds\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~2.0 kg\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive professional\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDeWalt DCD996\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e95 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e3 speeds\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003e~1.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003eProfessional multi-purpose\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe FEIN ASCM 18 QMP AS stands out with its \u003cstrong\u003e4-speed gearbox\u003c\/strong\u003e, a rarity in this category. This allows for much finer speed control than the Bosch, Milwaukee, or DeWalt models, all of which are limited to 2 or 3 speeds.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the \u003cstrong\u003eMakita DHP487\u003c\/strong\u003e, the FEIN offers significantly higher torque. It is suitable for heavy metal or concrete work, where the Makita reaches its limits.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the \u003cstrong\u003eMilwaukee M18 FPD2\u003c\/strong\u003e, which has similar torque levels, the FEIN wins on \u003cstrong\u003escrew driving precision\u003c\/strong\u003e thanks to its high-performance brushless motor and advanced electronic management.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003econtained weight (~1.9 kg)\u003c\/strong\u003e is a tangible advantage on job sites at heights or in constrained positions, especially compared to the Bosch GSB 18V-150 C, which is 200g heavier.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary, the FEIN ASCM 18 QMP AS is the go-to for professionals who prioritize \u003cstrong\u003eprecision, versatility, and long-term durability\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eBox Contents and Accessories Included with the FEIN ASCM 18 QMP AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18 QMP AS\u003c\/strong\u003e is delivered in a complete set, ready for use upon receipt. No need to run out and get separate accessories.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe set includes \u003cstrong\u003etwo 18V batteries\u003c\/strong\u003e in a compact format. While one is in use, the other charges, no work stoppages.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eALG 18 W rapid charger\u003c\/strong\u003e is also included. It charges a battery in about 35 minutes, which perfectly suits professional work cycles.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe entire set is packed in a \u003cstrong\u003erobust carrying case\u003c\/strong\u003e. It protects the tool and batteries during transport and storage on site.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the details of the contents:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\u003cstrong\u003eFEIN ASCM 18 QMP AS Percussion Drill\/Driver\u003c\/strong\u003e\u003c\/li\u003e\n\n  \u003cli\u003e2 18V Li-Ion batteries (typically 5.2 Ah)\u003c\/li\u003e\n\n  \u003cli\u003e\u003cstrong\u003eALG 18 W rapid charger\u003c\/strong\u003e\u003c\/li\u003e\n\n  \u003cli\u003eRigid carrying case\u003c\/li\u003e\n\n  \u003cli\u003eInstruction manual\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThese contents position the FEIN ASCM 18 QMP AS as a \u003cstrong\u003eturnkey solution\u003c\/strong\u003e. No essential accessory is missing to start immediately.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this set as configured by FEIN, without modifying the original contents, a guarantee of consistency and manufacturer quality.\u003c\/p\u003e\u003ch2\u003eFAQ - FEIN ASCM 18 QMP AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between the FEIN ASCM 18 QMP AS and a standard drill\/driver?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eASCM 18 QMP AS\u003c\/strong\u003e includes a percussion function in addition to standard drilling and screw driving.\u003c\/p\u003e\n\u003cp\u003eConcretely, it tackles concrete, masonry, and hard materials without needing a separate hammer drill. One tool for three uses.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. Is a brushless motor really useful on a daily basis?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003cstrong\u003ebrushless motor\u003c\/strong\u003e of the FEIN ASCM 18 QMP AS delivers more torque, consumes less energy, and lasts much longer than a brushed motor.\u003c\/p\u003e\n\u003cp\u003eLess maintenance, more battery autonomy, and reduced heat even during intensive use. It is a real advantage for long-term work sites.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. What materials can be worked with this tool?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eASCM 18 QMP AS\u003c\/strong\u003e handles wood, metal, plastic, light concrete, and standard masonry without difficulty.\u003c\/p\u003e\n\u003cp\u003eFor deep drilling in reinforced concrete, a dedicated hammer drill like the \u003cstrong\u003eFEIN ABH 18\u003c\/strong\u003e remains more suitable.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What is the 4-speed torque selector actually used for?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e4-speed selector\u003c\/strong\u003e allows you to precisely adapt the torque to each task: fine screw driving on soft wood, metal assembly, fast drilling, or percussion.\u003c\/p\u003e\n\u003cp\u003eThis prevents stripping screw heads or damaging fragile materials. This is what distinguishes a professional tool from a consumer-grade one.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Which batteries are compatible with the FEIN ASCM 18 QMP AS?\u003c\/h3\u003e\n\u003cp\u003eThe tool works with \u003cstrong\u003eFEIN 18 V batteries from the FEIN AMPShare range\u003c\/strong\u003e. These accumulators are compatible with the entire FEIN 18V range.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the FEIN batteries and chargers suitable for completing your equipment.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Is the FEIN ASCM 18 QMP AS suitable for intensive professional use?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely. FEIN designs its tools for \u003cstrong\u003eindustry and construction professionals\u003c\/strong\u003e, with robustness standards that are superior to the semi-professional segment.\u003c\/p\u003e\n\u003cp\u003eThe compact construction, ergonomic grip, and brushless motor make it a reliable tool for busy work days.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Default Title","offer_id":58488303976831,"sku":"FEIN_71161661000","price":468.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/perceuse-visseuse-a-percussion-fein-sans-fil-ascm-18-qmp-as.jpg?v=1789990340"},{"product_id":"perceuse-visseuse-sans-fil-fein-ascm-18-4-qm-as","title":"FEIN ASCM 18-4 QM AS Cordless Drill\/Driver","description":"\u003ch2\u003eFEIN ASCM 18-4 QM AS cordless drill\/driver: 18 V power and precision\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e is an \u003cstrong\u003e18 V cordless drill\/driver\u003c\/strong\u003e built for professionals who make no compromises on performance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its \u003cstrong\u003e4 speeds\u003c\/strong\u003e and high torque, it adapts to any material and application, from delicate screwdriving to intensive drilling.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompact, robust, and equipped with a \u003cstrong\u003ebrushless motor\u003c\/strong\u003e, it offers endurance and precision for daily work on the most demanding job sites.\u003c\/p\u003e\u003ch2\u003ePresentation of the FEIN ASCM 18-4 QM AS: a high-end 4-speed cordless drill\/driver\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e is an 18 V cordless drill\/driver designed for professionals who make no compromises on precision and durability. With its \u003cstrong\u003e4 mechanical speeds\u003c\/strong\u003e, it adapts to every material and application.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003cp\u003eThe FEIN brushless motor delivers a \u003cstrong\u003emaximum torque of 130 Nm\u003c\/strong\u003e. This is sufficient for drilling and driving screws into steel, solid wood, or light concrete without losing control.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuickIN chuck\u003c\/strong\u003e allows for tool-free accessory changes in seconds. A real time-saver on the job site.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl----\u003e\u003ch3\u003eQuickIN technology and rapid accessory change system\u003c\/h3\u003e\n\n\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eQuickIN\u003c\/strong\u003e system is a FEIN exclusive. It replaces the traditional keyless chuck with a direct-click mechanism. The accessory locks into place with one motion and is removed just as easily.\u003c\/p\u003e\n\n\u003cp\u003eIn practice: switching from an HSS drill bit to a screwdriver bit takes less than 3 seconds. That makes all the difference in a workday.\u003c\/p\u003e\n\n\u003cp\u003eThe system accepts all \u003cstrong\u003estandard FEIN QuickIN\u003c\/strong\u003e accessories, drill bits, bits, adapters, without any additional adapters. It is fully compatible with the existing range of FEIN accessories.\u003c\/p\u003e\n\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eVoltage\u003c\/th\u003e\n\n      \u003cth\u003eSpeeds\u003c\/th\u003e\n\n      \u003cth\u003eMax. torque\u003c\/th\u003e\n\n      \u003cth\u003eChuck\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003eQuickIN\u003c\/td\u003e\n\n      \u003ctd\u003ePro multi-material drilling \/ driving\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFEIN ASCM 18 QX\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e75 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e13 mm keyless chuck\u003c\/td\u003e\n\n      \u003ctd\u003ePrecise screwdriving, light work\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DDF487\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e80 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e13 mm keyless chuck\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral purpose drilling \/ driving\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMilwaukee M18 FUEL FDD2\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e13 mm keyless chuck\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive drilling, heavy duty\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the FEIN ASCM 18-4 QM AS for teams that work quickly, long hours, and need a reliable tool every time.\u003c\/p\u003e\u003ch2\u003eDetailed technical specifications of the FEIN ASCM 18-4 QM AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e is an 18 V cordless drill\/driver designed for demanding professionals. It features a high-performance brushless motor and a 13 mm keyless chuck.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e4-speed\u003c\/strong\u003e system is one of the machine's major assets. It allows for precise adjustment of speed and torque for each material: wood, metal, stainless steel, or composite materials.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emaximum torque reaches 100 Nm\u003c\/strong\u003e, with 20 adjustable clutch settings. Ideal for driving screws without stripping, drilling without burning, and working with consistent repeatability on the job site.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the main technical specifications:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eVoltage: \u003cstrong\u003e18 V\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eMaximum torque: \u003cstrong\u003e100 Nm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eSpeeds: \u003cstrong\u003e4 gears\u003c\/strong\u003e (up to 1,800 rpm)\u003c\/li\u003e\n\n  \u003cli\u003eChuck: \u003cstrong\u003e13 mm keyless\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eMotor: \u003cstrong\u003ebrushless\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eClutch settings: \u003cstrong\u003e20\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWeight (with battery): approx. \u003cstrong\u003e1.9 kg\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eBattery compatibility: \u003cstrong\u003eFEIN AMPShare 18 V\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe brushless motor guarantees \u003cstrong\u003eextended service life\u003c\/strong\u003e and higher energy efficiency than brushed motors. Less heat, less wear, more runtime per charge.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eMax. torque\u003c\/th\u003e\n\n      \u003cth\u003eSpeeds\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003eWeight (with battery)\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e100 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003e~1.9 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFEIN ASCM 18 QM\u003c\/td\u003e\n\n      \u003ctd\u003e75 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003e~1.7 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DDF487\u003c\/td\u003e\n\n      \u003ctd\u003e80 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003e~1.9 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GSR 18V-90 C\u003c\/td\u003e\n\n      \u003ctd\u003e90 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003e~2.1 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its \u003cstrong\u003e4 speeds and 100 Nm\u003c\/strong\u003e, the FEIN ASCM 18-4 QM AS outperforms its direct competitors in versatility. It is a tool designed for production environments and technical job sites, not just for occasional use.\u003c\/p\u003e\u003ch2\u003eAdvantages and strengths of the FEIN ASCM 18-4 QM AS for professionals\u003c\/h2\u003e\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e is an 18 V drill\/driver designed for professionals who make no compromises on precision and durability.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts brushless motor with \u003cstrong\u003e4 mechanical speeds\u003c\/strong\u003e is one of its major assets. This configuration allows for fine-tuning of torque and speed for every task, from delicate screwdriving to drilling into resistant materials.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eQuickIN MAX\u003c\/strong\u003e system guarantees fast, tool-free accessory changes. On a job site, every second counts, this mechanism prevents unnecessary interruptions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eKey strengths to remember:\u003c\/p\u003e\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eHigh maximum torque\u003c\/strong\u003e for demanding screwdriving tasks\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eKeyless chuck\u003c\/strong\u003e for secure holding of drill bits and driver bits\u003c\/li\u003e\n\n  \u003cli\u003eCompact and balanced design, \u003cstrong\u003eergonomic grip\u003c\/strong\u003e even in difficult positions\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with \u003cstrong\u003eFEIN AMPShare 18 V battery\u003c\/strong\u003e, interchangeable with other FEIN tools\u003c\/li\u003e\n\n  \u003cli\u003eBuilt-in electronic protection against overheating and overloads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this machine for professionals in construction, metalworking, and woodworking who are looking for a reliable, long-term tool.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl----\u003e\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eVoltage\u003c\/th\u003e\n\n      \u003cth\u003eMechanical speeds\u003c\/th\u003e\n\n      \u003cth\u003eMotor technology\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile professional drilling \/ driving\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFEIN ASCM 18 QX\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eFast screwdriving, standard use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DDF487\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile drilling \/ driving\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMilwaukee M18 BLDD2\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive drilling \/ driving\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eComparison: FEIN ASCM 18-4 QM AS versus competing cordless drill\/drivers\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e stands out due to its QuasarMotor brushless motor and its \u003cstrong\u003e4 mechanical speeds\u003c\/strong\u003e, a rare combination in this category. Most cordless drill\/drivers on the market are limited to 2 speeds.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis positioning places it directly against references like the \u003cstrong\u003eFestool T 18+3\u003c\/strong\u003e, the \u003cstrong\u003eBosch GSR 18V-90 C\u003c\/strong\u003e, or the \u003cstrong\u003eMakita DDF487\u003c\/strong\u003e. Each has its strengths, here is how they compare.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl----\u003e\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eVoltage\u003c\/th\u003e\n\n      \u003cth\u003eMechanical speeds\u003c\/th\u003e\n\n      \u003cth\u003eMax. torque\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003eStrength\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003e130 Nm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless QuasarMotor\u003c\/td\u003e\n\n      \u003ctd\u003eTorque precision + 4 speeds\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool T 18+3\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e3\u003c\/td\u003e\n\n      \u003ctd\u003e100 Nm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eErgonomics, Festool ecosystem\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GSR 18V-90 C\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e90 Nm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eBluetooth connectivity\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DDF487\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e80 Nm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eCompactness and light weight\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMilwaukee M18 FDD2\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e135 Nm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eHigh raw torque\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe Milwaukee M18 FDD2 shows slightly higher torque, but it remains at \u003cstrong\u003e2 mechanical speeds\u003c\/strong\u003e. The FEIN wins in fine-tuning thanks to its \u003cstrong\u003e4th speed gear\u003c\/strong\u003e, ideal for precision work on metals or sensitive assemblies.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe Festool T 18+3 is an excellent machine, but its 100 Nm torque and 3 speeds fall short. It is more targeted towards wood and finishing work.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary, the \u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e is aimed at professionals who do not want to choose between power and precision. It is its primary competitive advantage.\u003c\/p\u003e\u003ch2\u003eApplications and areas of use for the FEIN ASCM 18-4 QM AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e is designed for professionals working on demanding job sites. Its versatility makes it a tool adapted to many trades.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt excels at \u003cstrong\u003edrilling and driving in wood, metal, and composite materials\u003c\/strong\u003e. The high torque and 4 speeds allow the machine to be adapted to each material without effort.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eElectricians, plumbers, and carpenters use it daily. It handles small precision screws just as well as \u003cstrong\u003elarge-diameter bolts\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts 4-speed transmission distinguishes it from classic 2-speed drills like the \u003cstrong\u003eBosch GSR 18V-55\u003c\/strong\u003e or the \u003cstrong\u003eMakita DDF484\u003c\/strong\u003e. It offers a much wider range of speeds, useful in both framing and fine locksmithing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eQuickIN AS\u003c\/strong\u003e mode allows bits to be changed without a chuck, which accelerates workflows on the job site. A concrete time-saver on repetitive installations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThanks to its \u003cstrong\u003econtrolled weight and balance in the hand\u003c\/strong\u003e, it is also suitable for work at height or in constrained positions, such as driving screws overhead or inside technical ducts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl----\u003e\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eSpeeds\u003c\/th\u003e\n\n      \u003cth\u003eMax. torque\u003c\/th\u003e\n\n      \u003cth\u003eVoltage\u003c\/th\u003e\n\n      \u003cth\u003eStrength\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e4\u003c\/td\u003e\n\n      \u003ctd\u003e75 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003eVersatility, fast bit changes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GSR 18V-55\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e55 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003eCompactness, lightweight\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DDF484\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e54 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003eRuntime, wide battery network\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMilwaukee M18 BLPD2\u003c\/td\u003e\n\n      \u003ctd\u003e2\u003c\/td\u003e\n\n      \u003ctd\u003e82 Nm\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003eHigh torque, robustness\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eFAQ - FEIN ASCM 18-4 QM AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003eFrequently asked questions about the FEIN ASCM 18-4 QM AS cordless drill\/driver\u003c\/h3\u003e\n\n\u003ch3\u003e1. What is the difference between the FEIN ASCM 18-4 QM AS and a classic 18 V drill\/driver?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFEIN ASCM 18-4 QM AS\u003c\/strong\u003e features 4 mechanical speeds, whereas most 18 V drills offer only 2. This fine adjustment of torque and speed allows the machine to be precisely adapted to the material being worked on.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. For which tasks is this drill\/driver particularly suitable?\u003c\/h3\u003e\n\u003cp\u003eIt is tailored for professionals in metalworking, carpentry, and construction. Its \u003cstrong\u003emaximum torque of 130 Nm\u003c\/strong\u003e and 4 speed ranges make it effective on steel, solid wood, light concrete, and metal structures.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is the FEIN ASCM 18-4 QM AS compatible with batteries from other brands?\u003c\/h3\u003e\n\u003cp\u003eNo. It runs exclusively on \u003cstrong\u003eFEIN 18 V batteries from the AMPShare range\u003c\/strong\u003e. However, these batteries are compatible with all other FEIN 18 V tools, which simplifies fleet management.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What does the suffix \"QM\" in the product name mean?\u003c\/h3\u003e\n\u003cp\u003eThe acronym \u003cstrong\u003eQM (QuadroMotor)\u003c\/strong\u003e refers to the 4-pole brushless motor developed by FEIN. This type of motor offers better energy efficiency, less wear, and a longer service life than traditional brushed motors.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Which chuck is the FEIN ASCM 18-4 QM AS equipped with?\u003c\/h3\u003e\n\u003cp\u003eThe machine is equipped with a \u003cstrong\u003e13 mm keyless chuck\u003c\/strong\u003e. It accepts standard cylindrical shank drill bits and tightens without a key, which speeds up tool changes on the job site.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. At Dagobert Industrie, can we get technical advice before choosing this model?\u003c\/h3\u003e\n\u003cp\u003eYes. \u003cstrong\u003eAt Dagobert Industrie\u003c\/strong\u003e, our technical team knows the FEIN range and can guide you toward the model best suited to your use. Please feel free to contact us directly for concrete advice on your application.