{"title":"Machine spare parts (other)","description":"\u003cp\u003eSpare parts for welding machines of brands other than ESAB, FRONIUS and HYPERTHERM.\u003c\/p\u003e\u003cp\u003eCheck the reference or the product page before ordering.\u003c\/p\u003e","products":[{"product_id":"ruban-a-transfert-3m-465","title":"3M™ 465 Transfer Tape","description":"\u003cp\u003e\u003cstrong\u003e3M 465 adhesive transfer tape\u003c\/strong\u003e is an unsupported acrylic adhesive: a film of adhesive alone, supplied on a release liner. Once applied and the liner removed, only the adhesive remains between the two parts, with no carrier thickness.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eType\u003c\/strong\u003e: adhesive transfer tape, unsupported.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eAdhesive\u003c\/strong\u003e: acrylic.\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFormat\u003c\/strong\u003e: 19 mm x 50 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThe adhesive transfer principle\u003c\/h2\u003e\n\u003cp\u003eA conventional double-sided tape consists of a carrier (film, paper, foam) coated with adhesive on each side. Transfer tape removes the carrier: you get the thinnest possible bond, which follows the surfaces perfectly and adds no extra thickness.\u003c\/p\u003e\n\u003cp\u003eApply it to the first part, press it down, remove the liner, then apply the second part. The adhesive \"transfers\" from the liner to the part, hence its name.\u003c\/p\u003e\n\n\u003ch2\u003eTypical uses\u003c\/h2\u003e\n\u003cp\u003eMounting nameplates, membranes and front panels, laminating films and graphics, assembling thin parts, fixing gaskets or foams before final assembly. It is suitable whenever an assembly must stay flat and discreet.\u003c\/p\u003e\n\n\u003ch2\u003eA successful bond\u003c\/h2\u003e\n\u003cp\u003eAn acrylic adhesive reaches its strength through two factors: pressure and time. Press firmly after application: an adhesive that is merely laid down is only in contact with part of the surface. The bond then continues to build over the following hours.\u003c\/p\u003e\n\u003cp\u003eSurfaces must be clean, dry and degreased, for example with isopropyl alcohol.\u003c\/p\u003e\n\n\u003cp\u003eSee also our \u003ca href=\"\/en\/collections\/double-sided-adhesive-transfer-tape\"\u003eadhesive transfer tapes\u003c\/a\u003e, our \u003ca href=\"\/en\/collections\/double-sided-adhesive-tape\"\u003edouble-sided tapes\u003c\/a\u003e and our \u003ca href=\"\/en\/collections\/3m\"\u003e3M products\u003c\/a\u003e.\u003c\/p\u003e","brand":"3M™","offers":[{"title":"19 \/ 50","offer_id":58488346739071,"sku":"3M_7000116597","price":20.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ruban-a-transfert-3m-465.jpg?v=1789989883"},{"product_id":"arceau-antibruit-coverguardr-earliner-30230","title":"Coverguard® Earline® 30230 Banded Earplugs","description":"\u003ch2\u003eCoverguard® Earline® 30230 earband: lightweight and effective hearing protection\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eCoverguard® Earline® 30230 earband\u003c\/strong\u003e effectively protects hearing in noisy environments without restricting movement.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eunder-the-chin band\u003c\/strong\u003e format is ideal for helmet wearers: it slips on easily and stays in place all day.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eLightweight and discreet, it offers a reliable \u003cstrong\u003esound attenuation level\u003c\/strong\u003e for intensive use in industrial environments or on construction sites.\u003c\/p\u003e\u003ch2\u003ePresentation of the Coverguard® Earline® 30230 earband\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eCoverguard® Earline® 30230 earband\u003c\/strong\u003e is a lightweight hearing protection solution designed for work environments exposed to moderate noise levels.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003cp\u003eIts \u003cstrong\u003eearband\u003c\/strong\u003e format distinguishes it from traditional earmuffs. It can be worn around the neck or under the chin, which facilitates quickly switching from the wearing position to the rest position.\u003c\/p\u003e\n\n\u003cbr\u003e\n\u003cp\u003eIt is a practical choice for operators who regularly move in and out of noisy areas. There is no need to completely remove the protection each time.\u003c\/p\u003e\n\n\n\u003ch3\u003eTechnical characteristics and sound attenuation level\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cp\u003eThe 30230 features an \u003cstrong\u003eSNR (Single Number Rating)\u003c\/strong\u003e suitable for intermediate noise exposure. It meets the requirements of the \u003cstrong\u003eEN 352-2\u003c\/strong\u003e standard, which covers earplugs and similar devices.\u003c\/p\u003e\n\n\u003cp\u003eThe cushions are made of \u003cstrong\u003ememory foam\u003c\/strong\u003e, ensuring a good acoustic seal without excessive pressure. Prolonged wear remains comfortable.\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFormat:\u003c\/strong\u003e under-chin band \/ neck band\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eTip material:\u003c\/strong\u003e memory foam\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eStandard:\u003c\/strong\u003e EN 352-2\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eUsage:\u003c\/strong\u003e intermittent wear in moderately noisy areas\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eReusable:\u003c\/strong\u003e yes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this model for the \u003cstrong\u003econstruction, logistics, and light industry\u003c\/strong\u003e sectors, where the practicality of the earband format makes all the difference in daily operations.\u003c\/p\u003e\u003ch2\u003eDesign and ease of use of the Earline® 30230 earband\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eEarline® 30230\u003c\/strong\u003e earband from Coverguard is based on a streamlined design, intended for prolonged use without discomfort.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe band is made of \u003cstrong\u003eflexible stainless steel\u003c\/strong\u003e, which gives it both lightness and strength. It adapts easily to different head shapes.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003efoam cushions\u003c\/strong\u003e provide a soft rest on the ears. The pressure exerted remains moderate, which limits fatigue during continuous wear.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe earband format is particularly appreciated in environments where the operator must \u003cstrong\u003efrequently put on and take off their protection\u003c\/strong\u003e. The band slips around the neck between uses, without being cumbersome.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWith an \u003cstrong\u003eSNR of 23 dB\u003c\/strong\u003e, the 30230 is suitable for moderate-noise environments: workshops, logistics areas, light maintenance work. It is not designed for extreme noise exposure exceeding 100 dB continuously.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eProduct\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003eSNR\u003c\/th\u003e\n\n      \u003cth\u003eBand Material\u003c\/th\u003e\n\n      \u003cth\u003eTypical Usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\n\n\u003cstrong\u003eEarline® 30230\u003c\/strong\u003e (Coverguard)\u003c\/td\u003e\n\n      \u003ctd\u003eEarband\u003c\/td\u003e\n\n      \u003ctd\u003e23 dB\u003c\/td\u003e\n\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n\n      \u003ctd\u003eModerate noise, frequent wear\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eEarline® 30240 (Coverguard)\u003c\/td\u003e\n\n      \u003ctd\u003eEarband\u003c\/td\u003e\n\n      \u003ctd\u003e26 dB\u003c\/td\u003e\n\n      \u003ctd\u003eStainless steel\u003c\/td\u003e\n\n      \u003ctd\u003eMedium to high noise\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e3M™ E-A-R™ Push-Ins\u003c\/td\u003e\n\n      \u003ctd\u003eCordless plugs\u003c\/td\u003e\n\n      \u003ctd\u003e28 dB\u003c\/td\u003e\n\n      \u003ctd\u003ePU foam\u003c\/td\u003e\n\n      \u003ctd\u003eLong-term wear, single-use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eUvex 2112000\u003c\/td\u003e\n\n      \u003ctd\u003eEarband\u003c\/td\u003e\n\n      \u003ctd\u003e23 dB\u003c\/td\u003e\n\n      \u003ctd\u003eABS plastic\u003c\/td\u003e\n\n      \u003ctd\u003eModerate noise, industrial environment\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\u003ch2\u003eApplication areas and suitable work environments\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCoverguard® Earline® 30230 earband\u003c\/strong\u003e is designed for industrial environments where noise is present intermittently. Its earband design allows it to be put on and taken off quickly, without removing safety helmets.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is particularly suitable for jobs where the operator alternates between \u003cstrong\u003enoisy and quiet areas\u003c\/strong\u003e several times per hour. A forklift driver, maintenance technician, or assembly line operator are good examples.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the \u003cstrong\u003eindustry sectors\u003c\/strong\u003e best suited to this type of protection:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eManufacturing industry\u003c\/strong\u003e: presses, machine tools, assembly lines\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eLogistics and warehouses\u003c\/strong\u003e: loading docks, sorting areas\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eConstruction (BTP)\u003c\/strong\u003e: sites with moderate and discontinuous noise exposure\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFood industry\u003c\/strong\u003e: packaging workshops, cutting rooms\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMetallurgy\u003c\/strong\u003e: welding workshops, occasional grinding\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts earband format makes it unsuitable for \u003cstrong\u003every high and continuous noise\u003c\/strong\u003e exposure (greater than 105 dB). In this case, earmuffs such as the \u003cstrong\u003eCoverguard® Earline® 55 series\u003c\/strong\u003e or 3M™ Peltor™ earmuffs would be more appropriate.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor short and repeated interventions in \u003cstrong\u003emoderate noise level\u003c\/strong\u003e areas (85 to 100 dB), the Earline® 30230 offers a good balance between comfort, practicality, and \u003cstrong\u003eeffective hearing protection\u003c\/strong\u003e.\u003c\/p\u003e\u003ch2\u003eComparison: Earline® 30230 earband vs. other hearing protection on the market\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eChoosing hearing protection depends on the work context: duration of exposure, noise level, and frequency of putting on\/taking off. The \u003cstrong\u003eEarline® 30230 earband\u003c\/strong\u003e occupies a specific place in this ecosystem.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eComparison table: earbands, earplugs, and earmuffs\u003c\/h3\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eProduct\u003c\/th\u003e\n\n      \u003cth\u003eType\u003c\/th\u003e\n\n      \u003cth\u003eIndicative SNR\u003c\/th\u003e\n\n      \u003cth\u003ePut on\/Take off\u003c\/th\u003e\n\n      \u003cth\u003eLong-term comfort\u003c\/th\u003e\n\n      \u003cth\u003eTypical Usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eEarline® 30230 (Coverguard)\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eEarband\u003c\/td\u003e\n\n      \u003ctd\u003e~26 dB\u003c\/td\u003e\n\n      \u003ctd\u003eVery fast\u003c\/td\u003e\n\n      \u003ctd\u003eGood\u003c\/td\u003e\n\n      \u003ctd\u003eShort and repeated exposures\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFoam earplugs (e.g., 3M E-A-R Classic)\u003c\/td\u003e\n\n      \u003ctd\u003eDisposable plugs\u003c\/td\u003e\n\n      \u003ctd\u003e~28-36 dB\u003c\/td\u003e\n\n      \u003ctd\u003eSlow (needs shaping)\u003c\/td\u003e\n\n      \u003ctd\u003eVariable\u003c\/td\u003e\n\n      \u003ctd\u003eLong exposures, intense noise\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eReusable plugs with cord (e.g., Moldex Spark Plugs)\u003c\/td\u003e\n\n      \u003ctd\u003eReusable plugs\u003c\/td\u003e\n\n      \u003ctd\u003e~24-30 dB\u003c\/td\u003e\n\n      \u003ctd\u003eFast\u003c\/td\u003e\n\n      \u003ctd\u003eGood\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile, regular wear\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eEarmuffs (e.g., 3M Peltor H510A)\u003c\/td\u003e\n\n      \u003ctd\u003eHeadband earmuffs\u003c\/td\u003e\n\n      \u003ctd\u003e~26-35 dB\u003c\/td\u003e\n\n      \u003ctd\u003eVery fast\u003c\/td\u003e\n\n      \u003ctd\u003eExcellent\u003c\/td\u003e\n\n      \u003ctd\u003eLong exposures, high noise\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eUnder-helmet earmuffs (e.g., Uvex K10H)\u003c\/td\u003e\n\n      \u003ctd\u003eHelmet-integrated earmuffs\u003c\/td\u003e\n\n      \u003ctd\u003e~26-30 dB\u003c\/td\u003e\n\n      \u003ctd\u003eFast\u003c\/td\u003e\n\n      \u003ctd\u003eGood\u003c\/td\u003e\n\n      \u003ctd\u003eCombined with head protection\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eearband\u003c\/strong\u003e stands out for its speed of use: it slips under the chin or behind the neck in a second. Ideal when regularly entering and leaving a noisy area.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to \u003cstrong\u003efoam plugs\u003c\/strong\u003e, it loses a few decibels of attenuation but gains significantly in practicality. No need to get your hands dirty to insert them.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to \u003cstrong\u003eheadband earmuffs\u003c\/strong\u003e, it is more compact and less cumbersome, but offers slightly lower attenuation. It does not replace earmuffs for jobs exposed to more than 85 dB continuously.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCoverguard® Earline® 30230\u003c\/strong\u003e is therefore the right choice for occasional and repeated interventions, where speed takes precedence over maximum attenuation.\u003c\/p\u003e\u003ch2\u003eStandards and certifications of the Coverguard® Earline® 30230 earband\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCoverguard® Earline® 30230\u003c\/strong\u003e earband is \u003cstrong\u003eCE\u003c\/strong\u003e certified and meets the European standard \u003cstrong\u003eEN 352-2\u003c\/strong\u003e, which specifically covers earplug-type hearing protectors mounted on a band.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis standard ensures that the product has undergone rigorous testing in an accredited laboratory. It covers \u003cstrong\u003eacoustic attenuation\u003c\/strong\u003e, the mechanical strength of the band, and compatibility with prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSNR (Single Number Rating)\u003c\/strong\u003e value indicates the overall level of noise attenuation. The higher this number, the more effective the protection against noisy environments.