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Without battery","offer_id":58480421405055,"sku":"FEIN_71161561000","price":442.8,"currency_code":"EUR","in_stock":true},{"title":"Set of 2 5 Ah batteries and charger","offer_id":59082328146303,"sku":"FEIN_71161567000","price":730.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/perceuse-visseuse-sans-fil-fein-ascm-18-4-qm-as.jpg?v=1789990341"},{"product_id":"ponceuse-orbitale-mirkar-deros-ii-325","title":"Mirka® DEROS II 325 orbital sander","description":"\u003ch2\u003eMirka DEROS II 325 Orbital Sander, Precision and performance for professional sanding\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 325\u003c\/strong\u003e is an \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e designed for professionals who do not compromise on finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eLightweight, quiet, and equipped with a \u003cstrong\u003ebrushless motor\u003c\/strong\u003e, it provides \u003cstrong\u003eprecise and consistent sanding\u003c\/strong\u003e on all surfaces, automotive, wood, and composite.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e125 mm backing pad\u003c\/strong\u003e and \u003cstrong\u003elow vibration\u003c\/strong\u003e reduce fatigue during prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAvailable at \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official \u003cstrong\u003eMirka\u003c\/strong\u003e distributor in France.\u003c\/p\u003e\u003ch2\u003ePresentation of the Mirka DEROS II 325 orbital sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 325\u003c\/strong\u003e is an electric orbital sander designed for professionals who demand precision and consistency on every surface. Its 125 mm backing pad and \u003cstrong\u003e3.25 mm orbit\u003c\/strong\u003e make it an ideal tool for finishing work on car bodies, woodwork, and painted surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ebrushless\u003c\/strong\u003e motor ensures increased longevity and constant power, even under prolonged load. Electronic speed management maintains the selected rpm regardless of usage conditions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 325\u003c\/strong\u003e integrates natively into the Mirka dust extraction system. Connected to a compatible vacuum, it eliminates up to 99% of generated dust, a concrete benefit for health and finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eMirka: a leading Finnish manufacturer in abrasives\u003c\/h3\u003e\u003cbr\u003e\n\n\u003cp\u003eFounded in 1943 in Finland, \u003cstrong\u003eMirka\u003c\/strong\u003e is now world-renowned for its abrasives and sanding machines. The brand notably popularized \u003cstrong\u003enet abrasives\u003c\/strong\u003e (Abranet range), which limit clogging and extend the life of the discs.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eMirka designs its machines and consumables to work together. Using \u003cstrong\u003eMirka discs\u003c\/strong\u003e with the DEROS II 325 means fully leveraging the machine's potential.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the complete Mirka range: machines, abrasives, and accessories, to equip your workshop with a coherent and high-performance system.\u003c\/p\u003e\u003ch2\u003eTechnical characteristics and specifications of the Mirka DEROS II 325\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 325\u003c\/strong\u003e is a compact electric orbital sander designed for work on \u003cstrong\u003esmall surfaces and hard-to-reach areas\u003c\/strong\u003e. Its reduced size makes it a precision tool where a standard sander cannot reach.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt features a 350 W \u003cstrong\u003ebrushless\u003c\/strong\u003e motor. This type of motorization ensures better durability, less maintenance, and precise electronic speed regulation.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe speed is adjustable between \u003cstrong\u003e3,000 and 10,000 rpm\u003c\/strong\u003e, with load maintenance. The tool automatically adjusts its speed based on the pressure applied to the workpiece.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e77 mm diameter backing pad and 2.5 mm orbit: what is it used for?\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e77 mm diameter backing pad\u003c\/strong\u003e is the central feature of this machine. It is a size designed for touch-ups, edges, corners, and curved surfaces, areas where a 125 mm pad would be too bulky.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e2.5 mm orbit\u003c\/strong\u003e produces a tight orbital movement. The result: smooth, highly controlled sanding with few residual marks. It is ideal for finishes on car bodies, woodwork, or painted parts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor comparison, the DEROS II 550CV (125 mm pad, 5 mm orbit) covers larger surfaces but sacrifices precision at the edge of the part. Both machines are complementary in a workspace.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 325\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eØ 77 mm\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, tight areas, touch-ups\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 550CV\u003c\/td\u003e\n\n      \u003ctd\u003eØ 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e550 W\u003c\/td\u003e\n\n      \u003ctd\u003eRapid surface sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 125\/3\u003c\/td\u003e\n\n      \u003ctd\u003eØ 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing on large surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 34-125\u003c\/td\u003e\n\n      \u003ctd\u003eØ 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3.4 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile wood\/metal usage\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eComparison: Mirka DEROS II 325 versus other DEROS II models and the competition\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II\u003c\/strong\u003e range includes several models that are mainly distinguished by their \u003cstrong\u003eorbit\u003c\/strong\u003e and their target usage. Here is how the \u003cstrong\u003eDEROS II 325\u003c\/strong\u003e is positioned.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n      \u003cth\u003eStrong point\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 325\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, bodywork, lacquered wood\u003c\/td\u003e\n\n      \u003ctd\u003eCutting smoothness, impeccable result\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 550\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eIntermediate sanding, versatile\u003c\/td\u003e\n\n      \u003ctd\u003eGood removal\/finishing compromise\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 650\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eStock removal, flat surfaces\u003c\/td\u003e\n\n      \u003ctd\u003eRapid material removal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 125\/3\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, cabinetmaking\u003c\/td\u003e\n\n      \u003ctd\u003eErgonomics, Festool ecosystem\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 125-150 AVE\u003c\/td\u003e\n\n      \u003ctd\u003e2.5-5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125\/150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWorkshop versatile\u003c\/td\u003e\n\n      \u003ctd\u003eAccessible price, dual pad\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith a \u003cstrong\u003e3 mm orbit\u003c\/strong\u003e, the DEROS II 325 is the finishing machine of the range. It leaves a surface almost free of \u003cstrong\u003emicro-scratches\u003c\/strong\u003e, where a 5 or 6 mm orbit works faster but leaves more marks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the \u003cstrong\u003eFestool ETS EC 125\/3\u003c\/strong\u003e, the DEROS II 325 features a slightly lower weight and native \u003cstrong\u003eBluetooth connectivity\u003c\/strong\u003e for speed tracking. A concrete advantage in the workshop.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBosch GEX\u003c\/strong\u003e remains a generalist option. It is suitable for occasional use, but does not compete in terms of \u003cstrong\u003eelectronic regulation\u003c\/strong\u003e or longevity under intensive professional use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary: choose the \u003cstrong\u003eDEROS II 325\u003c\/strong\u003e if your priority is \u003cstrong\u003efinal surface quality\u003c\/strong\u003e, paint, varnish, bodywork, fine wood. To remove material quickly, turn to the 550 or 650.\u003c\/p\u003e\u003ch2\u003eCompatible accessories and dust extraction system of the DEROS II 325\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 325\u003c\/strong\u003e is designed to work within the Mirka ecosystem. It accepts \u003cstrong\u003e125 mm Mirka abrasive discs\u003c\/strong\u003e with Velcro backing, compatible with the entire Abranet, Abralon, Galaxy, and Iridium range.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe backing pad is interchangeable. Mirka offers \u003cstrong\u003esoft, rigid, or ultra-soft pads\u003c\/strong\u003e depending on the profile of the surface to be worked, ideal for switching from a car body to a flat panel without changing machines.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAs for extraction, the DEROS II 325 includes a \u003cstrong\u003e27 mm central extraction port\u003c\/strong\u003e. It connects directly to Mirka extractors (DE, CV series) or any industrial vacuum equipped with a compatible nozzle.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eintegrated dust extraction sanding\u003c\/strong\u003e system drastically reduces dust during work. Combined with Abranet abrasives, whose mesh structure allows air to pass through, the result is significantly superior to conventional sanding.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eMirka Abrasive\u003c\/th\u003e\n\n      \u003cth\u003eSurface type\u003c\/th\u003e\n\n      \u003cth\u003eRecommended grits\u003c\/th\u003e\n\n      \u003cth\u003eTypical usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eAbranet\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eWood, primer, metal\u003c\/td\u003e\n\n      \u003ctd\u003eP80, P400\u003c\/td\u003e\n\n      \u003ctd\u003eUniversal sanding, optimal dust removal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eGalaxy\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eVarnish, lacquer, paint\u003c\/td\u003e\n\n      \u003ctd\u003eP400, P1000\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork finishing, fine deburring\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eIridium\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eSensitive surfaces, composites\u003c\/td\u003e\n\n      \u003ctd\u003eP120, P800\u003c\/td\u003e\n\n      \u003ctd\u003eLong-life sanding, clogging resistance\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eAbralon\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eCurved surfaces, gel coat\u003c\/td\u003e\n\n      \u003ctd\u003eP180, P4000\u003c\/td\u003e\n\n      \u003ctd\u003ePolishing, ultra-fine finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer Mirka abrasives and accessories compatible with the DEROS II 325 so you can equip your machine in a single order.\u003c\/p\u003e\u003ch2\u003eBenefits of dust-free orbital sanding with the Mirka DEROS II 325\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 325\u003c\/strong\u003e integrates an extraction system directly into the sanding pad. Dust is captured at the source, before it can even disperse into the air.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe concrete result: the surface stays clean during work. You see what you are doing, you have better control over the result, and you avoid unnecessary passes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis \u003cstrong\u003edust-free sanding\u003c\/strong\u003e is not just a matter of comfort. It extends the life of the abrasives, reduces clogging, and maintains a \u003cstrong\u003econstant cut rate\u003c\/strong\u003e throughout the duration of use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe main daily benefits:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated extraction\u003c\/strong\u003e effective from the first pass\u003c\/li\u003e\n\n  \u003cli\u003eLess clogged abrasives, therefore active longer\u003c\/li\u003e\n\n  \u003cli\u003eWork surface visible at all times\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eReduced dust exposure\u003c\/strong\u003e for the operator\u003c\/li\u003e\n\n  \u003cli\u003eLess cleaning between sanding steps\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eOn materials like wood, MDF, or composites, dust management radically changes the quality of the final rendering. A 120 grit on MDF without extraction clogs in seconds. With the DEROS II 325, this problem disappears.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eCriteria\u003c\/th\u003e\n\n      \u003cth\u003eMirka DEROS II 325\u003c\/th\u003e\n\n      \u003cth\u003eFestool RO 125\u003c\/th\u003e\n\n      \u003cth\u003eBosch GEX 125 AC\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eIntegrated extraction\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eYes, multi-hole\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eYes, via collector\u003c\/td\u003e\n\n      \u003ctd\u003eYes, microfilter\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePad (mm)\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e125\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e125\u003c\/td\u003e\n\n      \u003ctd\u003e125\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eOrbit (mm)\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e3.0\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 \/ 5.0\u003c\/td\u003e\n\n      \u003ctd\u003e2.5\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eTypical usages\u003c\/td\u003e\n\n      \u003ctd\u003eWood, MDF, composites, bodywork\u003c\/td\u003e\n\n      \u003ctd\u003eWood, fine finishing\u003c\/td\u003e\n\n      \u003ctd\u003eWood, light metal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eConnectivity\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eBluetooth (Mirka OS)\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eFAQ - Mirka DEROS II 325\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. Which is the best Mirka sander?\u003c\/h3\u003e\n\u003cp\u003eIt all depends on the usage. For \u003cstrong\u003esanding flat surfaces and bodywork\u003c\/strong\u003e, the \u003cstrong\u003eDEROS II\u003c\/strong\u003e is the absolute reference in the Mirka range.\u003c\/p\u003e\n\u003cp\u003eIf you are working on curved surfaces or hard-to-reach areas, the \u003cstrong\u003eMirka DEROS 353\u003c\/strong\u003e (77 mm pad) will be more suitable. For large surfaces, the \u003cstrong\u003eDEROS II 5650\u003c\/strong\u003e with its 150 mm pad takes the advantage.\u003c\/p\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e2. Which is the best orbital sander?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II\u003c\/strong\u003e is among the best electric orbital sanders on the professional market. It stands out for its \u003cstrong\u003ebrushless motor\u003c\/strong\u003e, low vibration, and compatibility with the Mirka integrated extraction system.\u003c\/p\u003e\n\u003cp\u003eCompared to competitors like the \u003cstrong\u003eFestool ETSC 125\u003c\/strong\u003e or the \u003cstrong\u003eBosch GEX 125\u003c\/strong\u003e, the DEROS II holds up on durability, ergonomics, and \u003cstrong\u003esanding precision\u003c\/strong\u003e. Its main asset remains native integration with Mirka Abranet abrasives.\u003c\/p\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e3. Who manufactures Mirka?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMirka\u003c\/strong\u003e is a Finnish company founded in 1943, belonging to the \u003cstrong\u003eKWH Group\u003c\/strong\u003e. Its headquarters and main factories are based in \u003cstrong\u003eJeppo, Finland\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eMirka is recognized worldwide for its \u003cstrong\u003einnovative abrasives\u003c\/strong\u003e and electric sanding tools. The brand is particularly present in the automotive, aeronautics, and high-end woodworking industries.\u003c\/p\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e4. What is the difference between the DEROS II 325 and the DEROS II 5650?\u003c\/h3\u003e\n\u003cp\u003eThe main difference is the \u003cstrong\u003epad diameter\u003c\/strong\u003e and the working orbit.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 325\u003c\/strong\u003e has a \u003cstrong\u003e125 mm\u003c\/strong\u003e pad with a 3 mm orbit, ideal for \u003cstrong\u003eprecision sanding\u003c\/strong\u003e, delicate areas, and finishing. The \u003cstrong\u003eDEROS II 5650\u003c\/strong\u003e features a \u003cstrong\u003e150 mm\u003c\/strong\u003e pad with a 5 mm orbit for faster material removal on large surfaces.\u003c\/p\u003e\n\u003cp\u003eIn summary: the 325 for \u003cstrong\u003efinesse and precision\u003c\/strong\u003e, the 5650 for \u003cstrong\u003eproductivity on large surfaces\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Mirka","offers":[{"title":"77 \/ Eccentricity 2.5","offer_id":58488311677311,"sku":"MIRKA_MID3254044","price":614.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-mirkaR-deros-ii-325.jpg?v=1789990343"},{"product_id":"ponceuse-orbitale-mirkar-deros-ii-350","title":"Mirka® DEROS II 350 orbital sander","description":"\u003ch2\u003eMirka DEROS II 350 Orbital Sander, Complete Overview\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 350\u003c\/strong\u003e is an \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e designed for professionals who refuse to compromise on finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its \u003cstrong\u003e3.5 mm orbit\u003c\/strong\u003e and brushless motor, it provides \u003cstrong\u003eprecise and consistent sanding\u003c\/strong\u003e on all surfaces, even the most delicate ones.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eLightweight, quiet, and easy to handle, it is the kind of tool you can use all day without fatigue.\u003c\/p\u003e\u003ch2\u003eWhat is the Mirka DEROS II 350 orbital sander?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 350\u003c\/strong\u003e is a compact \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e, designed for precision sanding on flat or slightly curved surfaces. Its \u003cstrong\u003eØ 77 mm\u003c\/strong\u003e pad and \u003cstrong\u003e3.5 mm\u003c\/strong\u003e orbit make it a tool tailored for fine finishing and working on small areas.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is part of Mirka's \u003cstrong\u003eDEROS II\u003c\/strong\u003e range, a direct evolution of the first-generation DEROS. With its brushless motor, electronic speed control, and low vibration, the DEROS II 350 is designed for intensive use without fatigue.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we particularly recommend it for automotive bodywork, fine cabinetry, and sanding complex parts where control over the sanding motion is essential.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eMirka: Finnish manufacturer specializing in dust-free sanding\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eMirka\u003c\/strong\u003e is a company founded in 1943 in Finland. It is now recognized worldwide as a pioneer in \u003cstrong\u003eclean sanding\u003c\/strong\u003e, that is to say, dust-free.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eTheir flagship innovation: \u003cstrong\u003eopen-structure\u003c\/strong\u003e abrasives (like Abranet), combined with machines featuring \u003cstrong\u003ehigh-performance integrated extraction\u003c\/strong\u003e. The result is less clogging, a cleaner surface, and a healthier work environment.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eMirka designs both the machines and the abrasives. This consistency between tool and consumable is a real advantage compared to manufacturers who only master part of the chain, such as \u003cstrong\u003eFestool\u003c\/strong\u003e or \u003cstrong\u003eBosch\u003c\/strong\u003e, which also offer complete solutions but with different philosophies.\u003c\/p\u003e\u003ch2\u003eTechnical specifications of the Mirka DEROS II 350CV\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 350CV\u003c\/strong\u003e is a compact electric orbital sander designed for fine sanding work on small surfaces. It runs on 230 V mains power and develops \u003cstrong\u003e350 W\u003c\/strong\u003e of power.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts speed is electronically adjustable from \u003cstrong\u003e4,000 to 10,000 rpm\u003c\/strong\u003e. The constant speed control under load ensures a steady rate, even when applying firm pressure to the workpiece.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eØ 77 mm pad and 5.0 mm random orbit: what is it used for?\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e77 mm diameter pad\u003c\/strong\u003e is the compact size in the DEROS II range. It allows access to tight areas inaccessible to 125 or 150 mm pads: corners, moldings, door panels, and complex bodywork areas.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e5.0 mm random orbit\u003c\/strong\u003e is a balanced compromise. It removes more material than a 3 mm orbit while leaving a cleaner finish than an 8 mm one. It is the ideal setting for \u003cstrong\u003eintermediate sanding and finishing\u003c\/strong\u003e on wood, varnish, or primer.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003ePower: \u003cstrong\u003e350 W\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003ePad: \u003cstrong\u003eØ 77 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eOrbit: \u003cstrong\u003e5.0 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eSpeed: \u003cstrong\u003e4,000-10,000 rpm\u003c\/strong\u003e (adjustable)\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: 230 V \/ 50 Hz\u003c\/li\u003e\n\n  \u003cli\u003eAbrasive attachment: \u003cstrong\u003eVelcro\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 350CV\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eØ 77 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing tight areas, bodywork, wood\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 550CV\u003c\/td\u003e\n\n      \u003ctd\u003eØ 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing medium surfaces, bodywork\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 650CV\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing large surfaces, bodywork\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS 125 REQ\u003c\/td\u003e\n\n      \u003ctd\u003eØ 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e250 W\u003c\/td\u003e\n\n      \u003ctd\u003eUltra-fine finishing, cabinetry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eComparison: Mirka DEROS II 350 versus other orbital sanders on the market\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 350\u003c\/strong\u003e stands out for its brushless motor, low weight (~900 g), and compatibility with the Mirka central extraction system. Against the competition, it clearly holds its own.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere is a direct comparison with four orbital sanders commonly used in workshops and body shops:\u003c\/p\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003eIntegrated extraction\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 350\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e3.5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~900 g\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eYes (Mirka system)\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, bodywork, wood\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 550\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~950 g\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eYes (Mirka system)\u003c\/td\u003e\n\n      \u003ctd\u003eStock removal, surfacing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/3\u003c\/td\u003e\n\n      \u003ctd\u003e3.