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e30230\u003c\/strong\u003e is suitable for environments where the noise level exceeds \u003cstrong\u003e85 dB(A)\u003c\/strong\u003e, the legal threshold for noise exposure set by European Directive 2003\/10\/EC and transposed into French Labor Law.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary, the certifications to check for this product:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eCE\u003c\/strong\u003e marking mandatory for all PPE placed on the European market\u003c\/li\u003e\n\n  \u003cli\u003eCompliance with the \u003cstrong\u003eEN 352-2\u003c\/strong\u003e standard (earplugs on a band)\u003c\/li\u003e\n\n  \u003cli\u003eMeasured and documented \u003cstrong\u003eSNR\u003c\/strong\u003e value\u003c\/li\u003e\n\n  \u003cli\u003e\n\u003cstrong\u003eCategory II PPE\u003c\/strong\u003e classification (intermediate risks)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we only reference hearing protection that complies with current regulatory requirements. The \u003cstrong\u003eCoverguard® Earline® 30230\u003c\/strong\u003e is fully in line with this approach.\u003c\/p\u003e\u003ch2\u003eFAQ - Coverguard® Earline® 30230 earband\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the sound attenuation level of the Earline® 30230 earband?\u003c\/h3\u003e\n\u003cp\u003eThe Coverguard® Earline® 30230 earband offers an \u003cstrong\u003eSNR sound attenuation of 30 dB\u003c\/strong\u003e, making it a solution suitable for noisy environments of moderate to high levels (construction sites, workshops, light industry).\u003c\/p\u003e\n\u003cp\u003eIt is suitable for exposures up to approximately 105 dB(A), in accordance with hearing protection calculation recommendations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. What is the difference between an earband and traditional earmuffs?\u003c\/h3\u003e\n\u003cp\u003eAn \u003cstrong\u003eearband\u003c\/strong\u003e is worn under the chin, behind the neck, or under a hard hat. It is more compact and lighter than traditional earmuffs.\u003c\/p\u003e\n\u003cp\u003eIt is the ideal option when you frequently remove and put back on your protection, or when you are already wearing protective headgear.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is the 30230 earband compatible with a hard hat?\u003c\/h3\u003e\n\u003cp\u003eYes. Thanks to its \u003cstrong\u003eflexible band worn in the under-the-chin or nuchal position\u003c\/strong\u003e, the 30230 can be used without any problems under most protective helmets. This is one of its main advantages over front-band earmuffs.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Is it reusable and easy to maintain?\u003c\/h3\u003e\n\u003cp\u003eYes, the Earline® 30230 is \u003cstrong\u003ereusable equipment\u003c\/strong\u003e. The sealing cushions are replaceable, which extends the product's lifespan and limits long-term costs.\u003c\/p\u003e\n\u003cp\u003eRegularly cleaning the cushions with a damp cloth is enough to maintain good hygiene.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Who is this earband intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for all professionals exposed to noise on a regular but intermittent basis: \u003cstrong\u003eworkshop operators, maintenance technicians, construction agents\u003c\/strong\u003e, warehouse workers, etc.\u003c\/p\u003e\n\u003cp\u003eIts lightness and ease of setup make it a preferred choice for those who need to remove their protection several times an hour.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. What standard certifies the protection of the Earline® 30230 earband?\u003c\/h3\u003e\n\u003cp\u003eThe Coverguard® Earline® 30230 earband is certified \u003cstrong\u003eEN 352-2\u003c\/strong\u003e, the European standard that governs earplug-type hearing protectors, a category to which earbands belong.\u003c\/p\u003e\n\u003cp\u003eThis certification ensures that the product has been tested and validated for professional use as a \u003cstrong\u003ePPE (Personal Protective Equipment)\u003c\/strong\u003e of category II.\u003c\/p\u003e","brand":"Coverguard","offers":[{"title":"Default Title","offer_id":58480363897215,"sku":"COVE_30230","price":18.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/arceau-antibruit-coverguardR-earlineR-30230.jpg?v=1789989981"},{"product_id":"nettoyant-industriel-a-base-d-agrumes-3m","title":"3M™ Citrus-Based Industrial Cleaner","description":"\u003ch2\u003e3M™ Citrus-Based Industrial Cleaner: natural power for industrial degreasing\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003e3M™ Citrus-Based Industrial Cleaner\u003c\/strong\u003e attacks stubborn grease, oil, and residues without compromise. Its formula, based on \u003cstrong\u003enatural citrus extracts\u003c\/strong\u003e, offers serious degreasing power.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIdeal for workshops, production lines, and demanding environments. It cleans deeply while remaining more environmentally friendly than conventional \u003cstrong\u003echemical solvents\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAn effective, versatile \u003cstrong\u003eindustrial degreaser\u003c\/strong\u003e from \u003cstrong\u003e3M™\u003c\/strong\u003e, a brand with a proven track record.\u003c\/p\u003e\u003ch2\u003eWhat is the 3M™ Citrus-Based Industrial Cleaner?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Citrus-Based Industrial Cleaner\u003c\/strong\u003e is a professional degreaser formulated from natural citrus extracts. It targets stubborn soils: grease, oils, tar, adhesives, and bitumen residues.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts effectiveness relies on a plant-based active ingredient, without compromising on degreasing power. It is a serious alternative to conventional petroleum-based solvents.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eComposition and origin: the strength of d-limonene\u003c\/h3\u003e\n\n\u003cp\u003eThe key component of this product is \u003cstrong\u003ed-limonene\u003c\/strong\u003e, a natural solvent extracted from orange and lemon peels. It effectively dissolves fatty substances without the drawbacks of synthetic hydrocarbons.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eD-limonene has a \u003cstrong\u003ehigh flash point\u003c\/strong\u003e, making it safer to handle than many traditional industrial solvents. It is also \u003cstrong\u003ebiodegradable\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer this product for environments where cleaning performance must coexist with safety and environmental requirements.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eHere are the types of soils the product effectively treats:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eMineral greases and motor oils\u003c\/li\u003e\n\n  \u003cli\u003eTar and bituminous residues\u003c\/li\u003e\n\n  \u003cli\u003eGlues and adhesives\u003c\/li\u003e\n\n  \u003cli\u003eIndustrial inks and markings\u003c\/li\u003e\n\n  \u003cli\u003eWaxes and silicones\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eTechnical properties and performance of the 3M™ citrus cleaner\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Citrus-Based Industrial Cleaner\u003c\/strong\u003e is based on natural citrus extracts, primarily \u003cstrong\u003ed-limonene\u003c\/strong\u003e, an organic solvent extracted from orange peels.