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1,100 g\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eYes (Festool CT)\u003c\/td\u003e\n\n      \u003ctd\u003eWood finishing, lacquer\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 125-150 AVE\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 \/ 4.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1,500 g\u003c\/td\u003e\n\n      \u003ctd\u003eBrushed\u003c\/td\u003e\n\n      \u003ctd\u003eYes (bag)\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm (polishing)\u003c\/td\u003e\n\n      \u003ctd\u003e~1,350 g\u003c\/td\u003e\n\n      \u003ctd\u003eBrushed\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith a \u003cstrong\u003e3.5 mm orbit\u003c\/strong\u003e, the DEROS II 350 is built for \u003cstrong\u003eprecise finishing\u003c\/strong\u003e: it avoids sanding marks and works without tearing the material.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the Festool ETS EC 150\/3, it offers a more contained weight and better ergonomics for long sessions. The Festool remains relevant for workshops already equipped with CT extractors.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBosch GEX\u003c\/strong\u003e costs less to purchase, but its brushed motor, weight, and vibrations clearly position it below for intensive or professional use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary: if the priority is \u003cstrong\u003efinishing, lightness, and durability\u003c\/strong\u003e in professional use, the Mirka DEROS II 350 does not really have a direct competitor in this orbit range.\u003c\/p\u003e\u003ch2\u003eCompatible accessories and integrated extraction system\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 350\u003c\/strong\u003e is designed to work with the entire Mirka accessory ecosystem. It accepts \u003cstrong\u003eMirka Velcro-backed abrasives\u003c\/strong\u003e in 150 mm format, notably the \u003cstrong\u003eAbranet\u003c\/strong\u003e, \u003cstrong\u003eGalaxy\u003c\/strong\u003e, and \u003cstrong\u003eBasecut\u003c\/strong\u003e ranges.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eintegrated extraction\u003c\/strong\u003e is one of the strong points of this machine. The perforated backing pad and Abranet net abrasives work in synergy to evacuate \u003cstrong\u003edust directly at the source\u003c\/strong\u003e, without leaving residue on the surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor optimal extraction, the DEROS II 350 connects to a \u003cstrong\u003eMirka vacuum unit\u003c\/strong\u003e (such as the DE 1230 L AFC or equivalent) via a central hose. This pairing ensures a clean workstation and reduces exposure to fine dust.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the directly compatible accessories:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMirka Abranet abrasives\u003c\/strong\u003e, full net, maximum extraction\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMirka Galaxy abrasives\u003c\/strong\u003e, general use, good service life\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMirka Basecut abrasives\u003c\/strong\u003e, rapid stock removal\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMirka replacement backing pads\u003c\/strong\u003e, soft or rigid depending on the support\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMirka hoses and fittings\u003c\/strong\u003e, direct connection to the vacuum\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompatibility with standard 150 mm abrasives from other manufacturers (Klingspor, Norton, 3M) remains possible, provided the perforation matches the backing pad.\u003c\/p\u003e\u003ch2\u003eApplications and sectors for the DEROS II 350\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 350\u003c\/strong\u003e is a compact random orbital sander designed for \u003cstrong\u003eprecision sanding\u003c\/strong\u003e work on small surfaces and hard-to-reach areas.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e77 mm\u003c\/strong\u003e pad and 3.5 mm orbit make it a tool tailored for fine finishing, where a standard sander would be too bulky.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the main areas where it excels:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAutomotive bodywork\u003c\/strong\u003e: touch-ups, preparation before painting, sanding localized areas\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eJoinery and cabinetry\u003c\/strong\u003e: finishing on small parts, moldings, corners\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eYacht and composite industry\u003c\/strong\u003e: sanding hulls, gelcoat, laminates\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eRenovation and building\u003c\/strong\u003e: sanding baseboards, frames, small surfaces\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePlastics and metallurgy\u003c\/strong\u003e: finishing on molded or machined parts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the \u003cstrong\u003eDEROS II 550\u003c\/strong\u003e (5 mm orbit, 125 mm pad), the 350 prioritizes \u003cstrong\u003eprecision and maneuverability\u003c\/strong\u003e rather than sanding throughput.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 350\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e77 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3.5 mm\u003c\/td\u003e\n\n      \u003ctd\u003ePrecise finishing, small surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 550\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eLarge surface sanding, bodywork\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETSC 125\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood and lacquer finishing, versatile use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 75E\u003c\/td\u003e\n\n      \u003ctd\u003e75 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003ePolishing and finishing tight areas\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the DEROS II 350 to professionals who are looking for a \u003cstrong\u003ehigh-end finishing\u003c\/strong\u003e tool for complex geometries or small parts.\u003c\/p\u003e\u003ch2\u003eFAQ - Mirka DEROS II 350 orbital sander\u003c\/h2\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e1. Which is the best Mirka orbital sander?\u003c\/h3\u003e\n\u003cp\u003eThe answer depends on the usage. For \u003cstrong\u003eprecise finishing work on small surfaces\u003c\/strong\u003e, the \u003cstrong\u003eDEROS II 350\u003c\/strong\u003e is hard to beat: 77 mm pad, 3 mm orbit, fine control.\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003elarge flat surfaces\u003c\/strong\u003e (bodywork, industrial joinery), the DEROS II 5650 with its 150 mm pad and 5 mm orbit will be more productive.\u003c\/p\u003e\n\u003cp\u003eAt Dagobert Industrie, we offer both references to cover all professional needs.\u003c\/p\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e2. Who manufactures Mirka?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMirka is a Finnish company\u003c\/strong\u003e founded in 1943, a subsidiary of the KWH Group. Its headquarters are in Jeppo, Finland.\u003c\/p\u003e\n\u003cp\u003eMirka is recognized worldwide for its \u003cstrong\u003edust-free abrasives\u003c\/strong\u003e and electronic sanders. The DEROS (Direct Electric Random Orbital Sander) range is manufactured in Europe with high-quality components.\u003c\/p\u003e\n\u003cp\u003eThe brand is a reference in the \u003cstrong\u003ebodywork, joinery, industrial, and aeronautical\u003c\/strong\u003e sectors.\u003c\/p\u003e\n\n\u003ch3\u003e3. What is the difference between the DEROS II 350 and the DEROS II 5650?\u003c\/h3\u003e\n\u003cp\u003eBoth machines share the same Mirka electronic technology, but their features are intended for distinct uses.\u003c\/p\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003eDEROS II 350\u003c\/th\u003e\n\n      \u003cth\u003eDEROS II 5650\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePad diameter\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e77 mm\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eOrbit\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e3 mm\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eSpeed (rpm)\u003c\/td\u003e\n\n      \u003ctd\u003e3,000-10,000\u003c\/td\u003e\n\n      \u003ctd\u003e3,000-10,000\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMain use\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFinishing, tight areas\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eLarge surfaces, stock removal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eWeight\u003c\/td\u003e\n\n      \u003ctd\u003e~0.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003e~1.1 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eIdeal for\u003c\/td\u003e\n\n      \u003ctd\u003eTouch-ups, fine cabinetry\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork, panels\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e4. What is the best orbital sander for professional use?\u003c\/h3\u003e\n\u003cp\u003eFor \u003cstrong\u003eintensive professional use\u003c\/strong\u003e, you need a machine with electronic speed control, integrated dust extraction, and a brushless motor. The \u003cstrong\u003eDEROS II 350 ticks all these boxes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eCompared to competitors like the \u003cstrong\u003eFestool ETSC 125\u003c\/strong\u003e or the \u003cstrong\u003eBosch GEX 125-150 AVE\u003c\/strong\u003e, the DEROS II 350 stands out for its \u003cstrong\u003every low weight\u003c\/strong\u003e and its particularly effective dust management thanks to the Mirka system.\u003c\/p\u003e\n\u003cp\u003eFor professionals working on \u003cstrong\u003efinishing or complex parts\u003c\/strong\u003e, the DEROS II 350 remains one of the best choices on the market.\u003c\/p\u003e","brand":"Mirka","offers":[{"title":"77 \/ Eccentricity 5.0","offer_id":58488311710079,"sku":"MIRKA_MID3504044","price":614.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-mirkaR-deros-ii-350.jpg?v=1789990344"},{"product_id":"ponceuse-orbitale-mirkar-deros-ii-550","title":"Mirka® DEROS II 550 orbital sander","description":"\u003ch2\u003eMirka DEROS II 550 Orbital Sander, Complete Overview\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 550\u003c\/strong\u003e is an \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e designed for professionals who refuse to compromise on finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eLightweight, quiet, and precise, it is the go-to tool for \u003cstrong\u003eautomotive sanding jobs\u003c\/strong\u003e, surface preparation, and \u003cstrong\u003ewood or metal finishing\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its \u003cstrong\u003e5 mm orbit\u003c\/strong\u003e and brushless motor, it provides \u003cstrong\u003econstant power\u003c\/strong\u003e without excessive vibration, even during prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official \u003cstrong\u003eMirka\u003c\/strong\u003e distributor, you have access to the full range, supported by local technical expertise.\u003c\/p\u003e\u003ch2\u003eWhat is the Mirka DEROS II 550 orbital sander?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 550\u003c\/strong\u003e is an electric random orbital sander designed for professionals in body shops, carpentry, and surface treatment.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt succeeds the first-generation DEROS with notable improvements: better ergonomics, an optimized motor, and more precise electronic control.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e125 mm backing pad\u003c\/strong\u003e and \u003cstrong\u003e5 mm orbital throw\u003c\/strong\u003e (hence the \"550\" in its name) make it a versatile tool, capable of sanding efficiently without burning the surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eDetailed Technical Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003ePad diameter: \u003cstrong\u003e125 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eOrbital throw: \u003cstrong\u003e5 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eNo-load speed: 3,000-10,000 rpm (adjustable)\u003c\/li\u003e\n\n  \u003cli\u003ePower input: \u003cstrong\u003e350 W\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWeight: approximately \u003cstrong\u003e0.9 kg\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eDust extraction connection: 27 mm\u003c\/li\u003e\n\n  \u003cli\u003eAbrasive attachment: \u003cstrong\u003eVelcro (hook-and-loop)\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe built-in \u003cstrong\u003eelectronic variable speed control\u003c\/strong\u003e allows you to adapt the speed to the material being worked on: wood, metal, composite, paint, or varnish.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe DEROS II 550 is compatible with all \u003cstrong\u003eMirka Abranet and Galaxy abrasives\u003c\/strong\u003e, which guarantees optimal extraction thanks to the multi-hole discs.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this sander as an essential benchmark for workshops that demand precision, comfort, and daily durability.\u003c\/p\u003e\u003ch2\u003ePerformance and power: what the DEROS II 550 brings to the job site\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 550\u003c\/strong\u003e features a \u003cstrong\u003e550 W\u003c\/strong\u003e brushless motor. This is sufficient for tackling hard surfaces without losing consistency.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ebrushless\u003c\/strong\u003e system reduces mechanical wear. Result: less maintenance, a longer service life, and stable torque over time.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe speed is adjustable from \u003cstrong\u003e4,000 to 10,000 rpm\u003c\/strong\u003e. You can easily adapt the aggressiveness to the material: raw wood, primer, varnish, metal, or composite.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e5 mm orbit\u003c\/strong\u003e offers a good balance between material removal and finish quality. It is suitable for both heavy-duty sanding and preparation before painting.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts low weight, approximately \u003cstrong\u003e900 g\u003c\/strong\u003e, reduces fatigue during prolonged use. On an automotive or woodworking job site, that makes all the difference over a full day.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003ePrimary Use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 550\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e550 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~900 g\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile sanding, finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 650\u003c\/td\u003e\n\n      \u003ctd\u003e650 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~950 g\u003c\/td\u003e\n\n      \u003ctd\u003eHarder surfaces, intensive material removal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1,100 g\u003c\/td\u003e\n\n      \u003ctd\u003eWood finishing, fine cabinetry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 150 AC\u003c\/td\u003e\n\n      \u003ctd\u003e370 W\u003c\/td\u003e\n\n      \u003ctd\u003e4 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1,200 g\u003c\/td\u003e\n\n      \u003ctd\u003eWood sanding, occasional use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the competition, the DEROS II 550 stands out for its \u003cstrong\u003epower-to-weight ratio\u003c\/strong\u003e. It remains light where other tools with similar power become heavy in the hand.\u003c\/p\u003e\u003ch2\u003eMirka DEROS II 550 orbital sander vs. competitors: comparison table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eComparison with other orbital sanders on the market\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 550\u003c\/strong\u003e is positioned in the high-end segment of electric orbital sanders. Here is how it compares to its main direct competitors.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eManufacturer\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003eKey Strength\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDEROS II 550\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eMirka\u003c\/td\u003e\n\n      \u003ctd\u003e550 W electric\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.0 kg\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eLightweight, low vibration, integrated extraction\u003c\/strong\u003e\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eETS 150\/3 EQ\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.2 kg\u003c\/td\u003e\n\n      \u003ctd\u003eVery fine finishing, Festool ecosystem\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eETS 150\/5 EQ\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.2 kg\u003c\/td\u003e\n\n      \u003ctd\u003eVersatility: finishing\/heavy-duty\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGEX 125-150 AVE\u003c\/td\u003e\n\n      \u003ctd\u003eBosch Pro\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e4 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.5 kg\u003c\/td\u003e\n\n      \u003ctd\u003ePrice-to-performance ratio, robustness\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRO 150 FEQ\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003e720 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003eEccentric + rotary mode, high material removal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 550\u003c\/strong\u003e stands out for its \u003cstrong\u003eexceptionally low weight\u003c\/strong\u003e of around 1 kg. This is a decisive advantage for long-duration work: automotive bodywork, sanding large surfaces, lacquer finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn terms of power, its \u003cstrong\u003e550 W\u003c\/strong\u003e surpasses the standard Festool ETS range. The speed remains stable under load thanks to the \u003cstrong\u003eelectronic regulation\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eintegrated central dust extraction\u003c\/strong\u003e is a key Mirka strength: the micro-perforated pad captures dust directly at the source, without cumbersome external bags or adapters.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the Festool RO 150, the DEROS II 550 is lighter and more economical in use, even though it does not offer the rotary mode. For \u003cstrong\u003efine sanding and finishing\u003c\/strong\u003e, it remains the most logical choice.\u003c\/p\u003e\u003ch2\u003eAccessories and consumables compatible with the DEROS II 550\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 550\u003c\/strong\u003e uses a 150 mm pad. It accepts all Mirka Velcro-backed abrasives, which simplifies changes during work.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe benchmark abrasive for this machine is \u003cstrong\u003eMirka ABRANET\u003c\/strong\u003e. Its net structure allows for optimal extraction and reduces clogging. Result: a significantly longer service life than conventional abrasives.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor finishing varnish or dual-coat paint, \u003cstrong\u003eMirka BASECUT\u003c\/strong\u003e and \u003cstrong\u003eMirka GOLDFLEX SOFT\u003c\/strong\u003e are particularly suitable. They offer a clean cut without risk of burning on sensitive surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eavailable grits\u003c\/strong\u003e cover a wide spectrum:\u003c\/p\u003e\n\u003cul\u003e\n\n  \u003cli\u003eP80 to P180 for heavy-duty sanding and shaping\u003c\/li\u003e\n\n  \u003cli\u003eP220 to P400 for preparation before priming\u003c\/li\u003e\n\n  \u003cli\u003eP500 to P1000 for finishing and intermediate sanding\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003esanding pad\u003c\/strong\u003e is replaceable. Mirka offers several hardness levels (soft, medium, hard) depending on the surface profile. A soft pad follows contours better, while a hard pad is essential for flat surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor extraction, the DEROS II 550 connects directly to \u003cstrong\u003eMirka DE and CV extractors\u003c\/strong\u003e via the standard 27 mm connector. It remains compatible with most extractors on the market equipped with the same connector.\u003c\/p\u003e\u003ch2\u003eWhy choose the Mirka DEROS II 550 for dust-free sanding?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 550\u003c\/strong\u003e is designed from the ground up for clean sanding. Its integrated extraction system captures dust at the source, before it disperses into the air.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe 150 mm pad is drilled with \u003cstrong\u003e67 holes\u003c\/strong\u003e distributed across the entire surface. Result: a homogeneous extraction flow, with no dead zones, regardless of the tool's position.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e550 W\u003c\/strong\u003e brushless motor maintains constant speed even under load. No loss of RPM during the final sanding stages, no marks on the surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e5 mm\u003c\/strong\u003e orbit offers a good balance between material removal and finish quality. It is suitable for both heavy-duty sanding and preparation before painting.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe DEROS II 550 connects to any \u003cstrong\u003eMirka-compatible vacuum\u003c\/strong\u003e or industrial extractor via the standard fitting. It integrates easily into an existing workstation.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003ePad diameter\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePrimary Use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 550\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless 550 W\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, paint prep\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 650\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless 650 W\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive heavy-duty, sustained use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless 400 W\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood finishing, light automotive\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 150 AC\u003c\/td\u003e\n\n      \u003ctd\u003eBrushed 350 W\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eOccasional use, advanced DIY\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the DEROS II 550 for automotive, woodworking, and industrial finishing workshops that want to \u003cstrong\u003eeliminate airborne dust\u003c\/strong\u003e without compromising productivity.\u003c\/p\u003e\u003ch2\u003eFAQ - Mirka DEROS II 550 orbital sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between the DEROS II 550 and the DEROS II 650?\u003c\/h3\u003e\n\u003cp\u003eThe main difference is the \u003cstrong\u003epad size\u003c\/strong\u003e: the 550 uses a \u003cstrong\u003e125 mm\u003c\/strong\u003e pad, while the 650 uses a 150 mm pad.\u003c\/p\u003e\n\u003cp\u003eThe 550 is more maneuverable, making it ideal for \u003cstrong\u003ecurved areas, edges, and small surfaces\u003c\/strong\u003e. The 650 covers large, flat surfaces more quickly.\u003c\/p\u003e\n\u003cp\u003eFor automotive or fine woodworking, the \u003cstrong\u003eDEROS II 550 is often preferred\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. Is the DEROS II 550 compatible with Mirka Abranet abrasives?\u003c\/h3\u003e\n\u003cp\u003eYes, it is \u003cstrong\u003efully compatible with Mirka abrasives\u003c\/strong\u003e: Abranet, Abranet Ace, Galaxy, Iridium, and more.\u003c\/p\u003e\n\u003cp\u003eThe 125 mm Velcro pad accepts all \u003cstrong\u003ehook-and-loop sanding discs\u003c\/strong\u003e on the market, not just Mirka’s.\u003c\/p\u003e\n\u003cp\u003eThat said, Mirka abrasives are optimized to work with the DEROS II's \u003cstrong\u003eintegrated extraction system\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Can the DEROS II 550 be used without extraction?