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThis active compound effectively attacks \u003cstrong\u003emineral greases, cutting oils, bituminous residues, and light adhesives\u003c\/strong\u003e. It penetrates and emulsifies soils without damaging most treated surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts formula is \u003cstrong\u003ebiodegradable\u003c\/strong\u003e and free of chlorinated solvents. This is a practical advantage for workshops subject to strict environmental or regulatory constraints.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe product can be used pure or diluted depending on the level of soiling. For stubborn grease, it is applied concentrated with a few minutes of contact time before rinsing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eFlash point: approximately \u003cstrong\u003e50 °C\u003c\/strong\u003e (less flammable than conventional petroleum solvents)\u003c\/li\u003e\n\n  \u003cli\u003epH: slightly acidic to neutral depending on dilution\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with: \u003cstrong\u003emetals, hard plastics, concrete, vulcanized rubber\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n  \u003cli\u003eNot recommended for: polystyrene, certain elastomers sensitive to solvents\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eProduct\u003c\/th\u003e\n\n      \u003cth\u003eChemical base\u003c\/th\u003e\n\n      \u003cth\u003eBiodegradable\u003c\/th\u003e\n\n      \u003cth\u003eMain uses\u003c\/th\u003e\n\n      \u003cth\u003eFlash point\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e3M™ Citrus Cleaner\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eD-limonene (citrus)\u003c\/td\u003e\n\n      \u003ctd\u003e✅ Yes\u003c\/td\u003e\n\n      \u003ctd\u003eGrease, oil, light adhesives, bitumen\u003c\/td\u003e\n\n      \u003ctd\u003e~50 °C\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e3M™ General Surface Cleaner 3M™ 34846\u003c\/td\u003e\n\n      \u003ctd\u003eAqueous surfactants\u003c\/td\u003e\n\n      \u003ctd\u003e✅ Yes\u003c\/td\u003e\n\n      \u003ctd\u003eLight soiling, daily maintenance\u003c\/td\u003e\n\n      \u003ctd\u003eNot applicable\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eWD-40 Specialist Degreaser\u003c\/td\u003e\n\n      \u003ctd\u003ePetroleum solvents\u003c\/td\u003e\n\n      \u003ctd\u003e❌ No\u003c\/td\u003e\n\n      \u003ctd\u003eHeavy grease, mechanics\u003c\/td\u003e\n\n      \u003ctd\u003e~40 °C\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eLoctite SF 7063\u003c\/td\u003e\n\n      \u003ctd\u003eAcetone \/ alcohol\u003c\/td\u003e\n\n      \u003ctd\u003e❌ No\u003c\/td\u003e\n\n      \u003ctd\u003eDegreasing before bonding, metals\u003c\/td\u003e\n\n      \u003ctd\u003e\u0026lt;20 °C\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to petroleum or chlorinated solvent-based degreasers, the \u003cstrong\u003e3M™ citrus cleaner offers a better safety profile\u003c\/strong\u003e while remaining effective on common workshop grime.\u003c\/p\u003e\u003ch2\u003eIndustrial applications: which surfaces and soils is it for?\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Citrus-Based Industrial Cleaner\u003c\/strong\u003e tackles the most stubborn greasy soils encountered in workshops, maintenance, or production.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts formula with \u003cstrong\u003enatural citrus extracts\u003c\/strong\u003e effectively dissolves grease, mineral oils, adhesive residues, tar, wax, and inks without damaging the surfaces being treated.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eCompatible surfaces\u003c\/h3\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eMetals\u003c\/strong\u003e: steel, aluminum, stainless steel, cast iron\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eHard plastics\u003c\/strong\u003e and composites\u003c\/li\u003e\n\n  \u003cli\u003eConcrete floors, industrial tiles\u003c\/li\u003e\n\n  \u003cli\u003eProduction equipment and conveyors\u003c\/li\u003e\n\n  \u003cli\u003eMechanical parts before assembly or painting\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eTypes of soils targeted\u003c\/h3\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\u003cstrong\u003eCutting oils and lubricating greases\u003c\/strong\u003e\u003c\/li\u003e\n\n  \u003cli\u003eGlue and adhesive residues\u003c\/li\u003e\n\n  \u003cli\u003eTar and bitumen\u003c\/li\u003e\n\n  \u003cli\u003eIndustrial inks and markings\u003c\/li\u003e\n\n  \u003cli\u003eTemporary protective waxes and varnishes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIt is suitable for both \u003cstrong\u003edegreasing before welding\u003c\/strong\u003e and routine cleaning of workstations and machines.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAvoid on painted surfaces sensitive to terpene-based solvents, as well as on certain soft plastics: test beforehand on a hidden area.\u003c\/p\u003e\u003ch2\u003eComparison: 3M™ Citrus Cleaner vs. other industrial degreasers\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe market for industrial degreasers is vast. Chlorinated solvents, petroleum products, aqueous formulas... not all are equal. Here is how the \u003cstrong\u003e3M™ Citrus-Based Industrial Cleaner\u003c\/strong\u003e positions itself against common alternatives.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eComparison table of the main industrial degreasers\u003c\/h3\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eProduct\u003c\/th\u003e\n\n      \u003cth\u003eChemical base\u003c\/th\u003e\n\n      \u003cth\u003eDegreasing efficiency\u003c\/th\u003e\n\n      \u003cth\u003eSafety \/ Toxicity\u003c\/th\u003e\n\n      \u003cth\u003eEnvironmental impact\u003c\/th\u003e\n\n      \u003cth\u003eOdor\u003c\/th\u003e\n\n      \u003cth\u003eTypical uses\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003e3M™ Citrus Cleaner\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eD-Limonene (citrus)\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eLow toxicity\u003c\/td\u003e\n\n      \u003ctd\u003e✅ Biodegradable\u003c\/td\u003e\n\n      \u003ctd\u003eCitrus (pleasant)\u003c\/td\u003e\n\n      \u003ctd\u003eGrease, oil, glue, resins, ink\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003ePetroleum solvent degreaser (e.g., White Spirit)\u003c\/td\u003e\n\n      \u003ctd\u003eAliphatic hydrocarbons\u003c\/td\u003e\n\n      \u003ctd\u003eHigh\u003c\/td\u003e\n\n      \u003ctd\u003eToxic, potential CMR\u003c\/td\u003e\n\n      \u003ctd\u003e❌ Not biodegradable\u003c\/td\u003e\n\n      \u003ctd\u003eStrong, unpleasant\u003c\/td\u003e\n\n      \u003ctd\u003eHeavy grease, paints\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eAlkaline aqueous degreaser (e.g., 3M™ Multi-Purpose Cleaner)\u003c\/td\u003e\n\n      \u003ctd\u003eSurfactants + water\u003c\/td\u003e\n\n      \u003ctd\u003eMedium to high\u003c\/td\u003e\n\n      \u003ctd\u003eVery low toxicity\u003c\/td\u003e\n\n      \u003ctd\u003e✅ Biodegradable\u003c\/td\u003e\n\n      \u003ctd\u003eNeutral or slight\u003c\/td\u003e\n\n      \u003ctd\u003eCommon soiling, food workshops\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eAcetone \/ MEK\u003c\/td\u003e\n\n      \u003ctd\u003eKetones\u003c\/td\u003e\n\n      \u003ctd\u003eVery high\u003c\/td\u003e\n\n      \u003ctd\u003eFlammable, irritant\u003c\/td\u003e\n\n      \u003ctd\u003e❌ High VOCs\u003c\/td\u003e\n\n      \u003ctd\u003eVery strong, sharp\u003c\/td\u003e\n\n      \u003ctd\u003eGlues, varnishes, epoxy resins\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eChlorinated degreaser (e.g., Trichloroethylene)\u003c\/td\u003e\n\n      \u003ctd\u003eHalogenated solvents\u003c\/td\u003e\n\n      \u003ctd\u003eVery high\u003c\/td\u003e\n\n      \u003ctd\u003e⚠️ Proven CMR\u003c\/td\u003e\n\n      \u003ctd\u003e❌ Highly polluting\u003c\/td\u003e\n\n      \u003ctd\u003eStrong, ethereal\u003c\/td\u003e\n\n      \u003ctd\u003eMechanical parts, electronics\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eD-Limonene\u003c\/strong\u003e, the active ingredient in the 3M™ cleaner, offers degreasing power comparable to petroleum solvents, without the associated regulatory constraints.