\u003c\/h3\u003e\n\u003cp\u003eTechnically yes, but it is \u003cstrong\u003ehighly discouraged\u003c\/strong\u003e. The DEROS II 550 is designed around its \u003cstrong\u003eintegrated extraction\u003c\/strong\u003e: without it, performance drops and dust accumulates.\u003c\/p\u003e\n\u003cp\u003eConnecting a vacuum or extraction unit remains \u003cstrong\u003eessential for professional use\u003c\/strong\u003e and for preserving the machine's service life.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. What orbital speed should I choose for the DEROS II 550?\u003c\/h3\u003e\n\u003cp\u003eThe machine offers \u003cstrong\u003e6 adjustable speeds\u003c\/strong\u003e, from 4,000 to 10,000 rpm.\u003c\/p\u003e\n\u003cp\u003eIn practice: \u003cstrong\u003elow speed\u003c\/strong\u003e for sensitive materials (lacquers, fresh primer), \u003cstrong\u003ehigh speed\u003c\/strong\u003e for material removal on wood or metal.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eelectronic regulation\u003c\/strong\u003e maintains constant speed under load, which prevents marks and ensures a uniform result.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Does the DEROS II 550 replace a standard eccentric sander?\u003c\/h3\u003e\n\u003cp\u003eIn the majority of cases, yes. The \u003cstrong\u003ebrushless technology\u003c\/strong\u003e and 5 mm orbit provide a level of finish comparable to a high-end pneumatic sander.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for \u003cstrong\u003eautomotive bodywork, carpentry, industrial painting\u003c\/strong\u003e, and surface preparation in general.\u003c\/p\u003e\n\u003cp\u003eFor very heavy material removal work, a belt sander or angle grinder remains more appropriate.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. At Dagobert Industrie, what accessory do you recommend with the DEROS II 550?\u003c\/h3\u003e\n\u003cp\u003eWe recommend pairing it with a \u003cstrong\u003eMirka extraction unit\u003c\/strong\u003e (such as the DE or CEROS series) to fully exploit the dust-free system.\u003c\/p\u003e\n\u003cp\u003eRegarding abrasives, \u003cstrong\u003eMirka Abranet Ace 125 mm discs\u003c\/strong\u003e are an excellent starting point: long service life, effective anti-clogging, and suitable for most materials.\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003eMirka starter kit\u003c\/strong\u003e with an assortment of grits (P80 to P320) allows you to cover all sanding stages without switching machines.\u003c\/p\u003e","brand":"Mirka","offers":[{"title":"125 \/ Eccentricity 5.0","offer_id":58488312725887,"sku":"MIRKA_MID5504044","price":614.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-mirkaR-deros-ii-550.jpg?v=1789990345"},{"product_id":"ponceuse-orbitale-mirkar-deros-ii-5650","title":"Mirka® DEROS II 5650 orbital sander","description":"\u003ch2\u003eMirka DEROS II 5650 orbital sander: the benchmark for handheld power sanding\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 5650\u003c\/strong\u003e is an \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e built for professionals who refuse to compromise on finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its brushless motor, low vibration, and lightweight design, it handles long \u003cstrong\u003esanding\u003c\/strong\u003e sessions without fatigue or loss of performance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its \u003cstrong\u003e150 mm backing pad\u003c\/strong\u003e and 5 mm orbital stroke, it is just as well-suited to automotive bodywork as it is to wood or composite surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is a tool built to last, and one you can find at \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, backed by the expert advice and service to match.\u003c\/p\u003e\u003ch2\u003ePresentation of the Mirka DEROS II 5650 orbital sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 5650\u003c\/strong\u003e is a high-end electric random orbital sander designed for demanding professionals in the construction, automotive, and industrial sectors. It succeeds the original DEROS with concrete improvements to handling, power, and durability.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e125 mm backing pad\u003c\/strong\u003e and \u003cstrong\u003e5 mm orbital throw\u003c\/strong\u003e make it a versatile tool: suitable for fine finishing, moderate stock removal, and surface preparation prior to painting or varnishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we particularly recommend it for bodywork tasks and flat or slightly curved surfaces where a consistent result is critical.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDetailed technical specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eBacking pad diameter: \u003cstrong\u003e125 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eOrbital throw: \u003cstrong\u003e5 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eNo-load speed: \u003cstrong\u003e3,000-10,000 rpm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003ePower input: \u003cstrong\u003e350 W\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWeight: approx. \u003cstrong\u003e0.9 kg\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eAbrasive attachment: \u003cstrong\u003eVelcro (hook-and-loop)\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eIntegrated dust extraction: \u003cstrong\u003eyes\u003c\/strong\u003e, extractor compatible\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: \u003cstrong\u003e230 V \/ 50 Hz\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe DEROS II 5650 stands out for its \u003cstrong\u003elow weight\u003c\/strong\u003e and \u003cstrong\u003ereduced vibration\u003c\/strong\u003e, two major assets for long work sessions. Operator fatigue is significantly reduced compared to conventional orbital sanders of the same power.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eelectronic speed controller\u003c\/strong\u003e maintains constant speed under load, which guarantees a homogeneous result over the entire surface, even when applying heavy pressure.\u003c\/p\u003e\n\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eOrbital throw\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 5650\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~0.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing \/ bodywork \/ industry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 6650\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.1 kg\u003c\/td\u003e\n\n      \u003ctd\u003eLarge surfaces \/ construction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 125\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.0 kg\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing \/ cabinetry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch PEX 300 AE\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.5 kg\u003c\/td\u003e\n\n      \u003ctd\u003eSemi-professional use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003ePerformance and power: what sets the Mirka DEROS II 5650 apart\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 5650\u003c\/strong\u003e features a \u003cstrong\u003e350 W\u003c\/strong\u003e brushless motor that delivers constant power, even under load. No rpm drop at the end of a stroke.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe speed range is from \u003cstrong\u003e4,000 to 10,000 rpm\u003c\/strong\u003e, adjustable via the electronic dial. You can adapt the speed to the material: softwood, varnish, composite, or metal.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e5 mm orbit\u003c\/strong\u003e offers a good balance between material removal and surface quality. It is the reference value for universal sanding in bodywork and carpentry.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNVH system\u003c\/strong\u003e (vibration and noise reduction) is particularly refined on this version II. The vibration level drops to \u003cstrong\u003e2.5 m\/s²\u003c\/strong\u003e, well below the statutory daily exposure thresholds.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe integrated \u003cstrong\u003eBluetooth connection\u003c\/strong\u003e allows the machine to be controlled via the Mirka app. Usage tracking, parameter adjustment, and maintenance alerts: everything can be managed remotely.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eVibration\u003c\/th\u003e\n\n      \u003cth\u003eConnectivity\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 5650\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 m\/s²\u003c\/td\u003e\n\n      \u003ctd\u003eBluetooth\u003c\/td\u003e\n\n      \u003ctd\u003eUniversal sanding \/ bodywork\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 3650\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003e2.0 m\/s²\u003c\/td\u003e\n\n      \u003ctd\u003eBluetooth\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing \/ surface leveling\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e3.0 m\/s²\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eWood sanding \/ varnish\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 150 AC\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e280 W\u003c\/td\u003e\n\n      \u003ctd\u003e5.5 m\/s²\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eCompatibility and accessories for the DEROS II 5650\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003eRecommended backing pads, interfaces, and consumables\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 5650\u003c\/strong\u003e is designed to work with \u003cstrong\u003eMirka backing pads\u003c\/strong\u003e with central mounting, in 125 mm diameter. The original pad supplied with the machine is suitable for the majority of common applications.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor curved surfaces or complex bodywork, a \u003cstrong\u003esoft pad\u003c\/strong\u003e (hardness 10 or 20) significantly improves contour following. The hard pad remains preferable on flat surfaces for more aggressive material removal.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eBetween the pad and the abrasive, a \u003cstrong\u003eMirka foam interface\u003c\/strong\u003e (3 or 6 mm thick) absorbs residual vibrations and protects the backing. It is particularly useful for finishing on varnish or gel coat.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAs for abrasives, the DEROS II 5650 is optimized for \u003cstrong\u003eMirka Abranet, Galaxy, and Iridium discs\u003c\/strong\u003e in 125 mm, 8 holes, Velcro attachment. These references cover all uses:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAbranet\u003c\/strong\u003e, sanding wood, MDF, filler, excellent dust extraction\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eGalaxy\u003c\/strong\u003e, bodywork, metal, plastic, clog resistance\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eIridium\u003c\/strong\u003e, paint and varnish finishing, fine to very fine grits\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eAbrasive\u003c\/th\u003e\n\n      \u003cth\u003eMaterial\u003c\/th\u003e\n\n      \u003cth\u003eCommon grits\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka Abranet\u003c\/td\u003e\n\n      \u003ctd\u003eWood, MDF, filler\u003c\/td\u003e\n\n      \u003ctd\u003eP80, P240\u003c\/td\u003e\n\n      \u003ctd\u003eRoughing to wood finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka Galaxy\u003c\/td\u003e\n\n      \u003ctd\u003eMetal, plastic, bodywork\u003c\/td\u003e\n\n      \u003ctd\u003eP80, P320\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork and metal sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka Iridium\u003c\/td\u003e\n\n      \u003ctd\u003eVarnish, paint, gel coat\u003c\/td\u003e\n\n      \u003ctd\u003eP320, P1000\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing and polish prep\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eØ 27 mm vacuum connection\u003c\/strong\u003e is compatible with most dust extractors on the market. For optimal extraction, an M or L class extractor is recommended.\u003c\/p\u003e\u003ch2\u003eComparison: Mirka DEROS II 5650 versus other orbital sanders on the market\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 5650\u003c\/strong\u003e stands out as a serious benchmark in the handheld orbital sander category. But how does it compare to the competition?\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts main asset: a \u003cstrong\u003ebrushless motor\u003c\/strong\u003e coupled with onboard electronics that maintain constant speed under load. This is a concrete advantage over carbon-brush motor models like the \u003cstrong\u003eFestool ETS 150\/3\u003c\/strong\u003e or the Bosch GEX 150 AC, which suffer more speed loss under strain.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e5 mm orbital stroke\u003c\/strong\u003e with a 150 mm pad offers a good compromise between material removal and finish quality. By comparison, the Festool ETS EC 150\/3 offers an identical stroke, but at a significantly higher price point.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003eOrbital stroke\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 5650\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.0 kg\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork, wood, finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/3\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.2 kg\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, lacquer\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 150 AC\u003c\/td\u003e\n\n      \u003ctd\u003eCarbon-brush\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.5 kg\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.3 kg\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 5650 stands out with its featherweight\u003c\/strong\u003e of around 1 kg. During an intensive workday, fatigue is significantly reduced compared to a Bosch GEX 150 AC, which is 50% heavier.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFinally, the \u003cstrong\u003eBluetooth connectivity\u003c\/strong\u003e with the Mirka app allows real-time tracking of machine parameters, a feature missing on almost all competing models in this price range.\u003c\/p\u003e\u003ch2\u003eFAQ - Mirka DEROS II 5650\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between the DEROS II 5650 and the DEROS II 5650CV?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 5650\u003c\/strong\u003e operates at a fixed speed. The CV (Constant Velocity) version automatically maintains rotation speed under load, which prevents slowing down when applying heavy pressure. For intensive use on large surfaces, the CV is recommended.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. Is the DEROS II 5650 compatible with other brands' abrasives?\u003c\/h3\u003e\n\u003cp\u003eYes. It accepts any \u003cstrong\u003eØ 150 mm, 6-hole\u003c\/strong\u003e or multi-hole abrasive. That said, Mirka designs its abrasives (Abranet, Galaxy, Iridium) specifically to optimize extraction and lifespan with this machine. Results are significantly better with \u003cstrong\u003eMirka abrasives\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Can it be used without dust extraction?\u003c\/h3\u003e\n\u003cp\u003eTechnically yes, but it is not advised. The \u003cstrong\u003eDEROS II 5650 is designed to operate in a closed circuit\u003c\/strong\u003e with extraction. Without it, the pores of the abrasive quickly clog, the lifespan of the discs drops, and surface quality degrades.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Which orbit to choose: 5 mm or 8 mm?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e5 mm\u003c\/strong\u003e orbit (model 5650) offers a finer finish, ideal for paint, varnish, and delicate surfaces. The \u003cstrong\u003e8 mm\u003c\/strong\u003e orbit (model 8150) removes more material and is suited to sanding primer or raw wood. For bodywork and lacquered finishes, 5 mm is the standard.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Is the DEROS II 5650 suitable for amateur use?\u003c\/h3\u003e\n\u003cp\u003eIt is a \u003cstrong\u003eprofessional\u003c\/strong\u003e tool, designed for intensive daily use. An amateur can certainly use it, but they are paying for a level of robustness and ergonomics they may not always fully exploit. If the budget is tight, entry-level alternatives exist. If finish quality is the priority, the DEROS II remains \u003cstrong\u003eunbeatable in its category\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. What dust extraction should be used with the DEROS II 5650?\u003c\/h3\u003e\n\u003cp\u003eMirka recommends its own extractors (\u003cstrong\u003eMirka DE, DECO or AIR\u003c\/strong\u003e) to guarantee optimal airflow. An M or L class extractor with flow ≥ 170 m³\/h is suitable. The important thing: use an extractor with an \u003cstrong\u003eauto-start socket\u003c\/strong\u003e to trigger suction as soon as the machine runs.\u003c\/p\u003e","brand":"Mirka","offers":[{"title":"150 \/ Eccentricity 5.0","offer_id":58488313217407,"sku":"MIRKA_MID5650404CA","price":697.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-mirkaR-deros-ii-5650.jpg?v=1789990346"},{"product_id":"ponceuse-orbitale-mirkar-deros-ii-625","title":"Mirka® DEROS II 625 orbital sander","description":"\u003ch2\u003eMirka DEROS II 625 orbital sander, Precision, power, and comfort for your sanding needs\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e is an \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e designed for professionals who refuse to compromise on finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its brushless motor, \u003cstrong\u003e2.5 mm orbit\u003c\/strong\u003e, and optimized weight, every detail is engineered for \u003cstrong\u003eprecise and comfortable sanding\u003c\/strong\u003e, even during long sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompatible with the \u003cstrong\u003eMirka integrated dust extraction\u003c\/strong\u003e system, it keeps dust at your workstation to an absolute minimum.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eA benchmark tool for \u003cstrong\u003eautomotive bodywork, woodworking, and composite surfaces\u003c\/strong\u003e, available at \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eIntroducing the Mirka DEROS II 625: a next-generation orbital sander\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e is an electric random orbital sander built for demanding professionals. It succeeds the first-generation DEROS by enhancing every key feature: power, precision, and ergonomics.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e2.5 mm orbit\u003c\/strong\u003e and \u003cstrong\u003e125 mm backing pad\u003c\/strong\u003e make it a versatile tool. It is equally well-suited for automotive bodywork and lacquered surfaces as it is for wood or composite materials.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eBrushless motor and direct drive technology: the heart of the DEROS II\u003c\/h3\u003e\n\n\u003cp\u003eThe DEROS II 625 features a \u003cstrong\u003edirect drive brushless motor\u003c\/strong\u003e. No belts, no mechanical angle gears: the backing pad is driven directly by the rotor.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe practical result: fewer wearing parts, fewer vibrations transmitted to your hand, and \u003cstrong\u003econsistent speed\u003c\/strong\u003e maintained even under load. The motor's lifespan is significantly longer compared to a conventional brushed motor.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eSpeed is adjustable from \u003cstrong\u003e3,000 to 10,000 rpm\u003c\/strong\u003e via a graduated dial. The electronic control system maintains the selected speed regardless of the pressure applied to the workpiece.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003eSpeed (rpm)\u003c\/th\u003e\n\n      \u003cth\u003ePrimary usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless direct drive\u003c\/td\u003e\n\n      \u003ctd\u003e3,000-10,000\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork, wood, composites\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 650\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless direct drive\u003c\/td\u003e\n\n      \u003ctd\u003e3,000-10,000\u003c\/td\u003e\n\n      \u003ctd\u003eFast material removal, raw wood\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 125\/3\u003c\/td\u003e\n\n      \u003ctd\u003e3.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003e6,000-12,000\u003c\/td\u003e\n\n      \u003ctd\u003eWood, paint, finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 12E\u003c\/td\u003e\n\n      \u003ctd\u003e12 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushed\u003c\/td\u003e\n\n      \u003ctd\u003e1,000-3,000\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 625\u003c\/strong\u003e stands out for its small 2.5 mm orbit, ideal for fine finishing and delicate surfaces where every sanding mark counts.\u003c\/p\u003e\u003ch2\u003eDetailed technical specifications of the Mirka DEROS II 625\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e is a brushless electric orbital sander designed for intensive professional use. It features a 350 W \u003cstrong\u003ebrushless motor\u003c\/strong\u003e for constant power regardless of the load.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe sanding pad measures \u003cstrong\u003e125 mm in diameter\u003c\/strong\u003e, with a \u003cstrong\u003e5 mm orbital stroke\u003c\/strong\u003e (hence the \"5\" in \"625\"). This combination is suitable for \u003cstrong\u003efinishing sanding\u003c\/strong\u003e on bodywork, woodwork, and lacquered surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eSpeed is adjustable from \u003cstrong\u003e3,000 to 10,000 rpm\u003c\/strong\u003e via an electronic dial. A \u003cstrong\u003econstant speed control\u003c\/strong\u003e system maintains the RPM under load, preventing marks and burn marks on sensitive surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine weighs approximately \u003cstrong\u003e900 g\u003c\/strong\u003e. This is a key advantage: it can be held for long periods without fatigue, even when working overhead or in uncomfortable positions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIntegrated dust extraction is compatible with \u003cstrong\u003eMirka PROS\u003c\/strong\u003e systems and standard dust extractors via a 27 mm connection. Extraction rates reach over \u003cstrong\u003e99%\u003c\/strong\u003e with perforated Mirka abrasives.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad diameter\u003c\/th\u003e\n\n      \u003cth\u003eOrbital stroke\u003c\/th\u003e\n\n      \u003cth\u003eMotor power\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003ePrimary usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W (brushless)\u003c\/td\u003e\n\n      \u003ctd\u003e~900 g\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, bodywork, woodwork\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 650\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W (brushless)\u003c\/td\u003e\n\n      \u003ctd\u003e~900 g\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing-230V mains variant\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 325\u003c\/td\u003e\n\n      \u003ctd\u003e77 × 130 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W (brushless)\u003c\/td\u003e\n\n      \u003ctd\u003e~1,000 g\u003c\/td\u003e\n\n      \u003ctd\u003eTight areas, profiles\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 125\/3\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W (brushless)\u003c\/td\u003e\n\n      \u003ctd\u003e~1,100 g\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, cabinetry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 125-150 AVE\u003c\/td\u003e\n\n      \u003ctd\u003e125\/150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e4 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W (with brushes)\u003c\/td\u003e\n\n      \u003ctd\u003e~1,300 g\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral sanding, construction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eMirka DEROS II 625 vs. other orbital sanders: comparison table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003eComparison with the Mirka DEROS II 5650, the DEOS, and competitors Festool and Bosch\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e is clearly positioned within the range: \u003cstrong\u003e125 mm\u003c\/strong\u003e pad, \u003cstrong\u003e6.25 mm\u003c\/strong\u003e orbital stroke, 350 W brushless motor. A tool tailored for \u003cstrong\u003eintermediate and finishing sanding\u003c\/strong\u003e on bodywork, cabinetry, and painted surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eBy comparison, the \u003cstrong\u003eDEROS II 5650\u003c\/strong\u003e moves up to a 150 mm pad with a 5 mm stroke. It covers larger surfaces but is less aggressive. The 625 remains more maneuverable on complex workpieces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eBrand\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eOrbital stroke\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003ePrimary usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDEROS II 625\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eMirka\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e6.25 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003e0.