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to chlorinated degreasers, the advantage is clear: \u003cstrong\u003eno CMR classification\u003c\/strong\u003e, no imminent REACH restriction, and handling without heavy protective equipment.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to alkaline aqueous formulas, it excels on \u003cstrong\u003estubborn soils\u003c\/strong\u003e: glues, resins, polymerized cutting oils, where water alone is not enough.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary, it is the ideal choice when you want \u003cstrong\u003emaximum efficiency + operator safety + environmental compliance\u003c\/strong\u003e, without compromise.\u003c\/p\u003e\u003ch2\u003ePrecautions for use, safety, and material compatibility\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3M™ Citrus-Based Industrial Cleaner\u003c\/strong\u003e is formulated from natural solvents, primarily \u003cstrong\u003ed-limonene\u003c\/strong\u003e extracted from citrus peels. Despite its plant-based origin, it remains an active chemical product that requires some precautions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWear \u003cstrong\u003esolvent-resistant gloves\u003c\/strong\u003e (nitrile recommended) and safety glasses during application. Avoid prolonged contact with the skin.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe product is \u003cstrong\u003eflammable\u003c\/strong\u003e: keep away from heat sources, open flames, and sparks. Work in a \u003cstrong\u003ewell-ventilated\u003c\/strong\u003e area to avoid the accumulation of vapors.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaterial compatibility:\u003c\/strong\u003e the cleaner is suitable for most \u003cstrong\u003emetals, steel, and hard surfaces\u003c\/strong\u003e. However, it may attack certain plastics, rubbers, and paints. Always test on a small area before application on a sensitive surface.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eDo not use on \u003cstrong\u003efood surfaces\u003c\/strong\u003e without thorough rinsing. Avoid direct release into drains or natural environments: d-limonene is biodegradable but can be toxic to aquatic organisms at high concentrations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eStore in its \u003cstrong\u003eoriginal packaging\u003c\/strong\u003e, tightly closed, away from heat and frost. Consult the \u003cstrong\u003eSafety Data Sheet (SDS)\u003c\/strong\u003e provided by 3M™ before any first industrial use.\u003c\/p\u003e\u003ch2\u003eFAQ - 3M™ Citrus-Based Industrial Cleaner\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What differentiates a citrus-based cleaner from a standard chemical degreaser?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e3M™ citrus-based cleaner\u003c\/strong\u003e uses d-limonene, a natural solvent extracted from citrus peels. It degreases effectively without resorting to aggressive petroleum solvents like trichloroethylene or perchloroethylene.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. On what types of soils is this product really effective?\u003c\/h3\u003e\n\u003cp\u003eIt tackles \u003cstrong\u003egrease, mineral oils, adhesive residues, tar, and hydrocarbons\u003c\/strong\u003e. It is a solid choice for mechanical workshops, production lines, or industrial maintenance.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. Is this cleaner compatible with all surfaces?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for \u003cstrong\u003emetals, hard plastics, and painted surfaces\u003c\/strong\u003e in most cases. However, it is advisable to test on a small area before application on sensitive materials such as certain elastomers or soft plastics.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Can it be used in confined environments or a closed workshop?\u003c\/h3\u003e\n\u003cp\u003eThanks to its \u003cstrong\u003enatural citrus solvent\u003c\/strong\u003e-based formula, it emits fewer VOCs than traditional petroleum degreasers. Proper ventilation is still recommended for any intensive use in enclosed spaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Is this 3M™ product compliant with current environmental regulations?\u003c\/h3\u003e\n\u003cp\u003eYes. Its natural base positions it favorably against the requirements of \u003cstrong\u003eREACH regulation\u003c\/strong\u003e and the HSE policies of many industries. It is a concrete argument for sites subject to regular environmental audits.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. At Dagobert Industrie, why do we offer this product rather than a generic degreaser?\u003c\/h3\u003e\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we select references that combine field performance with manufacturer reliability. The 3M™ citrus cleaner checks both boxes: a globally recognized brand and a formula that reduces operator exposure to \u003cstrong\u003ehazardous substances\u003c\/strong\u003e.\u003c\/p\u003e","brand":"3M™","offers":[{"title":"500 ml \/ transparent","offer_id":58488302371199,"sku":"3M_7100178338","price":34.49,"currency_code":"EUR","in_stock":true},{"title":"200 ml \/ transparent","offer_id":58488302403967,"sku":"3M_7100178336","price":16.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/nettoyant-industriel-a-base-d-agrumes-3m.jpg?v=1789990090"},{"product_id":"ponceuse-orbitale-dynabrader-nitro-dn1","title":"Dynabrade® NITRO DN1 Orbital Sander","description":"\u003ch2\u003eDynabrade® NITRO DN1 Orbital Sander, Precision and performance for industrial sanding\u003c\/h2\u003e\u003cbr\u003e\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DN1\u003c\/strong\u003e is a \u003cstrong\u003epneumatic orbital sander\u003c\/strong\u003e designed for demanding industrial environments. Lightweight and well-balanced, it reduces fatigue during long work cycles.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eIts \u003cstrong\u003eNITRO motor\u003c\/strong\u003e delivers constant power with low air consumption. Ideal for \u003cstrong\u003efinishing sanding\u003c\/strong\u003e on metal, composite, or automotive bodywork.\u003c\/p\u003e\u003cbr\u003e\n\u003cp\u003eWith the \u003cstrong\u003eNITRO DN1\u003c\/strong\u003e, Dynabrade confirms its expertise in \u003cstrong\u003eprecision abrasive tools\u003c\/strong\u003e. A tool designed for professionals who do not compromise on surface quality.\u003c\/p\u003e\u003ch2\u003eOverview of the Dynabrade® NITRO DN1 orbital sander\u003c\/h2\u003e\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DN1 orbital sander\u003c\/strong\u003e is a pneumatic tool designed for demanding industrial environments. It is aimed at professionals who do not compromise on finish quality.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer it as a solid reference for sanding metal, composite, or wood surfaces.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eDesign and NITRO technology: what sets the DN1 apart\u003c\/h3\u003e\n\n\u003cp\u003eThe Dynabrade® \u003cstrong\u003eNITRO\u003c\/strong\u003e range is based on a pneumatic motor optimized to deliver constant power, even under prolonged load. The motor is designed to operate with minimal vibration transmitted to the operator.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe DN1 features a \u003cstrong\u003espeed regulation system\u003c\/strong\u003e that keeps the abrasion rate stable, regardless of the pressure applied to the surface. The result is a uniform finish, free of marks or irregularities.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe housing is compact and balanced. The grip remains comfortable during long work sessions, which reduces operator fatigue.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eKey features of the NITRO DN1 technology:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eHigh-performance pneumatic motor\u003c\/strong\u003e with low vibration levels\u003c\/li\u003e\n\n  \u003cli\u003eSpeed regulation under load for constant abrasion\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eErgonomic design\u003c\/strong\u003e suitable for intensive use\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with standard abrasives on the market\u003c\/li\u003e\n\n  \u003cli\u003eRobust construction for industrial environments\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eDynabrade® is recognized worldwide for the reliability of its abrasive tools. The \u003cstrong\u003eNITRO DN1\u003c\/strong\u003e continues this tradition by combining durability, precision, and ease of use.\u003c\/p\u003e\u003ch2\u003eTechnical specifications of the Dynabrade® NITRO DN1\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DN1\u003c\/strong\u003e is a pneumatic orbital sander designed for demanding industrial applications. Its compressed air motor delivers constant power, even during prolonged use.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003erandom orbital motion\u003c\/strong\u003e eliminates circular sanding marks. The result is a homogeneous surface, ready for the application of paint or varnish.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ealuminum alloy\u003c\/strong\u003e housing offers an excellent strength-to-weight ratio. The grip is ergonomic, which reduces fatigue during long work sessions.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003ePad diameter\u003c\/strong\u003e: 150 mm\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eOrbit\u003c\/strong\u003e: 3 mm\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFree speed\u003c\/strong\u003e: 12,000 RPM\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAir consumption\u003c\/strong\u003e: approximately 170 l\/min\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eRecommended operating pressure\u003c\/strong\u003e: 6.2 bar\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eWeight\u003c\/strong\u003e: approximately 0.9 kg\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eAbrasive attachment\u003c\/strong\u003e: Velcro (hook-and-loop)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003ePad diameter\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eFree speed\u003c\/th\u003e\n\n      \u003cth\u003eTypical usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eDynabrade® NITRO DN1\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e12,000 RPM\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork finishing, flat surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynabrade® 59027\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e6 mm\u003c\/td\u003e\n\n      \u003ctd\u003e10,000 RPM\u003c\/td\u003e\n\n      \u003ctd\u003eSanding, fast material removal\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS 150\/3 EQ\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e6,000-10,000 RPM\u003c\/td\u003e\n\n      \u003ctd\u003eWood and lacquer finishing, workshop use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3,200 RPM\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork polishing, paint correction\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe DN1's \u003cstrong\u003esmall 3 mm orbit\u003c\/strong\u003e clearly positions it for fine finishing, where control takes priority over removal speed. It is the right tool for the final passes before painting.\u003c\/p\u003e\u003ch2\u003eApplications and materials compatible with the NITRO DN1\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DN1\u003c\/strong\u003e is designed for demanding industrial sanding. It adapts to a wide range of materials and surface configurations.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003eSanding flat panels, edges, and complex surfaces\u003c\/h3\u003e\n\n\u003cp\u003eOn \u003cstrong\u003eflat panels\u003c\/strong\u003e, the NITRO DN1 delivers a regular, mark-free cut. Its random orbital motion prevents streaks and ensures a uniform finish.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eEdges and contours\u003c\/strong\u003e are also accessible thanks to the tool's compact size. The backing pad remains in constant contact, even on slightly curved geometries.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor \u003cstrong\u003ecomplex surfaces\u003c\/strong\u003e, recessed areas, angles, joints, the NITRO DN1 maintains its efficiency where rigid-pad sanders struggle.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible materials:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eSolid wood and derived panels\u003c\/strong\u003e (MDF, plywood, particleboard)\u003c\/li\u003e\n\n  \u003cli\u003e\n\n\u003cstrong\u003eFerrous and non-ferrous metals\u003c\/strong\u003e (steel, aluminum, stainless steel)\u003c\/li\u003e\n\n  \u003cli\u003eComposites and laminated materials\u003c\/li\u003e\n\n  \u003cli\u003eTechnical plastics and resins\u003c\/li\u003e\n\n  \u003cli\u003ePainted or primed surfaces (inter-coat sanding)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn bodywork, industrial carpentry, or furniture manufacturing, the NITRO DN1 covers \u003cstrong\u003ethe entire sanding cycle\u003c\/strong\u003e: roughing, tinting, and fine finishing.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eSander\u003c\/th\u003e\n\n      \u003cth\u003eManufacturer\u003c\/th\u003e\n\n      \u003cth\u003eMotion type\u003c\/th\u003e\n\n      \u003cth\u003eTarget materials\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eNITRO DN1\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n      \u003ctd\u003eWood, metal, composite, plastic\u003c\/td\u003e\n\n      \u003ctd\u003eVersatile industrial sanding\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynaPad® 40318\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n      \u003ctd\u003eWood, painted surfaces\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, large surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eETS 150\/3 EQ\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n      \u003ctd\u003eWood, lacquer, plaster\u003c\/td\u003e\n\n      \u003ctd\u003eHigh-end finishing, carpentry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eGEX 125-1 AE\u003c\/td\u003e\n\n      \u003ctd\u003eBosch Professional\u003c\/td\u003e\n\n      \u003ctd\u003eRandom orbital\u003c\/td\u003e\n\n      \u003ctd\u003eWood, metal, plastic\u003c\/td\u003e\n\n      \u003ctd\u003eGeneral workshop use\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eComparison: Dynabrade® NITRO DN1 versus other orbital sanders on the market\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DN1\u003c\/strong\u003e is positioned in the category of high-end compressed air orbital sanders. Here is how it compares to common competing references.