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, bodywork, wood\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDEROS II 5650\u003c\/td\u003e\n\n      \u003ctd\u003eMirka\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003e1.0 kg\u003c\/td\u003e\n\n      \u003ctd\u003eLarge surfaces, wood\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDEOS 353CV\u003c\/td\u003e\n\n      \u003ctd\u003eMirka\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e200 W\u003c\/td\u003e\n\n      \u003ctd\u003e0.6 kg\u003c\/td\u003e\n\n      \u003ctd\u003eUltra-finishing, varnish\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eETS 125 REQ\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e250 W\u003c\/td\u003e\n\n      \u003ctd\u003e1.1 kg\u003c\/td\u003e\n\n      \u003ctd\u003eWood finishing, paint\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGEX 125-150 AVE\u003c\/td\u003e\n\n      \u003ctd\u003eBosch Pro\u003c\/td\u003e\n\n      \u003ctd\u003e125\/150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e4 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e1.5 kg\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral sanding, construction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eMirka's \u003cstrong\u003eDEOS 353CV\u003c\/strong\u003e targets ultra-finishing with a very short 3 mm stroke. It does not replace the DEROS II 625: the two are complementary depending on the work stage.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFestool ETS 125 REQ\u003c\/strong\u003e is precise but heavier and less aggressive. The \u003cstrong\u003eBosch GEX 125-150 AVE\u003c\/strong\u003e offers more raw power but adds significant weight, \u003cstrong\u003e+600 g\u003c\/strong\u003e compared to the DEROS II 625.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor intensive workshop or bodywork use, the \u003cstrong\u003elightweight design and 6.25 mm stroke\u003c\/strong\u003e of the DEROS II 625 make the difference during long sessions.\u003c\/p\u003e\u003ch2\u003ePerformance in the field: applications and sectors for the DEROS II 625\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e is a versatile sander, built for demanding professional environments. It adapts to a wide range of materials and finishes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn \u003cstrong\u003eautomotive bodywork\u003c\/strong\u003e, it excels at inter-coat sanding, surface preparation before painting, and finishing polishing. Its \u003cstrong\u003e2.5 mm orbit\u003c\/strong\u003e ensures a uniform result without marks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn \u003cstrong\u003ewoodworking\u003c\/strong\u003e, cabinet makers and joiners use it to smooth, refine, and prepare surfaces before varnishing or lacquering. It handles both softwoods and hardwoods with ease.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn \u003cstrong\u003eindustry and construction\u003c\/strong\u003e, it works on composites, plastics, panels, and metal surfaces. Its \u003cstrong\u003eBluetooth connection\u003c\/strong\u003e and digital interface allow parameters to be adjusted in real-time based on the surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the primary sectors where the DEROS II 625 makes a difference:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAutomotive bodywork and paint\u003c\/strong\u003e, preparation, inter-coat, finishing\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWoodworking and cabinetry\u003c\/strong\u003e, precision sanding on solid wood and panels\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eComposite and plastic industry\u003c\/strong\u003e, delicate sanding without gouging\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eConstruction sites\u003c\/strong\u003e, surface treatment before coating\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAerospace and marine\u003c\/strong\u003e, finishing on technical materials\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003elow vibration\u003c\/strong\u003e and integrated dust extraction system make it a tool well-suited for long work sessions, without excessive fatigue or residual dust.\u003c\/p\u003e\u003ch2\u003eCompatible accessories and dust extraction for dust-free sanding\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e is designed to operate within a complete ecosystem. Mirka accessories are directly compatible, requiring no adapters.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine accepts \u003cstrong\u003e125 mm Mirka Abranet abrasives\u003c\/strong\u003e, which are perforated across their entire surface. This mesh design eliminates areas without suction and ensures \u003cstrong\u003euniform dust extraction\u003c\/strong\u003e across the entire pad.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eExtraction connects via the \u003cstrong\u003eintegrated Ø 27 mm fitting\u003c\/strong\u003e, compatible with Mirka vacuum cleaners and most industrial vacuums on the market. At Dagobert Industrie, we also offer the Mirka MDE and MFDC vacuum cleaners, designed to work in tandem with the DEROS II.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to a conventional sander using solid discs, the \u003cstrong\u003eAbranet + direct extraction\u003c\/strong\u003e system drastically reduces abrasive clogging. The result: significantly longer abrasive life and a consistently clean work surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eMirka 125 mm replacement pads\u003c\/strong\u003e are available in soft or rigid versions depending on the nature of the surface being sanded, bodywork, carpentry, or composite.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003c!--nl----\u003e\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eAccessory\u003c\/th\u003e\n\n      \u003cth\u003eDEROS II 625 compatibility\u003c\/th\u003e\n\n      \u003cth\u003ePrimary usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka Abranet 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Native\u003c\/td\u003e\n\n      \u003ctd\u003eSanding wood, varnish, primer\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka Iridium 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Native\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork, painted surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka MDE Vacuum\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Ø 27 mm fitting\u003c\/td\u003e\n\n      \u003ctd\u003eFine dust extraction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e125 mm soft pad\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Native\u003c\/td\u003e\n\n      \u003ctd\u003eCurved surfaces, bodywork\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e125 mm rigid pad\u003c\/td\u003e\n\n      \u003ctd\u003e✔ Native\u003c\/td\u003e\n\n      \u003ctd\u003eFlat surfaces, carpentry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eFAQ - Mirka DEROS II 625\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. Which is the best Mirka sander?\u003c\/h3\u003e\n\u003cp\u003eThe answer depends on the application. For \u003cstrong\u003eversatile, precise, and comfortable\u003c\/strong\u003e sanding, the \u003cstrong\u003eMirka DEROS II 625\u003c\/strong\u003e is the benchmark of the range.\u003c\/p\u003e\n\n\u003cp\u003eIt combines a \u003cstrong\u003ebrushless motor\u003c\/strong\u003e, low vibration, and excellent dust extraction. For heavy-duty work or large surfaces, the DEROS II 5650 (150 mm pad) may be preferred.\u003c\/p\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the DEROS II 625 for the majority of professionals: auto body technicians, carpenters, and painters.\u003c\/p\u003e\u003cbr\u003e\n\n\u003ch3\u003e2. What is the power of the Mirka DEROS II 625 sander?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 625\u003c\/strong\u003e is equipped with a \u003cstrong\u003e350 W brushless motor\u003c\/strong\u003e. This is sufficient for aggressive sanding on wood, metal, paint, or primer.\u003c\/p\u003e\n\n\u003cp\u003eThe brushless motor ensures \u003cstrong\u003econstant torque\u003c\/strong\u003e, even under load. The speed is adjustable from \u003cstrong\u003e3,000 to 10,000 rpm\u003c\/strong\u003e to adapt to any material.\u003c\/p\u003e\n\n\u003cp\u003eThe result: a machine that doesn't stall, doesn't overheat, and is built to last.\u003c\/p\u003e\u003cbr\u003e\n\n\u003ch3\u003e3. What is the difference between the DEROS II 625 and the DEROS II 5650?\u003c\/h3\u003e\n\u003cp\u003eThe main difference is the \u003cstrong\u003esize of the pad\u003c\/strong\u003e: 125 mm for the 625, 150 mm for the 5650.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 625\u003c\/strong\u003e is more maneuverable, making it ideal for tight areas, complex shapes, and finishing work. The \u003cstrong\u003e5650\u003c\/strong\u003e covers more surface area in fewer passes, suitable for large flat surfaces.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e2.5 mm orbit\u003c\/strong\u003e is identical on both models. The choice is therefore based on the surface to be treated, not on power.\u003c\/p\u003e\u003cbr\u003e\n\n\u003ch3\u003e4. What is the most efficient orbital sander for bodywork and carpentry?\u003c\/h3\u003e\n\u003cp\u003eFor \u003cstrong\u003ebodywork\u003c\/strong\u003e, the DEROS II 625 is a solid choice: low vibration, uniform finish, compatible with Mirka \u003cstrong\u003eAbranet and Galaxy\u003c\/strong\u003e abrasives.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003ecarpentry\u003c\/strong\u003e, it excels on raw wood, painted wood, and laminate. The 125 mm pad allows you to work near edges and into corners.\u003c\/p\u003e\n\n\u003cp\u003eCompared to competitors like the \u003cstrong\u003eFestool ETS EC 125\u003c\/strong\u003e or the \u003cstrong\u003eBosch GEX 125-150 AVE\u003c\/strong\u003e, the DEROS II 625 stands out for its \u003cstrong\u003eintegrated dust extraction system\u003c\/strong\u003e and its lightweight feel during prolonged use.\u003c\/p\u003e","brand":"Mirka","offers":[{"title":"150 \/ Eccentricity 2.5","offer_id":58488313250175,"sku":"MIRKA_MID6254044","price":614.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-mirkaR-deros-ii-625.jpg?v=1789990347"},{"product_id":"ponceuse-orbitale-mirkar-deros-ii-650","title":"Mirka® DEROS II 650 orbital sander","description":"\u003ch2\u003eMirka DEROS II 650 Orbital Sander, Complete Overview\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 650\u003c\/strong\u003e is an \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e tailored for professionals who refuse to compromise on finish quality.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWith a brushless motor, reduced vibrations, and ergonomic grip, it handles long days without fatiguing the operator.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eCompatible with \u003cstrong\u003eMirka's integrated dust extraction\u003c\/strong\u003e, it keeps the backing pad clean and the surface clear throughout the work.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eA \u003cstrong\u003emade in Finland\u003c\/strong\u003e tool that is reliable, precise, and designed to last in body shops, carpentry workshops, and industrial finishing facilities.\u003c\/p\u003e\u003ch2\u003eWhat is the Mirka DEROS II 650 orbital sander?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 650\u003c\/strong\u003e is an electric random orbital sander designed for professionals in automotive refinishing, woodworking, and surface treatment. It succeeds the first-generation DEROS, bringing significant improvements to speed control and ergonomics.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e150 mm\u003c\/strong\u003e backing pad with a \u003cstrong\u003e5 mm\u003c\/strong\u003e orbital stroke makes it a versatile tool: sanding primer, heavy-duty sanding, and intermediate finishing. It works equally well on metal, wood, and composites.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eBrushless motor technology: what it actually changes\u003c\/h3\u003e\n\n\u003cp\u003eA \u003cstrong\u003ebrushless motor\u003c\/strong\u003e eliminates the mechanical wear parts found in a traditional brushed motor. The result: less maintenance, a longer service life, and significantly lower heat generation.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn practical terms, the motor adjusts its power to the load in real time. On an irregular surface, the speed remains stable without manual intervention. This is what Mirka calls \u003cstrong\u003econstant speed electronic control\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eDirect comparison with competing technologies:\u003c\/p\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003eDEROS II 650 (brushless)\u003c\/th\u003e\n\n      \u003cth\u003eClassic brushed sander\u003c\/th\u003e\n\n      \u003cth\u003eFestool ETS 150\/5 EQ (brushless)\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMotor wear\u003c\/td\u003e\n\n      \u003ctd\u003eVery low\u003c\/td\u003e\n\n      \u003ctd\u003eHigh (carbon brushes to replace)\u003c\/td\u003e\n\n      \u003ctd\u003eVery low\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eConstant speed under load\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eYes\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eWeight\u003c\/td\u003e\n\n      \u003ctd\u003e~1.0 kg\u003c\/td\u003e\n\n      \u003ctd\u003e~1.3-1.6 kg\u003c\/td\u003e\n\n      \u003ctd\u003e~1.2 kg\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eOrbital stroke\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eVariable\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eConnectivity\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eBluetooth (Mirka app)\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eNone\u003c\/td\u003e\n\n      \u003ctd\u003eNone\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe integrated \u003cstrong\u003eBluetooth connectivity\u003c\/strong\u003e is a real differentiator: via the Mirka app, you can track usage history and adjust tool settings directly from a smartphone.\u003c\/p\u003e\u003ch2\u003eTechnical specifications and power of the Mirka DEROS II 650\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 650\u003c\/strong\u003e is a brushless electric orbital sander designed for demanding professionals. Its \u003cstrong\u003e350 W\u003c\/strong\u003e brushless motor delivers constant power, even under load.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt operates at a variable speed between \u003cstrong\u003e3,000 and 10,000 rpm\u003c\/strong\u003e, adjustable via the integrated dial. The \u003cstrong\u003e150 mm\u003c\/strong\u003e backing pad with a \u003cstrong\u003e5 mm\u003c\/strong\u003e orbital grain ensures fast and uniform sanding.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine weighs only \u003cstrong\u003e1.1 kg\u003c\/strong\u003e. This is a real advantage for long-duration work: less fatigue, better control.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe integrated \u003cstrong\u003eBluetooth connection\u003c\/strong\u003e allows you to control the speed from the Mirka app. Ideal for workshops looking to standardize their sanding processes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere is a summary of the key features:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eMotor: \u003cstrong\u003ebrushless 350 W\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003ePad: \u003cstrong\u003e150 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eOrbit: \u003cstrong\u003e5 mm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eSpeed: \u003cstrong\u003e3,000-10,000 rpm\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eWeight: \u003cstrong\u003e1.1 kg\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eDust extraction: \u003cstrong\u003eø 27 mm\u003c\/strong\u003e connection\n\n\u003c\/li\u003e\n\n  \u003cli\u003eConnectivity: \u003cstrong\u003eBluetooth\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 650\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003e1.1 kg\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing and intermediate sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS 650CV\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003e1.2 kg\u003c\/td\u003e\n\n      \u003ctd\u003eBody shop finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e1.3 kg\u003c\/td\u003e\n\n      \u003ctd\u003eWood and varnish finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15ES\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e310 W\u003c\/td\u003e\n\n      \u003ctd\u003e1.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003eMatting and paint correction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eComparison: Mirka DEROS II 650 against other orbital sanders on the market\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 650\u003c\/strong\u003e positions itself in the high-end electronic orbital sander category. Compared to its direct competitors, it mainly stands out for its \u003cstrong\u003ebrushless motor\u003c\/strong\u003e and integrated dust extraction system.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere is a quick comparison with the most common models on the market:\u003c\/p\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eManufacturer\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003eIntegrated extraction\u003c\/th\u003e\n\n      \u003cth\u003eStrength\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDEROS II 650\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eMirka\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eYes (direct)\u003c\/td\u003e\n\n      \u003ctd\u003eOptimal extraction, low vibration\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDEROS 650CV\u003c\/td\u003e\n\n      \u003ctd\u003eMirka\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e350 W\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003ePrevious generation, same range\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eETS 150\/5 EQ\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e310 W\u003c\/td\u003e\n\n      \u003ctd\u003eBrushed\u003c\/td\u003e\n\n      \u003ctd\u003eYes (via Systainer)\u003c\/td\u003e\n\n      \u003ctd\u003eFestool ecosystem, robustness\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePEX 400 AE\u003c\/td\u003e\n\n      \u003ctd\u003eMetabo\u003c\/td\u003e\n\n      \u003ctd\u003e4 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003eBrushed\u003c\/td\u003e\n\n      \u003ctd\u003eNo (dust outlet)\u003c\/td\u003e\n\n      \u003ctd\u003eRaw power, affordable price\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGEX 125-150 AVE\u003c\/td\u003e\n\n      \u003ctd\u003eBosch Pro\u003c\/td\u003e\n\n      \u003ctd\u003e4 \/ 6 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003eBrushed\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eDual orbit, versatility\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ebrushless motor\u003c\/strong\u003e of the DEROS II 650 gives it a significantly longer lifespan than the Metabo or Bosch models in this range. Less mechanical wear, less maintenance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eDirect pad-level dust extraction\u003c\/strong\u003e is the other key advantage. Unlike the Festool ETS 150, which relies on a dedicated external vacuum, the DEROS II 650 manages dust efficiently with any standard vacuum cleaner.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the previous generation (DEROS 650CV), the DEROS II 650 brings \u003cstrong\u003erevised ergonomics\u003c\/strong\u003e, improved soft-start, and better heat dissipation. A relevant upgrade for intensive workshop or jobsite use.\u003c\/p\u003e\u003ch2\u003eApplications and sectors of use for the DEROS II 650\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 650\u003c\/strong\u003e is a random orbital sander designed for professionals who work fast and well. It adapts to a wide range of materials and contexts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn \u003cstrong\u003eautomotive bodywork\u003c\/strong\u003e, it excels at paint sanding, surface preparation before priming, and polishing finishes. Its \u003cstrong\u003e5 mm\u003c\/strong\u003e orbit offers a good balance between material removal and surface quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn the \u003cstrong\u003ewood industry\u003c\/strong\u003e, it treats panels, furniture, and parquet flooring efficiently. It is used on solid wood as well as MDF or plywood.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003econstruction and renovation\u003c\/strong\u003e sectors use it to prepare walls, ceilings, and floors before painting or coating. Coupled with a dust extraction system, it significantly limits dust on job sites.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt also finds its place in \u003cstrong\u003ecomposite manufacturing\u003c\/strong\u003e, particularly in aeronautics and marine sectors, where sanding consistency is critical.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the main application areas:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eBody shop\u003c\/strong\u003e: paint prep, primer sanding, finishing\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eCarpentry\/Cabinetmaking\u003c\/strong\u003e: solid wood, MDF, plywood\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eConstruction\u003c\/strong\u003e: fillers, plaster, paint, floors\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eComposites\u003c\/strong\u003e: fiberglass, carbon fiber, resins\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eGeneral industry\u003c\/strong\u003e: preparation of light metal surfaces\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eAccessories compatible with the Mirka DEROS II 650\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 650\u003c\/strong\u003e relies on a well-stocked ecosystem of accessories. Mirka designed this machine to work with a coherent range of consumables and complementary equipment.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe sanding pad is a central element. The DEROS II 650 uses a \u003cstrong\u003e150 mm Ø pad\u003c\/strong\u003e, available in soft or hard versions depending on the flatness of the surface to be treated.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor abrasives, the \u003cstrong\u003eMirka Abranet\u003c\/strong\u003e range is the benchmark. This net disc allows optimal extraction over the entire surface, significantly reducing clogging and extending abrasive life.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eMirka Gold\u003c\/strong\u003e and \u003cstrong\u003eMirka Iridium\u003c\/strong\u003e abrasives are also compatible. Gold is suitable for versatile applications in bodywork and carpentry, while Iridium is tailored for hard surfaces and high-performance varnishes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegarding extraction, the DEROS II 650 connects directly to \u003cstrong\u003eMirka DE or DECO extractors\u003c\/strong\u003e via the quick-coupling system. A universal adapter also allows it to be connected to third-party vacuums with a standard 27 mm connector.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere is a summary of essential accessories:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAbranet discs Ø 150 mm\u003c\/strong\u003e, universal sanding, excellent extraction\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eGold discs Ø 150 mm\u003c\/strong\u003e, bodywork, wood, versatility\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eIridium discs Ø 150 mm\u003c\/strong\u003e, hard varnishes, demanding surfaces\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSoft pad Ø 150 mm\u003c\/strong\u003e, curved or irregular surfaces\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eHard pad Ø 150 mm\u003c\/strong\u003e, flat surfaces, precise sanding\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMirka DE 1230 L AFC Extractor\u003c\/strong\u003e, filtered extraction, direct connection\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer these Mirka accessories to help you get the best out of your DEROS II 650 from the first use.\u003c\/p\u003e\u003ch2\u003eFAQ - Mirka DEROS II 650\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between the DEROS II 650 and the DEROS II 550?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 650\u003c\/strong\u003e runs with a 6 mm orbit compared to 5 mm for the 550. The result: it removes more material per pass. It is better suited for \u003cstrong\u003eroughing and shaping\u003c\/strong\u003e tasks, whereas the 550 is more geared towards finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. Can it be used without a vacuum?\u003c\/h3\u003e\n\u003cp\u003eTechnically yes, but it is not recommended. The \u003cstrong\u003eDEROS II 650 is designed to operate as an extraction system\u003c\/strong\u003e via the Mirka connection or a standard vacuum. Without extraction, dust quickly clogs the abrasive and reduces performance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Which abrasives should be used with the DEROS II 650?\u003c\/h3\u003e\n\u003cp\u003eThe machine is optimized for \u003cstrong\u003e150 mm Mirka abrasives\u003c\/strong\u003e, particularly the \u003cstrong\u003eAbranet\u003c\/strong\u003e (net, ideal for extraction) and \u003cstrong\u003eGalaxy\u003c\/strong\u003e (long life) ranges. It also accepts other 150 mm, 17-hole, or standard Velcro-backed discs.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Is it suitable for automotive bodywork?\u003c\/h3\u003e\n\u003cp\u003eYes, it is one of its favorite terrains. The \u003cstrong\u003eDEROS II 650 is widely used in body prep\u003c\/strong\u003e: sanding filler, color matching, and preparation before primer. Its random orbital movement avoids sanding marks on painted surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What is the service life of the machine?\u003c\/h3\u003e\n\u003cp\u003eMirka designs the DEROS range for \u003cstrong\u003eintensive professional use\u003c\/strong\u003e. With regular maintenance (cleaning filters, checking the pad), the DEROS II 650 is intended to last for several years in a workshop. Mirka also offers an after-sales service network with available spare parts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Is the DEROS II 650 compatible with older DEROS accessories?\u003c\/h3\u003e\n\u003cp\u003eIn most cases, \u003cstrong\u003efirst-generation DEROS pads and abrasives remain compatible\u003c\/strong\u003e. However, some specific DEROS II accessories (such as new handles or covers) are not backwards compatible. Check the part number before ordering.\u003c\/p\u003e","brand":"Mirka","offers":[{"title":"150 \/ Eccentricity 5.0","offer_id":58488313774463,"sku":"MIRKA_MID6504044","price":614.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-mirkaR-deros-ii-650.jpg?v=1789990348"},{"product_id":"ponceuse-orbitale-mirkar-deros-ii-680","title":"Mirka® DEROS II 680 orbital sander","description":"\u003ch2\u003eMirka DEROS II 680 Orbital Sander-8.0 mm Orbit, Ø 150 mm\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e is an \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e built for professionals who refuse to compromise on finish quality.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eWith an \u003cstrong\u003e8.0 mm orbit\u003c\/strong\u003e and a \u003cstrong\u003eØ 150 mm\u003c\/strong\u003e pad, it covers ground quickly and sands finely, making it ideal for automotive, wood, or composite surfaces.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eIts brushless motor and \u003cstrong\u003eintegrated dust extraction system\u003c\/strong\u003e make it a clean, powerful, and durable tool for daily use.\u003c\/p\u003e\u003ch2\u003eIntroducing the Mirka DEROS II 680: A High-Performance Orbital Sander\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e is an electric orbital sander designed for demanding professionals. With an \u003cstrong\u003e8.0 mm orbit\u003c\/strong\u003e and a \u003cstrong\u003eØ 150 mm\u003c\/strong\u003e pad, it offers fast material removal while maintaining a clean finish.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is the go-to tool for automotive, cabinet making, and any application requiring \u003cstrong\u003eaggressive sanding for finishing\u003c\/strong\u003e. It adapts just as well to large flat surfaces as it does to preparation work before painting.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eBrushless motor and integrated central vacuum technology\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe DEROS II 680's \u003cstrong\u003ebrushless motor\u003c\/strong\u003e delivers constant power regardless of the pressure applied. With no brushes to replace, maintenance is reduced and the tool's lifespan is significantly extended.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eintegrated central vacuum\u003c\/strong\u003e extracts dust directly at the source, at the center of the pad. The result: a healthier work environment and abrasives that last longer.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eKey highlights of this machine:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable speed\u003c\/strong\u003e to adapt to every material\u003c\/li\u003e\n\n  \u003cli\u003eCompact weight to reduce fatigue during long sessions\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eMirka ABRANET compatibility\u003c\/strong\u003e and the entire range of Ø 150 mm abrasives\u003c\/li\u003e\n\n  \u003cli\u003eErgonomic housing with anti-slip grip\u003c\/li\u003e\n\n  \u003cli\u003eDirect connection to a vacuum cleaner via the extraction port\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003ePrimary Use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e8.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eMaterial removal + finish\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 650\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, delicate surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushless\u003c\/td\u003e\n\n      \u003ctd\u003eHigh-precision finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 150 AC\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBrushed\u003c\/td\u003e\n\n      \u003ctd\u003eLight finishing, occasional use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eDetailed technical specifications of the DEROS II 680\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e is an electric random orbital sander designed for demanding professionals. It features a \u003cstrong\u003e680 W\u003c\/strong\u003e brushless motor for constant power, regardless of the workload.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eØ 150 mm pad\u003c\/strong\u003e and \u003cstrong\u003e8.0 mm orbit\u003c\/strong\u003e offer an excellent compromise between material removal speed and finish quality. Ideal for sanding medium to large surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eSpeed is adjustable from \u003cstrong\u003e4,000 to 10,000 rpm\u003c\/strong\u003e via an electronic dial. Maintained speed under load ensures a consistent cut, even on difficult passes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka\u003c\/strong\u003e integrated extraction system interfaces directly with compatible extractors. The perforated backing pad ensures \u003cstrong\u003eoptimal dust collection\u003c\/strong\u003e right at the source.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e brushless, 680 W\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003ePad diameter:\u003c\/strong\u003e 150 mm\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eOrbit:\u003c\/strong\u003e 8.0 mm\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eSpeed range:\u003c\/strong\u003e 4,000-10,000 rpm\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive attachment:\u003c\/strong\u003e Velcro (hook-and-loop)\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 1.3 kg\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 230 V \/ 50 Hz\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eMotor\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eDiameter\u003c\/th\u003e\n\n      \u003cth\u003ePrimary Use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e680 W (brushless)\u003c\/td\u003e\n\n      \u003ctd\u003e8.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive sanding, large surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 550\u003c\/td\u003e\n\n      \u003ctd\u003e550 W (brushless)\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, automotive\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003e400 W (brushless)\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, wood and lacquer\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBosch GEX 150 AC\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e6.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral use, versatile\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith \u003cstrong\u003e680 W and an 8 mm orbit\u003c\/strong\u003e, the DEROS II 680 is clearly positioned in the high-performance category. It outperforms entry-level sanders in material removal while maintaining a \u003cstrong\u003epolished finish\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eComparison: Mirka DEROS II 680 versus other models in the DEROS II range\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDEROS II 650 vs DEROS II 680: which orbit difference to choose?\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II\u003c\/strong\u003e range offers two main orbits: \u003cstrong\u003e5.0 mm\u003c\/strong\u003e (model 650) and \u003cstrong\u003e8.0 mm\u003c\/strong\u003e (model 680). This single figure radically changes the usage.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 650\u003c\/strong\u003e is tailored for \u003cstrong\u003efine finishing\u003c\/strong\u003e: sanding between varnish coats, automotive polishing, fragile surfaces. Its tight movement generates little heat and leaves a nearly flawless surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 680\u003c\/strong\u003e, with its \u003cstrong\u003e8.0 mm orbit\u003c\/strong\u003e, removes much more material per pass. It is made for \u003cstrong\u003estock removal, leveling, and sanding large surfaces\u003c\/strong\u003e: solid wood, MDF, car bodywork before primer.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePad Ø\u003c\/th\u003e\n\n      \u003cth\u003ePrimary Use\u003c\/th\u003e\n\n      \u003cth\u003eRecommended Grit\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 650\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, inter-coat, automotive\u003c\/td\u003e\n\n      \u003ctd\u003eP180, P400\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e8.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eStock removal, leveling, large surfaces\u003c\/td\u003e\n\n      \u003ctd\u003eP80, P180\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood and lacquer finishing\u003c\/td\u003e\n\n      \u003ctd\u003eP150, P400\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/3\u003c\/td\u003e\n\n      \u003ctd\u003e3.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eUltra-fine finishing, varnish\u003c\/td\u003e\n\n      \u003ctd\u003eP240, P600\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe rule is simple: \u003cstrong\u003ethe larger the orbit, the faster the material removal\u003c\/strong\u003e, but the final surface is less smooth. The 680 saves time on large surfaces; you then finish with the 650 if the final finish requires it.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor a workshop that only wants one machine, the \u003cstrong\u003eDEROS II 680 is the most versatile choice\u003c\/strong\u003e: it covers 80% of common work for the carpenter, auto body repairer, or furniture maker.\u003c\/p\u003e\u003ch2\u003eApplications and materials: wood, metal, plaster, and automotive\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e is a sander designed to work on a wide range of surfaces. Its \u003cstrong\u003e8.0 mm orbit\u003c\/strong\u003e and Ø 150 mm pad make it efficient in very different contexts.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eOn \u003cstrong\u003ewood\u003c\/strong\u003e, it excels in furniture making, carpentry, and interior outfitting. It ensures a homogeneous finish without swirl marks, even on sensitive wood species.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eOn \u003cstrong\u003emetal\u003c\/strong\u003e, it prepares surfaces before treatment, stripping, or painting. The absence of excessive vibrations limits fatigue during long sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn \u003cstrong\u003eautomotive\u003c\/strong\u003e applications, it integrates naturally into inter-coat sanding and lacquer finishing processes. The 8.0 mm orbit removes material faster than a 5.0 mm, without sacrificing the final result.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eOn \u003cstrong\u003eplaster and fillers\u003c\/strong\u003e, it quickly flattens joints and irregularities. Coupled with a vacuum system, it keeps the job site clean.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere is an overview of uses according to the surface:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eSolid wood \/ panels\u003c\/strong\u003e: stock removal, finishing, inter-coat varnish sanding\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eMetal \/ steel\u003c\/strong\u003e: surface preparation, removal of light corrosion\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAutomotive\u003c\/strong\u003e: primer sanding, lacquer finishing, scratch removal\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003ePlaster \/ filler\u003c\/strong\u003e: joint smoothing, repair sanding\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eComposites \/ plastics\u003c\/strong\u003e: light finishing, bonding preparation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePrimary Use\u003c\/th\u003e\n\n      \u003cth\u003eMaterial Removal\u003c\/th\u003e\n\n      \u003cth\u003eFinish\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e8.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003eAutomotive, wood, metal\u003c\/td\u003e\n\n      \u003ctd\u003e★★★★☆\u003c\/td\u003e\n\n      \u003ctd\u003e★★★★☆\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 550\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, varnish\u003c\/td\u003e\n\n      \u003ctd\u003e★★★☆☆\u003c\/td\u003e\n\n      \u003ctd\u003e★★★★★\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood \/ lacquer finishing\u003c\/td\u003e\n\n      \u003ctd\u003e★★★☆☆\u003c\/td\u003e\n\n      \u003ctd\u003e★★★★★\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETSC 125\/3\u003c\/td\u003e\n\n      \u003ctd\u003e3.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003eUltra-fine finishing\u003c\/td\u003e\n\n      \u003ctd\u003e★★☆☆☆\u003c\/td\u003e\n\n      \u003ctd\u003e★★★★★\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eCompatible accessories and recommended consumables for the DEROS II 680\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 680\u003c\/strong\u003e accepts \u003cstrong\u003eØ 150 mm\u003c\/strong\u003e abrasive discs with Velcro interface. To fully exploit the machine, you must choose the right consumables.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eMirka offers its \u003cstrong\u003eAbranet\u003c\/strong\u003e range: an abrasive with a net structure that extracts dust directly through the disc. Result: less clogging, a cleaner surface, and an extended service life.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor finishing on varnish or paint, the \u003cstrong\u003eMirka Basecut\u003c\/strong\u003e and \u003cstrong\u003eMirka Galaxy\u003c\/strong\u003e discs are particularly suitable. They handle heat well and keep their bite longer than conventional abrasives.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the consumables and accessories to plan for with the DEROS II 680:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAbranet discs Ø 150 mm\u003c\/strong\u003e, grits 80 to 400, for wood and automotive use\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eGalaxy discs Ø 150 mm\u003c\/strong\u003e, grits 80 to 1000, for paint and varnish finishing\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eBasecut discs Ø 150 mm\u003c\/strong\u003e, grits 40 to 320, for rapid stock removal\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eReplacement backing pad Ø 150 mm\u003c\/strong\u003e, replace as soon as the Velcro wears out\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eCollection bag or dust extractor\u003c\/strong\u003e, compatible with Ø 27 mm connection\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eAbrasive\u003c\/th\u003e\n\n      \u003cth\u003eAvailable Grits\u003c\/th\u003e\n\n      \u003cth\u003eRecommended Materials\u003c\/th\u003e\n\n      \u003cth\u003eKey Highlight\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka Abranet\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e80-400\u003c\/td\u003e\n\n      \u003ctd\u003eWood, MDF, automotive\u003c\/td\u003e\n\n      \u003ctd\u003eThrough-extraction, anti-clogging\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka Galaxy\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e80-1000\u003c\/td\u003e\n\n      \u003ctd\u003eVarnish, paint, plastic\u003c\/td\u003e\n\n      \u003ctd\u003eUltra-smooth finish, long life\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka Basecut\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e40-320\u003c\/td\u003e\n\n      \u003ctd\u003eRaw wood, composites\u003c\/td\u003e\n\n      \u003ctd\u003eAggressive and fast stock removal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka Goldflex\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e80-400\u003c\/td\u003e\n\n      \u003ctd\u003eMetal, lacquered wood\u003c\/td\u003e\n\n      \u003ctd\u003eFlexibility, ideal for curved shapes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we carry all these Mirka consumables to ensure you work with discs perfectly adapted to your machine.\u003c\/p\u003e\u003ch2\u003eFAQ - Mirka DEROS II 680 Orbital Sander\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between the DEROS II 680 and the DEROS II 650?\u003c\/h3\u003e\n\n\u003cp\u003eThe main difference lies in the \u003cstrong\u003eorbit\u003c\/strong\u003e: 8.0 mm for the 680, versus 5.0 mm for the 650.\u003c\/p\u003e\n\n\u003cp\u003eA larger orbit means a \u003cstrong\u003ehigher rate of material removal\u003c\/strong\u003e. The 680 is therefore tailored for stock removal, large surfaces, and aggressive sanding.\u003c\/p\u003e\n\n\u003cp\u003eThe 650 is better suited for \u003cstrong\u003efine finishing\u003c\/strong\u003e and automotive work where precision is paramount.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. Is the DEROS II 680 suitable for automotive professionals?\u003c\/h3\u003e\n\n\u003cp\u003eYes, but with a nuance. Its \u003cstrong\u003e8.0 mm orbit\u003c\/strong\u003e makes it particularly efficient for sanding large bodywork areas quickly.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003efinishing or polishing\u003c\/strong\u003e stages, you would prefer the DEROS II 650 or a sander with an even finer orbit.\u003c\/p\u003e\n\n\u003cp\u003eThe 680 remains a \u003cstrong\u003ebenchmark tool\u003c\/strong\u003e in automotive repair for sanding primers and fillers.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Which abrasive should I use with the Mirka DEROS II 680?\u003c\/h3\u003e\n\n\u003cp\u003eMirka recommends its \u003cstrong\u003eAbranet\u003c\/strong\u003e or \u003cstrong\u003eGalaxy\u003c\/strong\u003e discs in Ø 150 mm, compatible with the machine's Velcro attachment.\u003c\/p\u003e\n\n\u003cp\u003eFor general sanding, start with \u003cstrong\u003egrit P80 to P150\u003c\/strong\u003e. To refine before painting, go up to P240 or P320.\u003c\/p\u003e\n\n\u003cp\u003eAbranet is particularly appreciated for its \u003cstrong\u003eoptimal dust extraction\u003c\/strong\u003e thanks to its net structure.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Does the DEROS II 680 require a compressor?\u003c\/h3\u003e\n\n\u003cp\u003eNo. It is an \u003cstrong\u003eelectric tool\u003c\/strong\u003e, powered directly from the mains. No need for a compressor or compressed air network.\u003c\/p\u003e\n\n\u003cp\u003eThis is one of its great advantages over pneumatic sanders: it can be used \u003cstrong\u003eanywhere, without specific infrastructure\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What suction system should I connect to the DEROS II 680?\u003c\/h3\u003e\n\n\u003cp\u003eMirka recommends coupling it to a compatible vacuum, ideally the \u003cstrong\u003eMirka DE or DECO range\u003c\/strong\u003e, for optimal extraction.\u003c\/p\u003e\n\n\u003cp\u003eThe machine has an \u003cstrong\u003eintegrated suction connection\u003c\/strong\u003e. Proper extraction extends the lifespan of the abrasives and improves surface quality.\u003c\/p\u003e\n\n\u003cp\u003eAny vacuum with an adapted connection and \u003cstrong\u003esufficient airflow\u003c\/strong\u003e will do the job, but Mirka models are designed to operate as a closed system with the DEROS II.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Why choose the Mirka DEROS II over a classic orbital sander?\u003c\/h3\u003e\n\n\u003cp\u003eThe DEROS II features a \u003cstrong\u003ebrushless motor\u003c\/strong\u003e: quieter, more durable, and with better speed regulation under load.\u003c\/p\u003e\n\n\u003cp\u003eIts \u003cstrong\u003ereduced weight\u003c\/strong\u003e and ergonomics, designed for intensive use, limit fatigue during long work sessions.\u003c\/p\u003e\n\n\u003cp\u003eCompared to a classic brushed sander, it offers a \u003cstrong\u003esignificantly longer lifespan\u003c\/strong\u003e and less vibration.\u003c\/p\u003e","brand":"Mirka","offers":[{"title":"150 \/ Eccentricity 8.0","offer_id":58488314265983,"sku":"MIRKA_MID6804044","price":614.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-mirkaR-deros-ii-680.jpg?v=1789990350"},{"product_id":"ponceuse-orbitale-mirkar-deros-ii-750","title":"Mirka® DEROS II 750 orbital sander","description":"\u003ch2\u003eMirka DEROS II 750 Orbital Sander, Full Overview\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e is an \u003cstrong\u003eelectric orbital sander\u003c\/strong\u003e tailored for professionals who do not compromise on finishing quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eBrushless motor, reduced vibrations, ergonomic grip: it handles long sessions without fatiguing the operator.