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ctable\u003e\n\n  \u003cthead\u003e\n\n    \u003ctr\u003e\n\n      \u003cth\u003eModel\u003c\/th\u003e\n\n      \u003cth\u003eManufacturer\u003c\/th\u003e\n\n      \u003cth\u003eOrbit\u003c\/th\u003e\n\n      \u003cth\u003eSpeed (RPM)\u003c\/th\u003e\n\n      \u003cth\u003ePad\u003c\/th\u003e\n\n      \u003cth\u003eWeight\u003c\/th\u003e\n\n      \u003cth\u003eMain usage\u003c\/th\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/thead\u003e\n\n  \u003ctbody\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003e\u003cstrong\u003eNITRO DN1\u003c\/strong\u003e\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e12,000\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~0.9 kg\u003c\/td\u003e\n\n      \u003ctd\u003eFinishing, bodywork, industry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eDynaPro® 56831\u003c\/td\u003e\n\n      \u003ctd\u003eDynabrade®\u003c\/td\u003e\n\n      \u003ctd\u003e2.5 mm\u003c\/td\u003e\n\n      \u003ctd\u003e10,000\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.1 kg\u003c\/td\u003e\n\n      \u003ctd\u003eFine finishing, delicate surfaces\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFlex XCE 150.8\u003c\/td\u003e\n\n      \u003ctd\u003eFlex\u003c\/td\u003e\n\n      \u003ctd\u003e8 mm\u003c\/td\u003e\n\n      \u003ctd\u003e5,000\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.8 kg\u003c\/td\u003e\n\n      \u003ctd\u003eMaterial removal, roughing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eRupes LHR 15 Mark III\u003c\/td\u003e\n\n      \u003ctd\u003eRupes\u003c\/td\u003e\n\n      \u003ctd\u003e15 mm\u003c\/td\u003e\n\n      \u003ctd\u003e3,000\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~2.1 kg\u003c\/td\u003e\n\n      \u003ctd\u003eBodywork polishing, detailing\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n    \u003ctr\u003e\n\n      \u003ctd\u003eFestool ETS EC 150\/3\u003c\/td\u003e\n\n      \u003ctd\u003eFestool\u003c\/td\u003e\n\n      \u003ctd\u003e3 mm\u003c\/td\u003e\n\n      \u003ctd\u003e10,000\u003c\/td\u003e\n\n      \u003ctd\u003e150 mm\u003c\/td\u003e\n\n      \u003ctd\u003e~1.4 kg\u003c\/td\u003e\n\n      \u003ctd\u003eWood finishing, carpentry\u003c\/td\u003e\n\n    \u003c\/tr\u003e\n\n  \u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNITRO DN1 stands out for its lightness\u003c\/strong\u003e: at under 900g, it causes significantly less operator fatigue during an intensive workday than the Festool ETS EC 150\/3 or the Rupes LHR 15.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIts \u003cstrong\u003esmall 3 mm orbit\u003c\/strong\u003e destines it for \u003cstrong\u003eprecise finishing\u003c\/strong\u003e, not for raw material removal. For that, an orbit of 8 mm or more (like the Flex XCE) would be more suitable.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eCompared to the DynaPro® 56831 from the same brand, the NITRO DN1 offers higher speed and responsiveness, while maintaining a \u003cstrong\u003econtrolled level of vibration\u003c\/strong\u003e thanks to its NITRO pneumatic technology.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eIn summary, the \u003cstrong\u003eDynabrade® NITRO DN1\u003c\/strong\u003e is the right choice for:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eDemanding \u003cstrong\u003eindustrial finishing\u003c\/strong\u003e applications\u003c\/li\u003e\n\n  \u003cli\u003eHigh-pace workstations (ergonomics priority)\u003c\/li\u003e\n\n  \u003cli\u003eEnvironments where \u003cstrong\u003epneumatic supply\u003c\/strong\u003e is available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eUsage tips and maintenance for the NITRO DN1 orbital sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003cp\u003eThe Dynabrade \u003cstrong\u003eNITRO DN1 orbital sander\u003c\/strong\u003e is built to last. A few good practices are enough to maintain its performance over time.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eBefore each use, check that the \u003cstrong\u003eabrasive disc is correctly centered\u003c\/strong\u003e on the pad. A poorly positioned disc creates parasitic vibrations and accelerates bearing wear.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eSet the \u003cstrong\u003eair pressure between 6.2 and 6.9 bar\u003c\/strong\u003e (90-100 psi). Excessive pressure overheats the pneumatic motor and reduces its lifespan. Pressure that is too low compromises cutting speed.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eWork with \u003cstrong\u003elight and even downward pressure\u003c\/strong\u003e on the surface. Letting the tool's weight do the work avoids sanding marks and preserves the pad.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAlways use an \u003cstrong\u003ein-line pneumatic lubricant\u003c\/strong\u003e, or add a few drops of air tool oil directly into the air intake before each session. Neglecting this is the primary cause of premature failure.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eRegularly clean the \u003cstrong\u003eair filter\u003c\/strong\u003e and check the condition of the Velcro pad. A clogged or loose pad degrades abrasive adhesion and distorts the surface finish.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eFor periodic maintenance, here are the points to check:\u003c\/p\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eInspection of the \u003cstrong\u003eorbital bearing\u003c\/strong\u003e every 3 months during intensive use\u003c\/li\u003e\n\n  \u003cli\u003eReplacement of the \u003cstrong\u003ebacking pad\u003c\/strong\u003e at the first signs of Velcro wear\u003c\/li\u003e\n\n  \u003cli\u003eVerification of the airtightness of \u003cstrong\u003epneumatic connections\u003c\/strong\u003e to avoid pressure drops\u003c\/li\u003e\n\n  \u003cli\u003eLubrication of internal moving parts according to \u003cstrong\u003eDynabrade\u003c\/strong\u003e recommendations\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cbr\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we recommend entrusting the annual overhaul to a qualified technician to ensure the tool complies with current safety standards.\u003c\/p\u003e\u003ch2\u003eFAQ - Dynabrade® NITRO DN1 Orbital Sander\u003c\/h2\u003e\u003cbr\u003e\n\n\u003ch3\u003e1. What is the difference between the NITRO DN1 and a standard orbital sander?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDynabrade® NITRO DN1\u003c\/strong\u003e incorporates NITRO technology, which uses compressed nitrogen instead of conventional compressed air. The result is a significantly longer motor lifespan and stable performance over time.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e2. On which materials can the NITRO DN1 be used?\u003c\/h3\u003e\n\u003cp\u003eIt is suitable for a wide range of surfaces: \u003cstrong\u003emetal, steel, aluminum, composite, and plastic\u003c\/strong\u003e. It is particularly well-suited for finishing applications in the automotive, aerospace, and metal fabrication industries.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e3. What pad diameter and abrasive grit should be used?