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith its \u003cstrong\u003e150 mm pad\u003c\/strong\u003e and \u003cstrong\u003evariable speed\u003c\/strong\u003e, it adapts equally well to \u003cstrong\u003eautomotive body sanding\u003c\/strong\u003e and wood or composite surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is the benchmark tool for workshops that want a \u003cstrong\u003econsistent, fast, and repeatable result\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is the Mirka DEROS II 750 orbital sander?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e is a high-end electric orbital sander designed for finishing and sanding on flat or slightly curved surfaces. It is aimed at body shop technicians as well as woodworkers, painters, and industrial finishing professionals.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe number \u003cstrong\u003e750\u003c\/strong\u003e refers to its pad diameter: \u003cstrong\u003e150 mm\u003c\/strong\u003e, with a 5 mm orbit. It is the most versatile configuration in the DEROS II range, balancing stock removal power and finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eMirka positions this machine as a direct evolution of the first-generation DEROS, with a revised motor, improved ergonomics, and better thermal management.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eBrushless technology and brushless design: what it really changes\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eA \u003cstrong\u003ebrushless\u003c\/strong\u003e motor has no mechanical contacts that wear out. Result: less maintenance, no carbon brush replacements, and a significantly longer lifespan than a conventional brushed motor.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn terms of performance, the brushless motor maintains a \u003cstrong\u003econstant speed under load\u003c\/strong\u003e. When you press down on the workpiece, the speed does not drop. The sanding remains consistent from the beginning to the end of the pass.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe heat generated is also significantly reduced. For long sessions, this is a concrete advantage: \u003cstrong\u003eless thermal fatigue\u003c\/strong\u003e for the machine and the operator.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to a brushed motor sander like the Festool ETS 150\/3, the gain is felt primarily in consistency during intensive use and long-term maintenance costs.\u003c\/p\u003e\u003ch2\u003eDetailed technical specifications of the Mirka DEROS II 750\u003c\/h2\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e150 mm Ø pad and 5.0 mm orbit: versatility for the sake of the result\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e features a \u003cstrong\u003e150 mm diameter pad\u003c\/strong\u003e coupled with a \u003cstrong\u003e5.0 mm orbit\u003c\/strong\u003e. This intermediate size covers a wide range of applications, from body sanding to large wooden surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe 5.0 mm orbit offers a \u003cstrong\u003ebalance between aggressiveness and smoothness\u003c\/strong\u003e. It removes material more efficiently than a 3.0 mm, while leaving a cleaner surface than an 8.0 mm. Ideal for preparing a surface before applying paint or varnish.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ebrushless motor\u003c\/strong\u003e develops a power of \u003cstrong\u003e750 W\u003c\/strong\u003e. It ensures constant torque regardless of the pressure applied, with no loss of speed under load.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe speed is \u003cstrong\u003eadjustable from 3,000 to 10,000 rpm\u003c\/strong\u003e via an electronic dial. The machine can be easily adapted to the material being worked on: wood, metal, composite, plastic.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eMain Usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e750 W\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile, bodywork, wood, composite\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 650\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e650 W\u003c\/td\u003e\n\n      \u003ctd\u003eMedium surfaces, bodywork finish\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003eØ 150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003eWood and paint finishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 21 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003eØ 180 mm\u003c\/td\u003e\n\n      \u003ctd\u003e21.0 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003eLarge surface bodywork polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine's weight is contained at \u003cstrong\u003eapproximately 1.8 kg\u003c\/strong\u003e. During a workday, this lightness reduces fatigue and improves the precision of the movement.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eintegrated Bluetooth connection\u003c\/strong\u003e allows speed control and monitoring of parameters via the Mirka app. A practical feature for professionals working in series.\u003c\/p\u003e\u003ch2\u003ePerformance and applications: which sectors does the DEROS II 750 excel in?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e is an electric orbital sander designed for professionals who do not want to compromise on finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003e750 W\u003c\/strong\u003e brushless motor delivers constant power, even under load. Result: a stable orbital speed from the start to the end of sanding.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt excels in \u003cstrong\u003eautomotive bodywork\u003c\/strong\u003e: paint correction, scratch removal, preparation before varnishing. The random orbital movement prevents swirl marks on lacquered surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn \u003cstrong\u003ewoodworking and cabinetmaking\u003c\/strong\u003e, it is also a leader. Panel sanding, preparation before stain or paint, furniture finishing, the DEROS II 750 handles both with a \u003cstrong\u003e150 mm pad\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003emarine and aeronautical\u003c\/strong\u003e sectors adopt it for the same reasons: precision, consistency, and compatibility with Mirka Abranet or Galaxy abrasives.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eMain Usage\u003c\/th\u003e\n\n      \u003cth\u003eCorded \/ Cordless\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e750 W\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003ePro finishing all surfaces\u003c\/td\u003e\n\n      \u003ctd\u003eCorded\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS 650CV\u003c\/td\u003e\n\n      \u003ctd\u003e650 W\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork, wood\u003c\/td\u003e\n\n      \u003ctd\u003eCorded\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka AIROS\u003c\/td\u003e\n\n      \u003ctd\u003e-\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eLight finishing, compressed air\u003c\/td\u003e\n\n      \u003ctd\u003ePneumatic\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood, fine finishing\u003c\/td\u003e\n\n      \u003ctd\u003eCorded\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer the DEROS II 750 to wood, bodywork, and industrial professionals who are looking for a \u003cstrong\u003ereliable, powerful, and durable\u003c\/strong\u003e machine.\u003c\/p\u003e\u003ch2\u003eMirka DEROS II 750 vs other orbital sanders: comparison table\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003eComparison with the DEROS II 5650, the DEROS II 125 mm, and market alternatives\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e is clearly positioned in the range as the \u003cstrong\u003ehigh-power 150 mm pad\u003c\/strong\u003e version. To help you choose, here is how it compares to other benchmarks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003ePower\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eMain Usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e750 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive bodywork, solid wood sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 5650\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e550 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile sanding, intermediate finish\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMirka DEROS II 125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e550 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eTight areas, fine bodywork, cabinetmaking\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/5\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e400 W\u003c\/td\u003e\n\n      \u003ctd\u003e5 mm\u003c\/td\u003e\n\n      \u003ctd\u003eWood finish, high-end carpentry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e710 W\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm\u003c\/td\u003e\n\n      \u003ctd\u003eLarge surface bodywork polishing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 750 outperforms the 5650\u003c\/strong\u003e in raw power: +200 W makes the difference on \u003cstrong\u003ehard surfaces or those loaded with material\u003c\/strong\u003e to be removed quickly.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the \u003cstrong\u003eFestool ETS EC 150\/5\u003c\/strong\u003e, the Mirka wins on motor power. The Festool remains relevant for \u003cstrong\u003every fine wood finishing\u003c\/strong\u003e, but it falls short for material removal tasks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRupes LHR 15\u003c\/strong\u003e targets polishing more with its 15 mm orbit. The DEROS II 750 and its 5 mm orbit are better suited for \u003cstrong\u003eprecise sanding and surface preparation\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary: the \u003cstrong\u003eDEROS II 750\u003c\/strong\u003e is the logical choice when you want the \u003cstrong\u003emaximum power of the Mirka range\u003c\/strong\u003e on a 150 mm pad, without sacrificing the precision of a short orbit.\u003c\/p\u003e\u003ch2\u003eCompatible accessories and recommended consumables for the DEROS II 750\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eMirka DEROS II 750\u003c\/strong\u003e works with the \u003cstrong\u003eMirka Abranet\u003c\/strong\u003e and \u003cstrong\u003eMirka Galaxy\u003c\/strong\u003e abrasive system, available in \u003cstrong\u003e150 mm\u003c\/strong\u003e discs with multi-hole Velcro backing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eAbranet\u003c\/strong\u003e discs are tailored for bodywork and carpentry: their net structure ensures \u003cstrong\u003eoptimal dust extraction\u003c\/strong\u003e and a longer lifespan compared to conventional abrasives.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor sensitive surfaces or lacquer finishes, \u003cstrong\u003eMirka Galaxy\u003c\/strong\u003e discs offer a \u003cstrong\u003econsistent grain\u003c\/strong\u003e and limit micro-scratches. Ideal before varnishing or polishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the essential consumables to plan for:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAbranet discs\u003c\/strong\u003e, P80 to P320 grits, general wood\/metal\/composite use\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eGalaxy discs\u003c\/strong\u003e, P120 to P500 grits, fine finishes and lacquers\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eMirka 150 mm replacement backing pad\u003c\/strong\u003e, replace as soon as visible wear occurs\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eMirka vacuum hose extension\u003c\/strong\u003e, for fixed stations with centralized extraction\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eHEPA filter\u003c\/strong\u003e for compatible Mirka DEROS vacuum (e.g., 1230 series)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe DEROS II 750 connects natively to \u003cstrong\u003eMirka vacuums\u003c\/strong\u003e via a 27 mm connection. An adapter also allows connection to the majority of third-party industrial vacuums.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we list all of these consumables to allow you to work without running out of stock.\u003c\/p\u003e\u003ch2\u003eFAQ - Mirka DEROS II 750\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between the DEROS II 750 and the DEROS II 650?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDEROS II 750\u003c\/strong\u003e runs at 750 W at maximum power, compared to 650 W for the 650 version. It is therefore better suited for \u003cstrong\u003eintensive sanding\u003c\/strong\u003e tasks on large surfaces, particularly in bodywork or on wood panels.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. Is the DEROS II 750 compatible with Mirka Abranet abrasives?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003cstrong\u003e150 mm\u003c\/strong\u003e pad accepts all Mirka \u003cstrong\u003eVelcro\u003c\/strong\u003e-backed abrasives, including Abranet, Basecut, or Galaxy. These abrasives are designed to maximize dust extraction through the holes in the pad.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Do you need a specific extractor to remove dust?\u003c\/h3\u003e\n\u003cp\u003eThe DEROS II 750 connects to any \u003cstrong\u003edust extractor\u003c\/strong\u003e equipped with a 27 mm fitting. Mirka recommends its own extractors (DEROS, DEOS) for \u003cstrong\u003eoptimal extraction efficiency\u003c\/strong\u003e, but a commercial class L or M extractor works very well.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Can the DEROS II 750 be used in a vertical position, on walls or ceilings?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003cstrong\u003ecompact and lightweight\u003c\/strong\u003e design of the DEROS II (less than 900 g) facilitates work in a vertical position or overhead. This is a concrete advantage for finishing partitions or preparing ceilings before painting.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What grit range is recommended with this sander?\u003c\/h3\u003e\n\u003cp\u003eFor \u003cstrong\u003ecoarse sanding\u003c\/strong\u003e, P80 to P120 grits are used. For finishing and primer preparation, move to P180, P240, or even P320. The DEROS II 750 handles this entire range without any problems.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. Is the speed adjustable?\u003c\/h3\u003e\n\u003cp\u003eYes. The DEROS II 750 has an \u003cstrong\u003eelectronic speed control\u003c\/strong\u003e integrated into the handle. You can adjust the rotation speed according to the material and grain used, which prevents burning the surface on sensitive materials such as lacquers or fresh varnishes.\u003c\/p\u003e","brand":"Mirka","offers":[{"title":"Without storage case","offer_id":58488315249023,"sku":"MIRKA_MID7504044","price":614.01,"currency_code":"EUR","in_stock":true},{"title":"With storage case","offer_id":58488315281791,"sku":"MIRKA_MID7504044CA","price":697.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-mirkaR-deros-ii-750.jpg?v=1789990351"},{"product_id":"meuleuse-d-angle-sans-fil-fein-ccg-18-125-12-as","title":"FEIN CCG 18-125-12 AS Cordless Angle Grinder","description":"\u003ch2\u003eFEIN CCG 18-125-12 AS Cordless Angle Grinder, Full Presentation\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN CCG 18-125-12 AS\u003c\/strong\u003e is an \u003cstrong\u003e18V cordless angle grinder\u003c\/strong\u003e built for demanding work on construction sites or in the workshop.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eIts brushless motor delivers constant power, even under load, for \u003cstrong\u003egrinding, cutting, and sanding\u003c\/strong\u003e without compromise.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eWith its \u003cstrong\u003eQuickIN\u003c\/strong\u003e system and restart protection, it combines \u003cstrong\u003esafety and productivity\u003c\/strong\u003e in everyday use.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eA \u003cstrong\u003eprofessional FEIN\u003c\/strong\u003e tool distributed by Dagobert Industrie, reliable, robust, ready to use.\u003c\/p\u003e\u003ch2\u003ePresentation of the FEIN CCG 18-125-12 AS: a high-performance cordless grinder\u003c\/h2\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN CCG 18-125-12 AS\u003c\/strong\u003e is an 18V cordless angle grinder designed for professionals who refuse to compromise between mobility and power.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt accepts \u003cstrong\u003e125 mm discs\u003c\/strong\u003e and features a high-efficiency brushless motor. The result: a no-load speed reaching \u003cstrong\u003e9,000 rpm\u003c\/strong\u003e, sufficient for cutting, grinding, and sanding steel, stainless steel, or stone.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith the \u003cstrong\u003e12 Ah battery provided\u003c\/strong\u003e, battery life is clearly sufficient for extended work sessions without returning to the charger.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eDesign and ergonomics of the CCG 18-125-12 AS\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFEIN has refined the balance of the machine to reduce fatigue during long-term use. The \u003cstrong\u003ecompact body\u003c\/strong\u003e facilitates work in hard-to-reach areas.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eRestart protection\u003c\/strong\u003e is integrated: if the battery is removed while under load and then reinserted, the grinder will not start on its own. A real plus for site safety.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eKey highlights to note:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eSoft-start system\u003c\/strong\u003e to limit jolts during startup\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eElectronic speed regulation\u003c\/strong\u003e under load to maintain performance\u003c\/li\u003e\n\n  \u003cli\u003eSide handle adjustable to \u003cstrong\u003e3 positions\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eTool-free adjustable safety guard\u003c\/li\u003e\n\n  \u003cli\u003eSpindle lock system for quick disc changes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to a standard corded grinder like the \u003cstrong\u003eFEIN WSG 17-125 P\u003c\/strong\u003e, the CCG 18-125-12 AS offers total freedom of movement without sacrificing torque or motor durability.\u003c\/p\u003e\u003ch2\u003eTechnical specifications of the FEIN CCG 18-125-12 AS cordless angle grinder\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN CCG 18-125-12 AS\u003c\/strong\u003e is an 18V cordless angle grinder equipped with a \u003cstrong\u003e125 mm\u003c\/strong\u003e disc. It runs at \u003cstrong\u003e9,000 rpm\u003c\/strong\u003e at no-load, placing it in the category of high-performance grinders for intensive use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ebrushless\u003c\/strong\u003e motor optimizes energy efficiency and extends the tool's lifespan. Less maintenance, more power delivered to the grinding wheel.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is delivered with a high-capacity \u003cstrong\u003e18 V \/ 12 Ah battery\u003c\/strong\u003e. This high autonomy is suitable for construction sites where power outlets are rare or absent.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN AUTOSTOP\u003c\/strong\u003e system automatically stops the disc in the event of a blockage. It is an active safety feature that protects the user and the tool in jamming situations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe total weight (with battery) remains contained for a machine of this capacity, which limits fatigue during long work sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eFeature\u003c\/th\u003e\n\n      \u003cth\u003eFEIN CCG 18-125-12 AS\u003c\/th\u003e\n\n      \u003cth\u003eMakita DGA504\u003c\/th\u003e\n\n      \u003cth\u003eBosch GWS 18V-10\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBattery voltage\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e18 V\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDisc diameter\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e125 mm\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e100 mm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eNo-load speed\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e9,000 rpm\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e8,500 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e11,000 rpm\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBrushless motor\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eYes\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n      \u003ctd\u003eYes\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eBattery capacity included\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e12 Ah\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eNot included\u003c\/td\u003e\n\n      \u003ctd\u003eNot included\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eAnti-blocking safety\u003c\/td\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eAUTOSTOP\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eYes (KickBack)\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCCG 18-125-12 AS\u003c\/strong\u003e is distinguished in particular by its included 12 Ah battery and its AUTOSTOP system, two features absent or partial on equivalent competing models.\u003c\/p\u003e\u003ch2\u003eApplications and areas of use for the FEIN CCG 18-125-12 AS\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN CCG 18-125-12 AS\u003c\/strong\u003e is designed for demanding work on construction sites, in workshops, or for industrial maintenance. Being cordless, it follows the user everywhere without the constraints of a cable.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt excels in \u003cstrong\u003egrinding, cutting, deburring, and sanding\u003c\/strong\u003e operations on a wide variety of materials. Its \u003cstrong\u003e125 mm\u003c\/strong\u003e disc covers the common uses of metalworkers, boilermakers, or locksmiths.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThanks to its \u003cstrong\u003eAS (AutoStop)\u003c\/strong\u003e system, it features an automatic disc stop brake. A major safety asset on sites where prevention standards are strict.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eCompatible materials and recommended accessories\u003c\/h3\u003e\u003cbr\u003e\n\n\u003cp\u003eThe CCG 18-125-12 AS works efficiently on:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eSteel and stainless steel\u003c\/strong\u003e, grinding, cutting, deburring weld seams\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eAluminum\u003c\/strong\u003e, surface finishing and light finishing\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eStone and concrete\u003c\/strong\u003e, with a suitable diamond disc\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eComposite materials\u003c\/strong\u003e, cutting and sanding with specific discs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRecommended accessories depend on the application. For \u003cstrong\u003estainless steel\u003c\/strong\u003e, prioritize discs free of iron and sulfur. For \u003cstrong\u003econcrete\u003c\/strong\u003e, a segmented diamond disc is essential.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eDisc diameter\u003c\/th\u003e\n\n      \u003cth\u003eVoltage\u003c\/th\u003e\n\n      \u003cth\u003eAutomatic stop\u003c\/th\u003e\n\n      \u003cth\u003eMain use\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eFEIN CCG 18-125-12 AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003eYes (AutoStop)\u003c\/td\u003e\n\n      \u003ctd\u003eGrinding, cutting, stainless steel, steel\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFEIN CCG 18-115-12 BL\u003c\/td\u003e\n\n      \u003ctd\u003e115 mm\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eLight grinding, steel\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMakita DGA504\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile site use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eMilwaukee M18 CAG125X\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e18 V\u003c\/td\u003e\n\n      \u003ctd\u003eNo\u003c\/td\u003e\n\n      \u003ctd\u003eIntensive steel grinding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend the CCG 18-125-12 AS for all professionals who work on varied materials and cannot afford to switch machines based on the substrate.\u003c\/p\u003e\u003ch2\u003eComparison: FEIN CCG 18-125-12 AS versus other 18V cordless angle grinders\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe market for \u003cstrong\u003e18V cordless angle grinders\u003c\/strong\u003e is dense. Makita, Bosch, Milwaukee, Metabo... all offer competitive models. Here is where the \u003cstrong\u003eFEIN CCG 18-125-12 AS\u003c\/strong\u003e stands.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe FEIN is distinguished first by its \u003cstrong\u003ehigh-frequency brushless motor\u003c\/strong\u003e, inherited from the professional FEIN range. It spins faster, heats up less, and lasts longer than the majority of competing brushless motors in this segment.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe other strength: the \u003cstrong\u003eFEIN SafetyCell\u003c\/strong\u003e system, which simultaneously protects the battery and the tool against overload, overheating, and deep discharge. This is a real advantage in intensive use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eBrand\u003c\/th\u003e\n\n      \u003cth\u003eDisc\u003c\/th\u003e\n\n      \u003cth\u003eNo-load speed\u003c\/th\u003e\n\n      \u003cth\u003eWeight (without battery)\u003c\/th\u003e\n\n      \u003cth\u003eSoft-start\u003c\/th\u003e\n\n      \u003cth\u003eElectronic brake\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eCCG 18-125-12 AS\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eFEIN\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e9,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e1.8 kg\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDGA504\u003c\/td\u003e\n\n      \u003ctd\u003eMakita\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e8,500 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e1.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGWS 18V-10\u003c\/td\u003e\n\n      \u003ctd\u003eBosch Professional\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e9,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e2.0 kg\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eM18 FDAG125\u003c\/td\u003e\n\n      \u003ctd\u003eMilwaukee\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e9,000 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e2.0 kg\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eW 18 LTX 125\u003c\/td\u003e\n\n      \u003ctd\u003eMetabo\u003c\/td\u003e\n\n      \u003ctd\u003e125 mm\u003c\/td\u003e\n\n      \u003ctd\u003e9,600 rpm\u003c\/td\u003e\n\n      \u003ctd\u003e1.8 kg\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n      \u003ctd\u003e✓\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eOn paper, the figures are similar. The difference is felt in use: the \u003cstrong\u003eFEIN mechanical finish\u003c\/strong\u003e, the quality of the gears, and the robustness of the housing place the CCG 18-125-12 AS a notch above in terms of longevity.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe Metabo W 18 LTX 125 shows a slightly higher speed. But the FEIN compensates with \u003cstrong\u003ebetter electronic management\u003c\/strong\u003e and more consistent torque under load.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor daily professional use, the \u003cstrong\u003eCCG 18-125-12 AS remains a benchmark\u003c\/strong\u003e in this segment. At Dagobert Industrie, it is one of the most popular models for metalworkers and boilermakers.\u003c\/p\u003e\u003ch2\u003eIncluded equipment and compatibility with the FEIN 18V range\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eFEIN CCG 18-125-12 AS\u003c\/strong\u003e is delivered in a case with everything needed to start immediately on site.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe box content includes:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e1 \u003cstrong\u003eCCG 18-125-12 AS\u003c\/strong\u003e cordless angle grinder\u003c\/li\u003e\n\n  \u003cli\u003e2 \u003cstrong\u003e18 V \/ 6.0 Ah\u003c\/strong\u003e FEIN AMPShare batteries\u003c\/li\u003e\n\n  \u003cli\u003e1 \u003cstrong\u003eALG 50\u003c\/strong\u003e rapid charger\u003c\/li\u003e\n\n  \u003cli\u003e1 safety guard\u003c\/li\u003e\n\n  \u003cli\u003e1 side handle\u003c\/li\u003e\n\n  \u003cli\u003e1 quick-clamping nut\u003c\/li\u003e\n\n  \u003cli\u003e1 rigid transport case\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe machine is compatible with the entire range of \u003cstrong\u003eFEIN AMPShare 18 V\u003c\/strong\u003e batteries. This shared system allows the same battery to be used on all FEIN 18 V tools: drills, oscillating saws, vacuums.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eAMPShare\u003c\/strong\u003e system is also interoperable with \u003cstrong\u003eMakita 18 V LXT\u003c\/strong\u003e batteries via a dedicated adapter, which broadens compatibility on construction sites already equipped with Makita.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e6.0 Ah\u003c\/strong\u003e batteries provided offer sufficient autonomy for prolonged grinding sessions without interruption. The ALG 50 rapid charger charges an empty battery in about 55 minutes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith two batteries included, you work continuously: one charging while the other powers the machine. A concrete advantage on sites far from an outlet.\u003c\/p\u003e\u003ch2\u003eFAQ - FEIN CCG 18-125-12 AS\u003c\/h2\u003e\n\u003cbr\u003e\n\n\u003ch3\u003e1. What is the disc capacity and no-load speed?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFEIN CCG 18-125-12 AS\u003c\/strong\u003e accepts \u003cstrong\u003e125 mm diameter\u003c\/strong\u003e discs. Its no-load speed reaches \u003cstrong\u003e9,000 rpm\u003c\/strong\u003e, placing it in the standard for professional compact angle grinders.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. How long does the battery last on a construction site?\u003c\/h3\u003e\n\u003cp\u003eIt is delivered with an \u003cstrong\u003e18 V \/ 12 Ah battery\u003c\/strong\u003e from the FEIN AMPShare range. It is one of the highest capacities on the market in this format.\u003c\/p\u003e\n\u003cp\u003eConcretely, this allows for prolonged grinding sessions without interruption, even on thick pieces or weld seams that need finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is it compatible with other brands' batteries?\u003c\/h3\u003e\n\u003cp\u003eThe CCG 18-125-12 AS uses the \u003cstrong\u003eFEIN AMPShare\u003c\/strong\u003e platform, which is compatible with \u003cstrong\u003eBosch ProCORE 18 V\u003c\/strong\u003e batteries. This is a concrete advantage if you already have Bosch Professional batteries on the site.\u003c\/p\u003e\n\u003cp\u003eOutside of this cross-compatibility, other brands' batteries (Milwaukee, Makita, Metabo...) are not interchangeable.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Is the soft-start system really useful?\u003c\/h3\u003e\n\u003cp\u003eYes. The \u003cstrong\u003esoft start\u003c\/strong\u003e avoids wrist jerk at startup, especially with a diamond or flap disc. It is an important safety point for fragile workpieces or finishing tasks.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. What is the difference compared to the FEIN CCG 18-125-10 AS?\u003c\/h3\u003e\n\u003cp\u003eThe main difference is the \u003cstrong\u003ebattery capacity\u003c\/strong\u003e: 12 Ah on the CCG 18-125-12 AS versus 10 Ah on the previous version. Autonomy is therefore approximately 20% higher.\u003c\/p\u003e\n\u003cp\u003eThe motor, speed, and dimensions remain identical. The choice depends solely on the expected intensity of use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. For which materials is this grinder suitable?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for \u003cstrong\u003esteel, stainless steel, cast iron, and light masonry\u003c\/strong\u003e with the appropriate discs. For stainless steel, remember to use a specific disc free of iron and sulfur to avoid surface contamination.\u003c\/p\u003e\n\u003cp\u003eIt is not designed for continuous cutting of thick tile or reinforced concrete: prefer a corded grinder of higher power for these intensive uses.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"125","offer_id":58488298668415,"sku":"FEIN_71221661000","price":454.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-d-angle-sans-fil-fein-ccg-18-125-12-as.jpg?v=1789990404"},{"product_id":"meuleuse-d-angle-fein-cg-15-125-blp","title":"Angle grinder FEIN CG 15-125 BLP","description":"\u003ch2\u003eFEIN CG 15-125 BLP angle grinder: compact and brushless, Ø 125 mm\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN CG 15-125 BLP\u003c\/strong\u003e is a compact Ø 125 mm angle grinder that is dust-resistant, powerful, and low-maintenance. It is equipped with the FEIN PowerDrive brushless motor and a dead-man switch. It is designed for cutting, grinding, and deburring in demanding working environments.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eLong service life thanks to the PowerDrive brushless motor, enclosed motor housing, and separately mounted electronics\u003c\/li\u003e\n\n\u003cli\u003eMotor protection against aggressive ceramic and mineral dust\u003c\/li\u003e\n\n\u003cli\u003eUser safety: soft start, restart protection, stall monitoring, electronic overload protection, kickback control, and brake\u003c\/li\u003e\n\n\u003cli\u003eAnti-vibration handle that improves grip by up to 16% compared to standard handles\u003c\/li\u003e\n\n\u003cli\u003eQuick-clamping nut included for tool-free consumable changes\u003c\/li\u003e\n\n\u003cli\u003eCarabiner ring to prevent falls from heights\u003c\/li\u003e\n\n\u003cli\u003e4 m H07 industrial cable\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower input\u003c\/td\u003e\n\n\u003ctd\u003e1,500 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower output\u003c\/td\u003e\n\n\u003ctd\u003e1,050 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMotor\u003c\/td\u003e\n\n\u003ctd\u003eBrushless\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNo-load speed\u003c\/td\u003e\n\n\u003ctd\u003e3,800 to 9,000 rpm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDisc diameter\u003c\/td\u003e\n\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting\u003c\/td\u003e\n\n\u003ctd\u003eM 14\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSwitch\u003c\/td\u003e\n\n\u003ctd\u003eDead-man\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e2.30 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProtective guard\u003c\/li\u003e\n\n\u003cli\u003eQuick-clamping nut\u003c\/li\u003e\n\n\u003cli\u003eAnti-vibration handle\u003c\/li\u003e\n\n\u003cli\u003eSpanner wrench\u003c\/li\u003e\n\n\u003cli\u003eCutting guard\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official FEIN distributor, you will also find the discs and abrasives suitable for this grinder.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Default Title","offer_id":59082316153215,"sku":"FEIN_72250860000","price":406.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-d-angle-fein-cg-15-125-blp.png?v=1793787108"},{"product_id":"ponceuse-pour-tubes-fein-rs-17-70-e","title":"FEIN RS 17-70 E Tube Sander","description":"\u003ch2\u003eFEIN RS 17-70 E Tube Sander: 8 to 80 mm Stainless Steel Tubes and Elbows\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN RS 17-70 E\u003c\/strong\u003e is a sander designed for sanding stainless steel tubes and elbows up to 80 mm in diameter. It offers high efficiency for removing weld seams and achieving a uniform finish.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEfficient removal of weld seams thanks to the linear speed of the abrasive belts\u003c\/li\u003e\n\n\u003cli\u003eContinuously adjustable rotation speed: sanding, satin finishing, brushing, and high-gloss polishing\u003c\/li\u003e\n\n\u003cli\u003eFlexible belts that conform to narrow elbows\u003c\/li\u003e\n\n\u003cli\u003e360° peripheral sanding in just two passes\u003c\/li\u003e\n\n\u003cli\u003eOptional guide rollers for tight spaces\u003c\/li\u003e\n\n\u003cli\u003eProtection against accidental restart and soft start\u003c\/li\u003e\n\n\u003cli\u003eDust-protected ball bearings\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\n\u003ctd\u003e1,700 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\n\u003ctd\u003e1,000 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNo-load speed\u003c\/td\u003e\n\n\u003ctd\u003e2,700 to 8,500 rpm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBelt speed\u003c\/td\u003e\n\n\u003ctd\u003e9 to 27 m\/s\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTube diameter\u003c\/td\u003e\n\n\u003ctd\u003e8 to 80 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBelt dimensions\u003c\/td\u003e\n\n\u003ctd\u003e20\/40 x 815 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMinimum wall clearance\u003c\/td\u003e\n\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCable with plug\u003c\/td\u003e\n\n\u003ctd\u003e4 m\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e4.30 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official FEIN distributor, you will also find abrasive belts and accessories for this sander.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Default Title","offer_id":59082316349823,"sku":"FEIN_72227560000","price":1794.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-pour-tubes-fein-rs-17-70-e.png?v=1793787119"},{"product_id":"meuleuse-d-angle-fein-cg-7-125","title":"Angle Grinder FEIN CG 7-125","description":"\u003ch2\u003eFEIN CG 7-125 Angle Grinder: Compact 750 W for Light Grinding and Cutting\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN CG 7-125\u003c\/strong\u003e is a compact 750 W, Ø 125 mm angle grinder, ideal for light grinding and cutting. It is suitable for deburring, rough grinding, and cutting, and features restart protection.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower input\u003c\/td\u003e\n\n\u003ctd\u003e750 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower output\u003c\/td\u003e\n\n\u003ctd\u003e440 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMotor\u003c\/td\u003e\n\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSwitch\u003c\/td\u003e\n\n\u003ctd\u003eLock-on\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNo-load speed\u003c\/td\u003e\n\n\u003ctd\u003e12,000 rpm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDisc diameter\u003c\/td\u003e\n\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e1.80 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003ePackage Contents\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e1 protective guard\u003c\/li\u003e\n\n\u003cli\u003e1 protective cover for cutting discs\u003c\/li\u003e\n\n\u003cli\u003e1 pair of flanges\u003c\/li\u003e\n\n\u003cli\u003e1 additional handle\u003c\/li\u003e\n\n\u003cli\u003e1 pin wrench\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official FEIN distributor, you will also find the discs and abrasives suitable for this grinder.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Default Title","offer_id":59082317726079,"sku":"FEIN_72250460000","price":118.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-d-angle-fein-cg-7-125.png?v=1793787129"},{"product_id":"meuleuse-droite-sans-fil-fein-agsz-18-280-bl-as","title":"FEIN AGSZ 18-280 BL AS Cordless Straight Grinder","description":"\u003ch2\u003eFEIN AGSZ 18-280 BL AS cordless angle grinder: compact and dust-resistant\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN AGSZ 18-280 BL AS\u003c\/strong\u003e is a compact and powerful 18 V cordless angle grinder. Dust-protected, it is used for cutting, grinding, deburring, and milling. It is sold without a battery.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eNext-generation FEIN PowerDrive brushless motor, motor housing sealed against ceramic and mineral dust\u003c\/li\u003e\n\n\u003cli\u003eElectronic speed preselection in continuous steps, from 9,000 to 28,000 rpm\u003c\/li\u003e\n\n\u003cli\u003e30% higher efficiency than comparable 1,100 W universal motors\u003c\/li\u003e\n\n\u003cli\u003eSmooth and low-vibration operation: motor decoupled from the housing, with four vibration dampers\u003c\/li\u003e\n\n\u003cli\u003eSoft start, restart protection and electronic overload protection\u003c\/li\u003e\n\n\u003cli\u003eCollet nut with side lock to protect the workpiece and prevent the wrench from slipping\u003c\/li\u003e\n\n\u003cli\u003eIntegrated LED work area lighting\u003c\/li\u003e\n\n\u003cli\u003eCompatible with AMPShare ProCORE 18 V batteries and chargers, as well as with Bosch Professional 18 V cordless tools\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\n\u003ctd\u003e18 V (AMPShare interface)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMotor\u003c\/td\u003e\n\n\u003ctd\u003eBrushless\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNo-load speed\u003c\/td\u003e\n\n\u003ctd\u003e9,000 to 28,000 rpm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMax. grinding disc Ø\u003c\/td\u003e\n\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMax. collet Ø\u003c\/td\u003e\n\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMax. milling bit Ø\u003c\/td\u003e\n\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight without battery\u003c\/td\u003e\n\n\u003ctd\u003e1.35 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e1 cordless angle grinder\u003c\/li\u003e\n\n\u003cli\u003e1 6 mm collet\u003c\/li\u003e\n\n\u003cli\u003e1 SW13 open-ended wrench\u003c\/li\u003e\n\n\u003cli\u003e1 SW17 open-ended wrench\u003c\/li\u003e\n\n\u003cli\u003e1 L-BOXX 238 plastic tool case\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official FEIN distributor, you will also find compatible batteries and accessories.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Default Title","offer_id":59082319954303,"sku":"FEIN_71230461000","price":384.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/meuleuse-droite-sans-fil-fein-agsz-18-280-bl-as.png?v=1793787141"},{"product_id":"polisseuse-d-angle-fein-wpo-14-25-e","title":"Angle Grinder FEIN WPO 14-25 E","description":"\u003ch2\u003eFEIN WPO 14-25 E angle polisher: from sanding to polishing stainless steel, Ø 230 mm\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN WPO 14-25 E\u003c\/strong\u003e is a very powerful angle machine designed for working stainless steel, from sanding to polishing. It can be used as a sander, polisher, or satin finisher, with a Ø 230 mm backing pad and polishing tools.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eHigh torque even at low speeds, thanks to mechanical reduction gearing and a high-performance FEIN motor\u003c\/li\u003e\n\n\u003cli\u003eContinuously variable speed from 900 to 2,500 rpm: sanding, satin finishing, brushing, and high-gloss polishing\u003c\/li\u003e\n\n\u003cli\u003eCarefully designed ergonomics, with controls accessible to both right- and left-handed users\u003c\/li\u003e\n\n\u003cli\u003eSpindle lock, restart protection, and soft start\u003c\/li\u003e\n\n\u003cli\u003e4 m H07 industrial cable, dust-protected bearings, and brushes with wear indicators\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\n\u003ctd\u003e1,200 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOutput power\u003c\/td\u003e\n\n\u003ctd\u003e750 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDiameter of backing pad and polishing tool\u003c\/td\u003e\n\n\u003ctd\u003e230 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNo-load speed\u003c\/td\u003e\n\n\u003ctd\u003e900 to 2,500 rpm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting thread\u003c\/td\u003e\n\n\u003ctd\u003eM 14\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCable with plug\u003c\/td\u003e\n\n\u003ctd\u003e4 m\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e2.50 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eThe polisher is available as the machine only, or as a stainless steel polishing set to get started with the right accessories.\u003c\/p\u003e\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official FEIN distributor, you can also find polishing wheels and accessories.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Machine only","offer_id":59082320347519,"sku":"FEIN_72214900230","price":753.6,"currency_code":"EUR","in_stock":true},{"title":"Stainless steel polishing set","offer_id":59082320380287,"sku":"FEIN_72214950010","price":1238.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/polisseuse-d-angle-fein-wpo-14-25-e.png?v=1793787161"},{"product_id":"multimaster-sans-fil-fein-amm-500-plus","title":"FEIN AMM 500 Plus Cordless Multi-Master","description":"\u003ch2\u003eFEIN AMM 500 Plus Cordless Multimaster 4 Ah: 18 V Multifunction Oscillating Tool\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eFEIN AMM 500 Plus\u003c\/strong\u003e is an 18 V cordless multifunction oscillating tool, supplied in a carrying bag with 18 cutting and sanding accessories, a 4 Ah 18 V battery and a fast charger.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAnti-vibration system for comfortable and safe working\u003c\/li\u003e\n\n\u003cli\u003eStarlockPlus tool mount: lossless power transmission for greater precision and progress\u003c\/li\u003e\n\n\u003cli\u003eQuickIN tool change in less than 3 seconds, tool-free\u003c\/li\u003e\n\n\u003cli\u003eAccess to approximately 100 FEIN Starlock and StarlockPlus accessories\u003c\/li\u003e\n\n\u003cli\u003eDC motor with tachymetric generator: constant speed even under load, continuous electronic speed control\u003c\/li\u003e\n\n\u003cli\u003eAll-metal gearbox\u003c\/li\u003e\n\n\u003cli\u003eElectronic Cell Protection (ECP) and COOLPACK battery technology\u003c\/li\u003e\n\n\u003cli\u003eCompatible with AMPShare and Bosch Professional 18 V batteries\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\n\u003cthead\u003e\u003ctr\u003e\n\n\u003cth\u003eSpecification\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBattery voltage\u003c\/td\u003e\n\n\u003ctd\u003e18 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBattery capacity\u003c\/td\u003e\n\n\u003ctd\u003e4 Ah\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOscillations\u003c\/td\u003e\n\n\u003ctd\u003e11,000 to 18,500 \/min\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAmplitude\u003c\/td\u003e\n\n\u003ctd\u003e2 x 1.7°\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eTool holder\u003c\/td\u003e\n\n\u003ctd\u003eStarlockPlus\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight without battery\u003c\/td\u003e\n\n\u003ctd\u003e1.30 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003ePackage Contents\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e1 cordless Multimaster AMM 500\u003c\/li\u003e\n\n\u003cli\u003e1 SLP E-Cut LL BIM 50x50 saw blade\u003c\/li\u003e\n\n\u003cli\u003e1 SLP E-Cut LL BIM 50x35 saw blade\u003c\/li\u003e\n\n\u003cli\u003eUnperforated sanding sheets (5 of each grit K60, K80, K120)\u003c\/li\u003e\n\n\u003cli\u003e1 unperforated sanding pad\u003c\/li\u003e\n\n\u003cli\u003e1 18 V 4 Ah Li-ion battery\u003c\/li\u003e\n\n\u003cli\u003e1 GAL 1880 CV AS fast charger\u003c\/li\u003e\n\n\u003cli\u003e1 nylon bag\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, an official FEIN distributor, you will also find compatible Starlock accessories.\u003c\/p\u003e","brand":"Fein","offers":[{"title":"Default Title","offer_id":59082321396095,"sku":"FEIN_71293870000","price":430.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/multimaster-sans-fil-fein-amm-500-plus.png?v=1793787173"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/collections\/meuleuse-d-angle-sans-fil-fein-ccg-18-125-12-as.jpg?v=1790067995","url":"https:\/\/dagobertindustrie.com\/en\/collections\/power-tools.oembed?page=2","provider":"Dagobert Industrie","version":"1.0","type":"link"}