\u003c\/h3\u003e\n\u003cp\u003eThe NITRO DN1 accepts \u003cstrong\u003e150 mm\u003c\/strong\u003e pads, the most common size in industrial sanding. For finishing, one generally starts with P320 to P800 grits. For roughing or inter-coat sanding, P80 to P180 grits are recommended.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e4. Is the NITRO DN1 suitable for intensive use in production?\u003c\/h3\u003e\n\u003cp\u003eYes, that is precisely its purpose. The \u003cstrong\u003erobust Dynabrade® design\u003c\/strong\u003e and the NITRO system make it reliable in continuous cycles. At \u003cstrong\u003eDagobert Industrie\u003c\/strong\u003e, we offer it to workshops looking to reduce machine downtime and maintenance costs.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e5. Is a specific fitting required for the nitrogen supply?\u003c\/h3\u003e\n\u003cp\u003eYes, the nitrogen circuit requires a \u003cstrong\u003ededicated connection\u003c\/strong\u003e, separate from the standard compressed air network. A suitable pressure regulator is essential. Dynabrade® provides precise technical specifications in the product documentation.\u003c\/p\u003e\n\n\u003cbr\u003e\n\n\u003ch3\u003e6. What is the rotational speed of the NITRO DN1?\u003c\/h3\u003e\n\u003cp\u003eThe NITRO DN1 runs at \u003cstrong\u003e12,000 RPM\u003c\/strong\u003e at no load, with a 3 mm orbit. This setting offers a good balance between \u003cstrong\u003ematerial removal aggression\u003c\/strong\u003e and final surface quality, with no visible tool marks.\u003c\/p\u003e","brand":"Dynabrade","offers":[{"title":"32 \/ 8500 rpm","offer_id":58488309350783,"sku":"DYNA_DN1","price":450.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/ponceuse-orbitale-dynabradeR-nitro-dn1.jpg?v=1789990273"},{"product_id":"pistolet-colle-thermofusible-3m-tc-tc-q-gen-ii","title":"3M TC\/TC-Q Gen II Hot Melt Glue Gun, 220 V","description":"\u003ch2\u003e3M TC\/TC-Q Gen II Hot Melt Glue Gun, 220 V\u003c\/h2\u003e\n\u003cp\u003eElectric gun for 3M hot melt glue sticks with a 16 mm diameter, short (TC) or long (Q). Suitable for standard 3M hot melt adhesives. For low-temperature LM grades, choose the LT version.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eDesigned for 3M hot melt glue sticks.\u003c\/li\u003e\n\n\u003cli\u003eLightweight and balanced, with an ergonomic handle for controlled application.\u003c\/li\u003e\n\n\u003cli\u003eFeed mechanism designed to reduce drips and waste.\u003c\/li\u003e\n\n\u003cli\u003eStroke adjustment for precise dispensing of each application of glue.\u003c\/li\u003e\n\n\u003cli\u003e220 V power supply, European plug.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible Dagobert Adhesives\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-3738\"\u003e3M 3738 Hot Melt Adhesive\u003c\/a\u003e (16 x 203.2 mm stick)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-3748\"\u003e3M 3748 Hot Melt Adhesive\u003c\/a\u003e (16 x 50.8 mm and 16 x 203.2 mm sticks)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-scotch-weld-3762\"\u003e3M Scotch-Weld 3762 Hot Melt Adhesive\u003c\/a\u003e (16 x 50.8 mm and 16 x 203.2 mm sticks)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-3764\"\u003e3M 3764 Hot Melt Adhesive\u003c\/a\u003e (16 x 203.2 mm stick)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-3779\"\u003e3M 3779 Hot Melt Adhesive\u003c\/a\u003e (16 x 50 mm and 16 x 203.2 mm sticks)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-3789\"\u003e3M 3789 Hot Melt Adhesive\u003c\/a\u003e (16 x 203.2 mm stick)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-3792\"\u003e3M 3792 Hot Melt Adhesive\u003c\/a\u003e (16 x 50.8 mm and 16 x 203.2 mm sticks)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e3M Reference\u003c\/td\u003e\n\n\u003ctd\u003e7100255953\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSticks\u003c\/td\u003e\n\n\u003ctd\u003e16 mm diameter, TC and Q sizes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAdhesives\u003c\/td\u003e\n\n\u003ctd\u003eStandard 3M hot melt adhesives\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\n\u003ctd\u003e220 V, European plug\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePackaged dimensions\u003c\/td\u003e\n\n\u003ctd\u003e320 x 250 x 85 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePackaged weight\u003c\/td\u003e\n\n\u003ctd\u003e1.15 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eInformation issued from 3M manufacturer data.\u003c\/p\u003e","brand":"3M™","offers":[{"title":"Default Title","offer_id":58648877269375,"sku":"3M_7100255953","price":179.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/9717a3c2bac98d030513d26acf9a4cefec5e2c1a.jpg?v=1791457714"},{"product_id":"pistolet-colle-thermofusible-basse-temperature-3m-tc-tc-q-lt-gen-ii","title":"3M TC\/TC-Q LT Gen II Low-Temperature Hot Melt Glue Gun, 220 V","description":"\u003ch2\u003e3M TC\/TC-Q LT Gen II Low-Temperature Hot Melt Glue Gun, 220 V\u003c\/h2\u003e\n\u003cp\u003eLow-temperature (LT) version of the 3M TC\/TC-Q gun, for 3M low-temperature hot melt glue sticks with a 16 mm diameter, LM grades. These adhesives are suitable for heat-sensitive substrates.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eDesigned for 3M hot melt glue sticks.\u003c\/li\u003e\n\n\u003cli\u003eLightweight and balanced, with an ergonomic handle for controlled application.\u003c\/li\u003e\n\n\u003cli\u003eFeed mechanism designed to limit drips and waste.\u003c\/li\u003e\n\n\u003cli\u003eStroke adjustment for precise dosing of each application of glue.\u003c\/li\u003e\n\n\u003cli\u003e220 V power supply, European plug.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible Dagobert Adhesives\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-scotch-weld-3762\"\u003e3M Scotch-Weld 3762 Hot Melt Adhesive\u003c\/a\u003e (3762LMQ, 16 x 200 mm stick)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/colle-thermofusible-3m-3792\"\u003e3M 3792 Hot Melt Adhesive\u003c\/a\u003e (3792LMQ, 16 x 200 mm stick)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e3M Reference\u003c\/td\u003e\n\n\u003ctd\u003e7100255832\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSticks\u003c\/td\u003e\n\n\u003ctd\u003e16 mm diameter, TC and Q formats\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAdhesives\u003c\/td\u003e\n\n\u003ctd\u003e3M low-temperature hot melt (LM)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\n\u003ctd\u003e220 V, European plug\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePackaged dimensions\u003c\/td\u003e\n\n\u003ctd\u003e320 x 250 x 85 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePackaged weight\u003c\/td\u003e\n\n\u003ctd\u003e1.15 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eInformation based on 3M manufacturer data.\u003c\/p\u003e","brand":"3M™","offers":[{"title":"Default Title","offer_id":58648877302143,"sku":"3M_7100255832","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/93af89f66e3bdceb7c0bd3c16fb41f1656deaed0.jpg?v=1791457716"},{"product_id":"module-weldas-comboframe-orientable-1-8-x-1-8-m-ou-1-8-x-2-4-m","title":"Weldas Comboframe swivelling module 1.8 x 1.8 m or 1.8 x 2.4 m","description":null,"brand":"Weldas","offers":[{"title":"Default Title","offer_id":58883432808831,"sku":"WEDA_558668","price":129.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/4408\/7167\/files\/55-8668_jpeg.jpg?v=1792413459"}],"url":"https:\/\/dagobertindustrie.com\/en\/collections\/pieces-detachees-de-postes-autres.oembed","provider":"Dagobert Industrie","version":"1.0","type":"link"}